







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Driveway & Pavers: The Downey Owner’s Guide
We install Schluter-compatible driveway and paver systems in Downey, and a full paver driveway typically runs $7,000 – $18,000 installed, with smaller repairs and re-sets far below that. Most Downey owners discover a failed Schluter detail the same way: water starts pooling against the garage slab after a winter rain, a paver edge lifts by a few millimeters, or a hairline crack opens along the drainage channel and spreads a little wider every month. It rarely announces itself. It shows up as a wet spot that wasn’t there last year, then a loose border stone, then a call to us. Groundwork Construction Co. of Downey is an independent service provider and is not affiliated with Schluter.

Key Takeaways
- Schluter driveway and paver failures in Downey are usually about water movement, not the tile or stone itself.
- Installed repairs and re-sets scale with square footage and drainage complexity, not with the brand name on the profile.
- Every job we complete carries the 730-Day Done Right Promise – if it’s not done right, we make it right.
- Upfront pricing, no surprises: the number you see is the number you pay.
Which Schluter Models This Applies To

Schluter’s exterior paver and driveway side runs through a handful of product families, and knowing which one you have is the whole game. The SCHIENE profile is the classic edge-protection and transition piece, and it comes in heights matched to your finish thickness in roughly 1/4-inch increments with a perforated anchoring leg. TREP-E and TREP-V are the stair-nosing profiles. RENO-TK and RENO-U handle transitions between different surface heights, and KERDI-DRAIN and KERDI-LINE appear where a driveway ties into a channel or trench drain. DILEX and DILEX-EZ are the movement-joint profiles, and on a Downey driveway they matter more than most owners realize because of our seasonal ground movement.
To identify the right part, skip the profile name and read the dimensions. Measure the finished paver or tile thickness with a caliper, then measure the profile’s visible reveal (the height of the metal or PVC edge above the surface). Those two numbers, not the color or the label, tell you which SKU you need. Where labels have weathered off, look at the anchoring leg: a perforated trapezoid pattern with oblong holes is the standard Schluter leg. The OEM-versus-aftermarket call is genuinely worth thinking through here. Schluter’s own profiles are engineered around specific leg depths and alloy or PVC formulations, and an aftermarket channel that’s 1/16 inch off will telegraph through the joint line within a season. For something exposed to Downey sun and rain, we lean toward genuine Schluter or a proven equivalent we’ve installed before, not whatever’s on the shelf.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Driveway & Pavers Is Failing
- Pooling water against the garage or foundation. The edge profile has lost its bond or the drainage slope has settled, so water stops moving and starts sitting. Standing water against a slab is the single most common cause of the next four symptoms on this list.
- A lifted or rocking border stone. The anchoring leg has separated from the base, usually from expansion pressure or a base that wasn’t compacted well enough. Once one paver rocks, the joint profile beside it takes the load it was never meant to carry.
- Hairline cracks along the drainage channel. Our summer heat cycling moves the slab and pavers at different rates, and a rigid joint with no movement allowance will crack. Downey driveways see this most where a channel meets the apron.
- White efflorescence or dark staining at the joints. Moisture is trapped behind or under the profile. It’s cosmetic until it isn’t – trapped moisture is what pushes the joint failure into the base.
- Visible movement-joint separations wider than a credit card. A DILEX joint that has pulled or compressed signals the whole assembly is working harder than it should. Left alone, the profile will tear out of the paver edge.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Downey, a small profile re-set or drainage-channel repair commonly lands inside our Driveway Sealing range of $250 – $700 once we’re already on site for sealing, while a partial paver edge rebuild tied to a failed profile typically falls within Driveway Replacement territory at $5,000 – $14,000 if a section of base has to come up. Full paver driveway installation at $7,000 – $18,000 is the other end, and it’s only needed when the base has failed under the profile, not when the profile alone has.
What drives the range: square footage, whether the base is sound, how far the drainage channel has to be re-sloped, and whether a genuine Schluter profile or a matching unit is specified. Our quotes are line-item and written. Parts and labor are separate lines, so you can see exactly what the profile costs and what the install costs. The work is covered by the 730-Day Done Right Promise – built to last, backed in writing. If you’re weighing other brands we also service for the same property – KraftMaid, Cambria, Silestone – those are separate conversations, but we’ll note the driveway numbers sit in the middle of what Downey homeowners spend on exterior work, well below a kitchen remodel.
DIY or Call Us?
Some checks are genuinely safe for an owner. You can walk the driveway with a level and spot where water should be draining but isn’t. You can photograph the profile reveal and measure it. You can lift a loose border paver by hand and look at the base underneath. That’s useful information, and we’ve had owners bring us exactly that.
Where DIY goes wrong is the base and the joint. A profile that looks like it just needs re-setting is often a base that’s settled or a drainage slope that was never right, and new mortar over a bad base fails within a season – sometimes within a month. On a sloped Downey driveway, a paver edge that comes loose under a loaded car can shift or kick. If you see movement at the edge or water pooling against the slab, stop and call. We’ll look at it, give you a written line-item quote, and you decide. Call (888) 255-8179 for a free estimate – a live person answers, 24/7.
FAQs

How long should a Schluter driveway profile last in Downey? A properly installed Schluter exterior profile on a sound base typically gives you 15 to 20 years, and the failure that ends its life is almost always the base moving beneath it, not the profile wearing out. Our inland heat cycling is harder on rigid joints than on the profile metal itself. Call (888) 255-8179 for an exact quote – estimates are free.
Can the profile be repaired instead of replaced? Often, yes – a re-set with a fresh bond coat and corrected drainage slope costs a fraction of a full rebuild, and we’ll tell you honestly whether that’s the right call. If the base underneath has failed or the drainage slope is wrong, a repair is a patch over a problem that will return. Our inspections are free, so you’re not spending anything to find out which case you’re in.
How long does the swap take? A single-profile re-set is usually a day. A partial edge rebuild with drainage correction runs two to four days, and a full driveway re-do is longer and quoted by scope. Most jobs are completed in a single visit where the base is sound. We schedule around your household use and keep you posted on the timeline.
How do you source the Schluter part? We match by measured reveal and finished thickness rather than by label, then source through authorized distribution so the profile is the genuine spec, not a lookalike. When an exact SKU is discontinued, we propose the current equivalent in writing before we install it. You’ll see the part on the quote, priced separately, so there are no hidden markups. Call (888) 255-8179 to start your free estimate.
If your Downey driveway is holding water, a Schluter profile is rock-loose, or a joint has opened wider than you’re comfortable with, get a written line-item quote before you do anything else. Groundwork Construction Co. of Downey brings background-checked, uniformed technicians, upfront pricing with no surprises, and the 730-Day Done Right Promise, plus 0% financing for 18 months and $1,000 off projects over $10,000. Call our team at (888) 255-8179 – a live person answers 24/7 – to schedule your free estimate and design consult. From foundation to finish line.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












