







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Home Additions & ADU: The Downey Owner’s Guide
If you’re adding onto a Downey home or converting a garage into a rental unit, we build Cambria quartz surfaces into those spaces – kitchenettes, bathroom vanities, laundry counters, and full ADU kitchens – and a typical Cambria-included home addition in Downey runs $45,000 to $130,000, while a full ADU build runs $90,000 to $220,000. Timelines depend on plan check and inspection schedules, not same-day turnaround, so we quote the schedule in writing before work starts.

Owners usually discover the failure the same way. A countertop seam in a new addition starts telegraphing a hairline crack within a year of install. Or a garage-conversion vanity top chips at the front edge because the cabinet beneath it was shimmed uneven. The stone gets blamed, but the cause is almost always the substrate, the overhang, or the cutout – not the slab itself. That distinction matters before anyone quotes you a replacement.
Which Cambria Models This Applies To

Cambria is a brand of quartz surface, not a machine with a model plate, so “which model” here means which slab series and which application. Cambria’s lines – Brittanicca, Ella, Torquay, Skokiaan, and the rest of the catalog – all share the same core: roughly 93% quartz by volume with a polymer binder, sold in standard slabs about 2 cm or 3 cm thick. For an addition or ADU, that means the surface is specified by series name, thickness, edge profile, and whether it’s used on a kitchen island, a perimeter run, or a bathroom vanity.
The compatibility gotcha is thickness and substrate. A 2 cm slab needs full plywood or cement backer support across its entire span. A 3 cm slab can span a dishwasher gap on its own. If a Downey addition was framed and finished with a thin substrate, a heavier slab choice can crack at a cutout even though the slab itself is fine. Identify what you have by measuring slab thickness at an unfinished edge and checking the cabinet box depth – typically 24 inches for base cabinets in an ADU kitchenette, 21 inches for a bathroom vanity. That measurement drives the cutout plan and the overhang limit.
OEM versus aftermarket only matters for fabrication and installation, not for the slab. Cambria fabricates from authorized shops with a documented edge and finish spec; an independent fabricator can match the spec, but the workmanship warranty is on the installer. We’ve built Cambria into addition and ADU projects across Downey with the same approach – we’re an independent service provider and not affiliated with Cambria.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Home Additions & ADU Is Failing
Quartz doesn’t fail like wood or metal. It fails at the seams, the cutouts, and the edges – the places where the installation, not the material, did the work.
- A crack radiating from the sink or cooktop cutout. The cabinet below flexed or the cutout corners weren’t relief-cut. Quartz has almost no give, so the crack follows the stress line straight out of the corner.
- A dark or widening line at a seam. The seam adhesive is separating, usually because the two panels were installed on a shimmed or uneven cabinet run. Our technicians find this often in garage conversions where the slab floor was leveled but the cabinet feet weren’t re-shimmed after.
- A chip at the front edge. Impact or thermal shock from a hot pan set down near the edge. Cambria is durable but not heat-proof – a 400°F pan can scorch the polymer binder and dull the finish permanently.
- Discoloration or a cloudy patch. Usually a chemical stain from a harsh cleaner or an adhesive failure under the surface. Quartz is non-porous, so a stain that won’t wipe off is often a sign the surface finish has been compromised.
- Visible sag or deflection. The slab is moving because the substrate under it is failing – often moisture coming up through a slab-on-grade conversion. Fixing the top without fixing the subfloor means it fails again.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what a Cambria-included addition or ADU project costs in Downey, with the surface work priced transparently inside the project:
| Scope | Installed Price Range (Downey) |
|---|---|
| Home Addition (full project, Cambria surfaces included) | $45,000 – $130,000 |
| ADU Construction (full project, Cambria surfaces included) | $90,000 – $220,000 |
| Garage Conversion (full project, Cambria surfaces included) | $30,000 – $80,000 |
| Cambria countertop replacement within an addition | $2,000 – $6,500 |
| Cambria vanity in a new ADU bath | $800 – $3,000 |
The range is driven by square footage, whether the addition is a full kitchen or a kitchenette, how much plumbing needs to move, and whether the surface is a 2 cm or 3 cm slab. We quote parts and labor line by line, so you see the slab cost, the fabrication, and the install separately. Every project carries the 730-Day Done Right Promise – if the work isn’t right, we make it right. With 0% financing for 18 months and $1,000 off projects over $10,000, the sticker price isn’t the whole story.

DIY or Call Us?
Setting a Cambria slab is not a DIY job. Quartz weighs 20 to 25 pounds per square foot, so a 3 cm kitchen island slab in an ADU can top 300 pounds before anyone touches it. The cutouts, the seam adhesive, and the substrate prep are all steps where a small measuring error becomes an expensive crack. And the material isn’t forgiving: there’s no sanding out a bad seam or a miscut hole.
What you can safely do is check. Measure the slab thickness at an exposed edge, look at the cabinet run under a sagging section, and note where the cracks start. Take a photo of any label on the original install paperwork. That’s the information we need to quote.
What you shouldn’t do is try to lift, cut, or re-seam a slab yourself. Call (888) 255-8179 and a live person answers, any hour, any day. We’ll schedule a free estimate and tell you straight whether you’re looking at a surface fix or a bigger addition issue.
FAQs

How long does a Cambria surface last in a Downey addition? A properly fabricated and installed Cambria surface typically lasts 15 to 25 years or more. Lifespan depends mostly on the substrate and the heat discipline around the cooktop, not the stone itself. Inland Southern California heat and sun exposure on a west-facing ADU kitchenette accelerates thermal stress on the finish, so we spec the backsplash and shading at the planning stage. Call (888) 255-8179 for an assessment.
Can my cracked Cambria be repaired instead of replaced? Possibly. Hairline cracks and small chips can sometimes be filled with a color-matched epoxy, especially on vanity tops. Cracks radiating from a cutout or a seam failure almost always need replacement, because the underlying stress is still there. A free estimate tells you which case you’re in.
How long does the swap take? A single Cambria vanity or laundry counter is usually a one-visit job in a finished addition. A full kitchen surface in a new ADU build takes 1 to 2 days for fabrication and install after template, scheduled around the rest of the construction sequence. We quote the timeline in writing before we start.
How do you source the Cambria for my project? We source the slab through a verified Cambria fabrication partner and match your series name and thickness to the project specs. If you already have a Cambria surface and want a higher-grade replacement in the same series, we quote both options side by side. Call (888) 255-8179 for a free estimate – the number you see is the number you pay.
Ready to price your addition or ADU? We also handle KraftMaid, Silestone, and Kohler in the same projects. Call (888) 255-8179 to schedule your free estimate with Groundwork Construction Co. of Downey. Calls are answered by a live person 24/7, our technicians have up to 12 years of experience, and every project is background-checked, uniformed, and backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












