







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in East Whittier, CA
We provide independent CGI service across East Whittier, from cabinet installation and refacing to full kitchen remodels built around CGI boxes, doors, and fronts. What makes our CGI work here different is the housing stock itself: nearly every East Whittier kitchen we walk into sits inside a 1950s or 1960s tract home, so the job is less about hanging cabinets and more about fitting them to walls that were never plumb to begin with. Our technicians have up to 12 years of experience with CGI lines, and our work is backed by the 730-Day Done Right Promise. Call (888) 255-8179 to schedule your free estimate.

Why East Whittier Residents Choose Us for CGI Service

We know CGI cabinetry from the install side. CGI is a national brand sold through dealer networks, so we’re not tied to any one retailer or showroom, and that independence is the point. We’ve set enough of these boxes to know which lines assemble clean and which ones need extra glue and fasteners in the joints before they ever hit the wall.
East Whittier homes ask a lot of a cabinet installer. The walls are stucco over wood frame, they’ve had 60-plus years to move, and the floors in older kitchens are rarely level. We plan fillers, scribe molding, and shim strategy before the first box goes in, so the reveals stay even and the doors don’t rub six months later.
We’re an independent CGI service provider, not manufacturer-affiliated or authorized by CGI. What we offer instead is familiarity: OEM-compatible doors, drawer boxes, and hardware where the line is still in production, and honest guidance when refacing makes more sense than a tear-out. Calls are answered by a live person 24/7, and every technician is background-checked and arrives in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in East Whittier
Most of the CGI issues we correct in East Whittier come down to installation, not the product. Here’s what we see most:
- Racked RTA cabinet boxes. Ready-to-assemble CGI boxes that were assembled without glue or with under-driven fasteners loosen at the joints. In a 1950s East Whittier kitchen, the floor-to-ceiling gap is never even, so the box gets shimmed unevenly and the whole carcass starts to twist. We re-square, re-glue, and reset the box properly.
- Edge wear and hinge pull-out near the range and sink. The more economical CGI finishes show wear fastest where East Whittier’s dry summer heat meets kitchen humidity. Hinge screws pull out of the door fronts first. We replace the fronts with OEM-matched doors and add proper hinge reinforcement.
- Swollen sink bases and dishwasher openings. Particleboard and thin-skin box panels swell when a slow supply-line or drain weep goes unnoticed behind the cabinet. By the time you see it, the base floor is soft. A swollen box gets replaced, not patched.
- Uneven reveals against out-of-plumb walls. Original tract-home walls lean. Cabinets set tight against them end up with rubbing doors and gappy seams unless fillers and scribe molding are planned from the start. We build that into every layout.
- Wiring and framing discovered mid-job. Pulling a permit for a kitchen often turns up unpermitted electrical or structural work from a prior owner, especially in East Whittier’s converted garages and back rooms. That has to be corrected before new CGI boxes go in.
CGI Service in East Whittier: What Local Conditions Mean for Your Equipment
Here’s the local fact that shapes almost every CGI cabinet job in East Whittier: a large share of the original tract garages in these neighborhoods were converted by prior owners without permits. That matters to cabinet work because a kitchen or ADU project that starts with a permit pull often uncovers unpermitted wiring or framing in the adjacent space, and that has to be corrected before new boxes go against the wall. It’s why a straightforward CGI installation in East Whittier can grow a day or two. We plan for it. When we template a run of cabinets, we also open the panel and check whether the 100-amp service has room for a dedicated range hood or dishwasher circuit, because adding those later is far more disruptive than doing it while the old cabinets are already out.
CGI Models & Products We Service in East Whittier
We regularly work with CGI Ready-to-Assemble all-wood cabinet lines, the assembled and finished collections in shaker and raised-panel door styles, CGI vanity and bath cabinet programs, and CGI refacing door and veneer product lines. Parts are sourced per job based on what’s still in production and what matches your existing finish, so we don’t claim to stock anything locally. Where a CGI line is still active, we order OEM doors, drawer boxes, hinges, and fillers so the finish and hardware match across the whole run. When a line has been discontinued, we source the closest quality aftermarket match and tell you upfront how close it’ll be. Every install is covered by our 730-Day Done Right Promise. Call (888) 255-8179 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in East Whittier
What you pay depends on the scope. A single cabinet swap costs far less than a full kitchen, and the condition of the walls and wiring behind the old boxes is the biggest variable in East Whittier. Here’s what our projects typically run:

| Service | Typical Cost Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
Every estimate comes with upfront pricing, written line by line, so the number you see is the number you pay. We also offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (888) 255-8179 to schedule your free estimate.
Serving East Whittier, CA – Our Local Coverage Area
We serve East Whittier and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in East Whittier
Yes, in most cases the original walls stay. We plan fillers and scribe molding to absorb the out-of-plumb condition, and we shim the boxes level rather than trying to flatten the wall. The one thing that does get opened is the electrical panel, since a new range hood or dishwasher usually needs a dedicated circuit. Call (888) 255-8179 for a free estimate and we’ll tell you what your specific kitchen needs.
Repair first if the box is structurally sound, but replace it if the box is water-swollen or racked at the joints. Loose boxes usually mean the RTA carcass wasn’t glued or was under-fastened at assembly, and re-squaring plus proper fastening often solves it. Swollen or delaminated panels at the sink base are the exception; patching those never holds. Call (888) 255-8179 and we’ll take a look.
Refacing is often the honest answer when the CGI boxes are solid and the doors are just dated or worn. You get new fronts and veneer for a fraction of a tear-out, and the layout stays intact. Full replacement makes more sense when the boxes are failing or you’re changing the layout. Call (888) 255-8179 for a free estimate and we’ll give you a straight comparison.
Expect a longer timeline, and expect surprises in the walls. East Whittier’s permit reviews are strict, especially for second units, and older homes often reveal unpermitted prior work once an inspector looks. That work has to be corrected before the job can close out. We pull the permits and manage the inspections. Call (888) 255-8179 to schedule your free estimate.
Yes, with two caveats. The dry heat cycles hard on the more economical finish options, so edge wear near the range shows up faster here than in cooler climates. And when a slow supply-line weep goes unnoticed behind the sink base, the swelling starts before you see anything. Both are manageable with quality finish selection and a quick annual check under the sink. Call (888) 255-8179 for an exact quote – estimates are free.
Service Areas Near East Whittier
We also work with homeowners in South Whittier, La Mirada, Downey, Norwalk, Bellflower, Santa Fe Springs, Pico Rivera, and West Whittier-Los Nietos. If you’re anywhere in the East Whittier service area and thinking about a CGI cabinet or kitchen project, we can help.
Book Your CGI Service in East Whittier Today
Whether it’s a cabinet refacing or a full kitchen remodel built around CGI boxes, we’ll give you a written, line-item estimate and a clear timeline. Cabinetry work is genuinely urgent for some homeowners, so call (888) 255-8179 to check availability. Live person, 24/7. From foundation to finish line.
Written by the team at Groundwork Construction Co.












