







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Downey Owner’s Guide
We install KraftMaid cabinetry and the hardware, organizers and trim that go with it throughout Downey, and a full kitchen remodel with KraftMaid runs $14,000 – $45,000 installed, while a cabinet-only installation lands at $4,000 – $13,000. Most Downey owners don’t arrive at this page because a door fell off. They arrive because a drawer that used to glide now grinds, a soft-close hinge stopped catching in the last inch, or a slide-out shelf in a KraftMaid base cabinet has started sagging under the weight of cast iron. That small failure is usually the first thing that sends someone looking for replacement parts, and the second thing they discover is that matching a KraftMaid part to the right cabinet is harder than it looks.

Groundwork Construction Co. of Downey is an independent service provider and is not affiliated with KraftMaid. We work with KraftMaid-compatible cabinetry and hardware as part of full kitchen remodels, and we’ll tell you plainly when a part swap makes sense and when the smarter money goes into a new box.
Key Takeaways
- KraftMaid parts are matched by series, box size and hinge/slide generation, not by how the old part looks.
- Most single-part fixes are a diagnostic first, a purchase second. Guessing the part is how people waste two trips and a Saturday.
- Cabinet hardware and door work is safe to check yourself. Anything involving gas, electrical or structural modification inside a wall is not.
- Full KraftMaid kitchen remodels in Downey run $14,000 – $45,000, covered by our 730-Day Done Right Promise.
Which KraftMaid Models This Applies To

KraftMaid doesn’t sell parts by model year the way a carmaker does. Cabinets are built to a series and a box specification, and the part you need is identified by three things: the cabinet line (KraftMaid’s door styles and finishes sit inside product families, and the interior hardware generation shifts between them), the box dimensions, and the hinge or slide type physically mounted to your door or drawer.
Here’s the compatibility gotcha that trips up most Downey owners: KraftMaid has used more than one soft-close hinge generation across its lines, and the mounting plate pattern and overlay geometry differ between them. A hinge that looks identical in a photo can be the wrong generation, and it will bind, gap the door or refuse to close the last quarter inch. The same holds for drawer slides. Undermount slide lengths are measured to the box depth, and a slide that’s 1/2 inch off will bolt up fine and then catch.
The reliable way to identify your part is to read the label inside the cabinet door or on the back of the drawer box, then measure the box opening yourself. Where a KraftMaid OEM part is still available, match it. Where it isn’t, a quality aftermarket hinge or slide from a known hardware maker is a legitimate substitute if the mounting pattern matches, and we’ll say so rather than push you toward a full replacement you don’t need. If your kitchen also includes Cambria or Silestone counters, note that pulling and reinstalling a base cabinet to reach a slide can disturb the counter connection, which is the one part of this job most owners underestimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
- The door won’t stay closed, or gaps at the top. The soft-close hinge has lost its dampening or the mounting plate has wallowed out of the screw holes. Repeated opening under a heavy door is the usual cause.
- A drawer grinds or pulls unevenly. The undermount slide is worn, or the box has racked slightly out of square. On older KraftMaid boxes, particleboard swell around the slide screws is common after a slow leak under the sink.
- The pull-out shelf sags under load. The slide is rated for less weight than it’s carrying, or the rear mounting has loosened from the cabinet back. Heavy cookware in a 24-inch base is the classic offender.
- A soft-close drawer slams shut. The dampening mechanism in the slide has failed. It’s a wear item, not a defect, and it fails faster in kitchens with daily heavy use.
- Doors rub the frame or each other. Hinge adjustment has drifted, or the cabinet box has moved with the house. In Downey’s older housing stock, seasonal movement and slab settling show up in cabinet alignment before almost anywhere else.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Pricing below reflects Downey market rates, and every quote we write is line-item, upfront and fixed. The number you see is the number you pay.
| Scope | Installed Price Range |
|---|---|
| Kitchen remodel with KraftMaid cabinetry | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation (KraftMaid) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range on cabinet work is box count, door style, finish, and whether the layout changes plumbing or electrical. A straight swap of the same footprint sits at the low end. Adding an island, moving the sink, or upgrading to a premium finish pushes toward the top. Hardware and part replacement is quoted as its own line so you can see exactly what the part costs versus the labor to fit and adjust it. All of it is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
You can safely do the diagnosis yourself. Open the door, read the label, measure the box, photograph the hinge or slide from straight on, and check whether the screws have pulled out. That information is what makes a parts conversation productive instead of a guessing game.
Where DIY goes wrong: re drilling a stripped hinge plate into a cabinet stile can split the wood, and tightening an undermount slide that’s out of square will wear the new part out in months. Two things are genuinely unsafe to handle yourself, and we’ll be blunt about them. Any work that requires shutting off or altering gas service to a range, and any electrical work behind the cabinet wall, belongs to a licensed trade. Do not open a gas line or a junction box to make a cabinet fit. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and calls are answered by a live person 24/7. Call (888) 255-8179 to schedule a free estimate.
FAQs

Expect 10 to 15 years from soft-close hinges and undermount slides under normal daily use in a Downey kitchen, and closer to 7 to 10 on the slide that holds the heavy cookware drawer. Heat and humidity cycling in Southern California kitchens speeds up dampening failure, so the slide nearest the range usually goes first.
Often yes. Hinge adjustment, screw-hole repair with a hardwood dowel, and slide re-seating solve a good share of the calls we get, and we’ll tell you when that’s the honest answer. If the dampening cartridge inside the hinge has failed, replacement is the only real fix, because it isn’t a serviceable component.
A single hinge or slide set is typically a short visit, and most single-part jobs finish in one trip. If the counter has to be loosened to pull a base cabinet, plan on a longer window and a re-set of the counter seam. We confirm the scope before anyone shows up.
We match from the label inside your cabinet plus your measurements, then verify the hinge generation or slide length before ordering. We don’t carry parts, so the part is ordered to your cabinet, not pulled off a shelf and hoped to fit. If an OEM part is discontinued, we identify a quality aftermarket equivalent with a matching mounting pattern and say so upfront, including whether Cambria, Silestone or Kohler components adjacent to the work need any attention.
If you’re weighing a part fix against a full remodel, we’ll price both in writing so the decision is yours. Call (888) 255-8179 for a free estimate, and ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












