







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Downey Owner’s Guide
Fence installation on a Tamko material package in Downey typically runs $3,500 to $9,000 installed, and most jobs are completed in a single visit once the material is on site and the permit is clear. We’re an independent installer, not affiliated with Tamko, and we match the correct series and component to your existing fence so the repair or replacement holds. Owners usually find the problem the same way: a gate that drags, a post that rocks in the wind, pickets that cup and split after a wet winter, or a rail that has pulled loose from the post collar. Once one section starts moving, the load shifts and the next failure is already underway.

Which Tamko Models This Applies To

Tamko’s residential fence line breaks down by material family and profile series, not by a single part number stamped on the board. The label on the rail end or post cap tells you the profile, the nominal dimension, and the coating or finish. Measure the actual rail thickness and post face, not the nominal callout – a nominal 2×4 varies by mill and a shop that orders off the name alone can ship a rail that sits proud of the bracket. That measurement, plus the on-center post spacing, is what we match against before we quote.
OEM versus aftermarket is the real decision on a Tamko fence. Tamko-specific rail, post, and cap components give you an exact profile match and a consistent finish, and they’re the right call when the fence is newer or you’re replacing one damaged section next to sound material. A quality equivalent profile makes sense when the fence is older and you’re rebuilding a full run, since the finish color won’t match the original dye lot anyway. We tell Downey owners which path fits their fence instead of defaulting to the pricier one. From foundation to finish line, the goal is a repair that looks original and holds for years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Fence Installation Is Failing
- Posts that rock or lean after rain. The post footing has lost its grip or the base wasn’t set deep enough for the soil. Downey’s clay-heavy ground swells and shrinks with the wet-dry cycle, and that movement works a shallow post loose within a couple of seasons.
- Rails pulling out of the post collars. Fasteners backed out or the rail end split at the joint. Usually the rail was fastened through a knot or the wrong screw was used, and the connection loses its bite.
- Pickets cupping, splitting, or bowing. Moisture cycling on a face the finish didn’t fully seal. Inland Southern California sun bakes one side while the other stays shaded, and untreated exposed grain takes the worst of it.
- Gate that sags, drags, or won’t latch. Hinge screws stripped the post or the gate frame racked out of square. A gate carries far more load than a fence panel and fails first when the post or frame is underbuilt.
- Color fading or chalking on the sunny face. UV exposure breaking down the finish film. Tamko finishes hold well, but south- and west-facing runs in Downey take direct afternoon sun and lose gloss first.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed fence work in Downey runs $3,500 to $9,000 depending on the material family, linear footage, and how much of the existing structure is sound. What drives the range:
- Linear footage and height. A short side-yard run sits at the low end; a full perimeter at 6 feet runs toward the top.
- Post footings. Replacing posts means digging and setting new footings, which is the labor-heavy part of any fence.
- Gates. Each gate adds framing, hardware, and bracing to keep it square.
- Material series. The specific Tamko profile and finish you match against affects material cost.
- Removal and haul-off. Tearing out the old fence adds disposal.
You get a written line-item quote before work starts, and the number you see is the number you pay. Every fence we install is covered by the 730-Day Done Right Promise, and $1,000 off projects over $10,000 applies when a bigger job qualifies. Built to last, backed in writing.
DIY or Call Us?
A homeowner can safely check a few things: whether the finish is intact, whether pickets are loose, whether the gate latches, and whether posts move when you lean on them. Those checks tell you the scope. Where DIY goes wrong on a Tamko fence is the structural work – setting a post footing to the right depth in Downey’s expansive soil, matching the profile and finish to the existing run, and building a gate that stays square under load.
A post you set yourself that rocks in two seasons costs more to redo than the whole repair would have. If a post is loose, a rail has pulled free, or the gate won’t stay closed, that’s post-and-frame work, and it’s worth a professional look. The finish-matching and section-swap side is where we save Downey owners from a mismatched patch. Call Groundwork Construction Co. of Downey at (888) 255-8179 for a free estimate – live people answer, and most jobs are completed in a single visit.
FAQs

A properly installed Tamko fence typically holds 15 to 20 years in this climate, with posts and gates as the first fail points. Inland Southern California’s sun and the wet-dry soil cycle wear footings faster than most homeowners expect, so post condition matters more than finish condition over the long run. Call (888) 255-8179 for a free assessment.
Often yes – a single rail, post, or gate can be swapped if the surrounding structure is sound. We match the Tamko profile and finish so the repaired section blends with the rest, and we tell you honest when a full run makes more sense than patching. Call (888) 255-8179 for an exact quote – estimates are free.
Most fence jobs are completed in a single visit once material and permit are in hand; larger runs or heavy post replacement may need a second day. We set the schedule upfront so you know what to expect. Call (888) 255-8179 to book your free estimate.
We order the specific Tamko profile and finish to match your existing fence, measured on site – not off a catalog name. No parts sit on a truck waiting; we source each job to your fence’s actual dimensions. Call (888) 255-8179 and we’ll confirm what your fence needs.
From a single gate that won’t latch to a full perimeter that’s reached the end of its run, Groundwork Construction Co. of Downey handles the work from foundation to finish line with upfront pricing and a written line-item quote. Every project is covered by the 730-Day Done Right Promise, and we also service KraftMaid, Cambria, and Silestone across our other trade lines. Call (888) 255-8179 to schedule your free estimate – a live person answers 24/7.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












