







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The Downey Owner’s Guide
Bathroom remodeling built around Tamko products in Downey typically runs $9,000 – $28,000 installed, and the timeline depends on scope, not on parts runs. We build these projects with Tamko shower systems, waterproofing membranes, and wet-area trim, and we put every number in writing before the first tile is pulled. If you’re replacing a failed shower pan, a cracked membrane, or a leaking surround, we can usually inspect and quote within a few days.

Most Downey owners find out something failed the same way: a soft spot in the shower floor, a grout line that keeps turning dark, or a ceiling stain in the room below. On a 1950s ranch near Furman Park, that stain often shows up in the garage ceiling before anyone notices the shower pan. By the time a membrane fails visibly, water has usually been moving for months.
Which Tamko Models This Applies To

Tamko is best known in Downey for roofing, but the bathroom side of the catalog covers shower pans and surrounds, waterproofing membranes, and wet-area trim and thresholds. If you have a Tamko shower pan or membrane in your home, the part you need is matched to the pan’s profile and drain configuration, not just the brand name.
Here’s the compatibility catch most homeowners miss: shower pan profiles change between product generations, and two pans with the same nominal footprint can have different drain setbacks and flange heights. If the flange height doesn’t match the wall board and backer, the pan will flex and the tile will crack. Pull the label off the old pan or measure the drain center to the nearest stud, and note the flange height. That’s the measurement that matters.
OEM parts are the safest match for a Tamko pan that’s still under warranty. For out-of-production profiles, a quality aftermarket pan or membrane system from a brand with a real warranty will last just as long and often fit better than trying to track down a discontinued OEM piece. We source both routes and tell you which one we’d use in your house.
Groundwork Construction Co. of Downey is an independent remodeling contractor, not affiliated with Tamko. We install and warranty the work, and we’re glad to specify other brands we carry, like KraftMaid, Cambria, and Silestone, if the plan calls for them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
- Soft or flexing shower floor. The pan has lost adhesion or the mud bed underneath has shifted. A door that suddenly rubs can be the first clue.
- Grout that stays dark after cleaning. Water is wicking under the tile through a compromised membrane, not just dirty grout lines.
- Caulk peeling at the pan-to-wall seam. The seam is moving because the pan flexes or the flange is too low for the tile plane.
- Staining on the ceiling below. Water follows the path of least resistance, and a leaking shower pan in Downey often shows up on a garage or hallway ceiling first.
- Musty smell that returns after cleaning. Moisture is trapped behind the surround or under the pan where you can’t see it.
If any of those are true in your bathroom, the pan and membrane are the place to start, not the tile on top.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Downey, a bathroom remodel with a Tamko shower pan and membrane replacement usually lands in the $9,000 – $28,000 range. A small bathroom remodel runs $5,000 – $12,000. A walk-in shower installation runs $4,500 – $12,000. A shower replacement runs $3,000 – $8,500. A tub-to-shower conversion runs $3,500 – $10,000. A bathroom vanity installation runs $800 – $3,000.
What moves the number: whether the drain and valve get moved, how much tile comes out, and whether the pan sits on a level mud bed or a slab with a hump. We quote parts and labor line by line, so you see what the pan, the membrane, and the trim cost separately. Upfront pricing, no surprises, and every installation is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That warranty is one of the longest workmanship guarantees in the residential construction space, and it applies to the water-tightness of the pan and membrane, not just the finish work.
DIY or Call Us?
What you can safely check yourself: the pan label for the model number, the drain setback with a tape measure, and whether the floor flexes when you step near the drain. Photograph the label and the drain area before you touch anything. That’s where it ends.
Pulling a shower pan or membrane is different. The pan is bonded to a mortar bed, the membrane has to be tied into the wall board at the correct height, and the drain has to be re-sealed so water goes out the pipe, not into the subfloor. Get the flange or the drain seal wrong and the leak is back in six months, with insurance asking who did the work. On a slab-on-grade home in Downey, a failed pan redo can mean cutting concrete. We do this for a living, with background-checked, uniformed technicians on every job, and our technicians have up to 12 years of experience. Call (888) 255-8179 and we’ll look at it.
FAQs

How long does a Tamko shower pan or membrane last in Downey? Twenty to thirty years on a proper mud bed with correct ventilation. In Downey’s inland heat and hard water, the grout and caulk fail first, and if those aren’t maintained, water gets in and shortens the pan’s life. A pan installed over a flexible or uneven bed often fails in half that. Call (888) 255-8179 for an inspection and exact quote – estimates are free.
Can the pan be repaired instead of replaced? Sometimes, if the leak is at a fitting or a cracked caulk seam and the pan itself is sound. Once the pan is soft or the membrane has failed, repair is a patch on a bigger problem. We’ll tell you which one you’re looking at before you spend money. Call (888) 255-8179 to schedule a free estimate.
How long does a shower pan and membrane swap take? Two to four days for a straightforward pan and membrane replacement with no drain or valve moves, and longer if the tile and backer come out with it. We give you the schedule in writing before we start, and the price doesn’t change once work starts. Call (888) 255-8179 to get your date.
How do you source the Tamko part? We pull the model number from your old pan or measure against the standard profiles, confirm compatibility with the drain and flange height, then order. We don’t stock parts and don’t carry them on a truck, so we order to your job. That keeps the part matched to your bathroom instead of close enough. Call (888) 255-8179 for a quote.
Ready to stop chasing leaks and get the bathroom right? Call (888) 255-8179 for a free estimate on your Tamko bathroom remodeling project in Downey. We’ll walk your bathroom, measure the pan, and hand you a written, line-item quote with no surprises. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available. A live person answers 24/7 – no voicemail, no waiting.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












