







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Bathroom Remodeling: The Downey Owner’s Guide
Cambridge Pavers bathroom remodeling in Downey runs $9,000 – $28,000 installed, with most full bathroom remodels landing near $14,500 once the waterproofing, tile setting, and finish work are included. Small bathrooms with limited footprint typically finish in the $5,000 – $12,000 range. These are booked projects, not emergency calls – we schedule the work around your household. Groundwork Construction Co. of Downey works with Cambridge Pavers bathroom surfaces as hardscape and tile elements inside the wet zone, and we’re an independent installer, not affiliated with Cambridge Pavers.

Owners usually call us after a bathroom floor or shower surround starts telling them something’s wrong. Grout lines widen. A paver at the shower entrance rocks underfoot. Water pools toward the doorway instead of the drain. Cambridge Pavers’ manufactured stone pavers are dense and dimensionally stable, but they still sit on a substrate that has to shed water, and when that substrate fails, the pavers telegraph the problem long before the wall inside the room shows it.
Key Takeaways
- Installed bathroom remodel range in Downey: $9,000 – $28,000; small bath remodels: $5,000 – $12,000
- Cambridge Pavers stone is a heavy, non-porous paver system – it needs a substrate and slope designed for wet rooms, not a simple slab floated over
- Our technicians have up to 12 years of experience with paver, tile, and wet-zone assemblies in Southern California
- 730-Day Done Right Promise on the workmanship side of every remodel we install
- 0% financing for 18 months plus $1,000 off projects over $10,000
Which Cambridge Pavers Models This Applies To

Cambridge Pavers manufactures a handful of paver lines – Cambridge Cobble, Ledgestone, Olde English, and the Pavestone family – and their dimension formats matter to a bathroom install. Where a Downey homeowner runs into trouble is sizing. Cambridge’s standard driveway pavers are thicker (typically around 2-3/8 inches to 2-3/4 inches) than what a shower curb or bath floor wants. In a wet zone, that thickness has to be disclosed to whoever frames the transition saddle at the doorway, or you get a lip that trips people and catches water at the jamb.
To identify your pavers, look at the profile and texture rather than the color – Cambridge’s color blending varies by batch, but the face relief and edge geometry stay consistent within a series. Photograph the stretcher, the header, and the edge of the assembled section. Cambridge Pavers is a regional manufacturer, so their distributors sometimes substitute a close relative in a different series when the original is out of stock. That substitution looks fine on a delivery pallet and looks wrong under a bathroom light. Ask for the series name in writing on the invoice.
OEM vs. aftermarket for Cambridge Pavers is less about the stone itself – it’s inert and will not “fail” like a moving part – and more about how the pavers are set inside a wet room. That’s the part owners should interrogate, not the pavers. We match the setting materials and substrate to the paver’s thickness and absorption, not to a generic thinset spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Bathroom Remodeling Is Failing
- Paver shifts underfoot at the shower threshold. The mortar bed beneath has loosened after standing water found a low spot. Once a paver rocks, the waterproofing membrane underneath is already compromised.
- Grout cracking that returns after repair. Repeated cracking within a few weeks of a fresh grout job usually means movement below, not a grout problem. Weight-rated pavers amplified by a flexible substrate will open joints every time.
- Water pooling near the door or vanity instead of the drain. The slope was established before the substrate cured, or the substrate itself deflected. A Downey bathroom shares the slab with the house, and interior slab movement after a heavy Santa Ana wind season can throw that slope off by a tenth of an inch – enough to trap an inch of standing water.
- Efflorescence – white chalky film – creeping up the paver edges. Cambridge Pavers’ stone is dense, but the setting bed underneath wicks moisture. Efflorescence through the joints points at moisture movement from below, not condensation above.
- Mildew that returns in the same pattern after cleaning. Southern California interior bathrooms hover around 60-70% ambient humidity most of the year. A paver set on a vapor sandwich traps that moisture at the base of the wall, and the mold comes back because the source never dried.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed bathroom remodeling in Downey falls in a $9,000 – $28,000 range depending on footprint, how much of the plumbing moves, and whether the shower gets a full tile envelope or a Cambridge Pavers floor with tile walls. Small bathrooms with no plumbing relocation come in at $5,000 – $12,000. Walk-in shower installation runs $4,500 – $12,000; a tub-to-shower conversion runs $3,500 – $10,000; a straight shower replacement runs $3,000 – $8,500; a vanity swap runs $800 – $3,000.
What moves the number: waterproofing system (a bonded membrane is cheaper than a full mortar bed and lasts longer), the linear drain vs. center drain decision, and the number of fixture relocations. Our quotes are line-item, upfront pricing, no surprises. The 730-Day Done Right Promise covers workmanship – if a paver backs out or a joint opens because of how we set it, we make it right. Material warranties remain with the manufacturer.
DIY or Call Us?
An owner can safely check a few things without touching the assembly. Look at the slope by running a level across the floor and watching where water puddles after a shower. Photograph the joint pattern. Confirm the series name on the original invoice if you still have it. That information helps us quote accurately.
The part that goes wrong in DIY is the substrate and waterproofing – the layer you cannot see after install. Paver floors set over an unsealed substrate in a wet room will telegraph every failure into the room within months. Pulling up even one paver to “check underneath” typically breaks the waterproofing continuity, and the fix costs more than the original install. For anything below the pavers, call (888) 255-8179. Our estimate visit is free, and our call lines are answered by a live person 24/7.
FAQs

How long does a Cambridge Pavers bathroom floor last? A properly installed Cambridge Pavers bathroom floor with a bonded waterproof membrane typically holds its slope and joint integrity for 15-25 years or more. The pavers themselves won’t fail – the waterproofing layer and setting bed are what determine lifespan, and in Southern California’s dry climate that substrate outlasts the same assembly in a humid climate.
Can you repair the floor instead of a full replacement? Sometimes yes – a single loose paver can be reset if the membrane beneath is intact, and small grout failures can be corrected without pulling the assembly. Anything involving standing water, repeated grout cracks, or efflorescence points to the substrate, which means a localized repair won’t hold. We’ll tell you honestly on the estimate which side of that line you’re on. Call (888) 255-8179 to schedule it.
How long does a Cambridge Pavers bathroom remodel take? A small bathroom remodel (no plumbing relocation, Cambridge Pavers floor and tile shower surround) runs about 2-3 weeks once the materials are on site. A full bathroom remodel with a walk-in shower and vanity swap runs 3-5 weeks. We schedule the phases so you keep a functioning bathroom as long as possible.
Where do you source Cambridge Pavers material for a Downey project? Through Cambridge Pavers’ dealer and distributor network in the greater Los Angeles area. If a specific series or dimension is on backorder, we tell you upfront and give you the close-match options before we order, because substituting a paver that photographs well but reads differently at bathroom scale causes problems in a small wet room. We also work with KraftMaid, Cambria, and Silestone on the cabinetry, countertop, and vanity side of the same project.
If you’re in Downey and your bathroom has a failing paver floor or you’re planning a remodel, call (888) 255-8179 for a free estimate. We offer 0% financing for 18 months and $1,000 off projects over $10,000, our technicians are background-checked and arrive in uniform, and our 730-Day Done Right Promise backs the work in writing. From foundation to finish line – one contractor, one accountable team.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












