







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Bellflower, CA: What the Job Really Costs and How Long It Takes
Cabinets & countertops in Bellflower typically run $14,000 to $45,000 for a full replacement of the cabinet run and counter surface, and most of that span comes down to door style, box material, and whether you’re relocating the sink. The work itself runs about two to three weeks from demo to final caulk: three to four days for cabinet set, one day for template, five to seven days for fabrication, then the install. Call (888) 255-8179 and we’ll schedule a free on-site estimate.
What pushes people toward the high end here isn’t the material alone. It’s what’s behind the old cabinets.
How We Sequence a Cabinet and Countertop Job

The order matters, because the counter can’t be templated until the boxes are set and shimmed. Here’s how a typical Bellflower job runs.
Day 1: Tear-out and open-up
We pull the old doors, boxes, and counter in one day. That’s when we find what the last layer hid: water staining around the sink base, a soft subfloor sheet, or 1960s wiring feeding a disposal that was never on a proper circuit. You get photos the same afternoon and a straight conversation about what it adds. Most surprises are small. Some aren’t.
Days 2 – 3: Wall prep, blocking, and rough electrical
Walls get patched and squared, and we add blocking where the upper cabinets hang. If you’re moving the range or adding an outlet for a microwave, that rough work happens now, before the boxes go up. Electrical changes beyond a simple swap need a permit, and we pull it.
Days 3 – 5: Cabinet set and leveling
Base boxes first, then uppers, shimmed and scribed to the wall. Older Bellflower homes rarely have a plumb wall or a level floor, so shimming is a real part of the labor, not a footnote. This is your last easy moment to change hardware placement or add a pull-out.
Day 5 or 6: Template
For quartz or granite, a fabricator comes out with a laser template. Nothing can move after this. Sink cutout, faucet holes, and edge profile all get locked here, and that’s the decision you’ll want to have made by day 2, not day 5.
Days 6 – 12: Fabrication, then install and finish
Slab work takes five to seven days in the shop. Install is a half day, then the sink set, faucet, disposal, caulk lines, and a final punch walk. If a backsplash is in scope, add a day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Stock vs. semi-custom boxes. Stock comes in fixed widths and ships in days; semi-custom fills odd gaps and takes three to five weeks. In a 1950s Bellflower kitchen with a 47-inch wall, semi-custom is often the difference between a filler strip and a clean run.
- Plywood vs. particleboard box. Plywood costs 15 – 25% more and holds up better under a sink that leaks for a month before you notice. Particleboard is fine everywhere else.
- Quartz vs. granite. Quartz runs roughly $55 – $95 per square foot installed and never needs sealing. Granite is often $45 – $85 and is genuinely heat-tolerant, but it’s porous and wants sealing every year or two.
- Laminate. The cheapest real option, often $25 – $45 per square foot installed. Modern laminate looks far better than the 1990s version and suits a rental or a budget-first kitchen.
- KraftMaid semi-custom cabinetry is what we quote most for homeowners who want a real door-style catalog without jumping to full custom pricing.
- Butcher block and solid surface. Warm and repairable, but they need oiling and they scorch. Good for an island, less good around a range.
What Cabinets & Countertops Cost in Bellflower, CA

Plan on $14,000 to $45,000 for cabinets and countertops together, with cabinet installation alone at $4,000 to $13,000 and countertop installation at $2,000 to $6,500. Those are real line items, not a blended guess.
Five things move the number:
- Linear feet of cabinet. A 10-foot galley and a 25-foot L-shape are different jobs. Door count and drawer count scale the price fastest.
- Box grade. Stock to semi-custom is usually a $3,000 – $8,000 swing on a typical run.
- Counter material. Laminate to quartz on the same footprint can add $2,500 – $4,000.
- Moving plumbing or electrical. Relocating a sink or adding a circuit means rough-in work and a permit, often $1,500 – $4,500.
- Condition behind the wall. Soft subfloor, old galvanized supply lines, or unpermitted past work get found on day 1. We quote the fix before we touch it.
Our written estimate itemizes cabinets, counter, labor, disposal, and permit. It doesn’t include appliance purchase, and it doesn’t include structural changes discovered after demo until we’ve priced them with you. That’s the upfront pricing model: the number you see is the number you pay on the scope we wrote.
See the difference
Before
After
Before
After
Before
AfterWhat Bellflower Homes Specifically Do to This Job
Bellflower is built out. Almost every job here is remodel on post-war housing, not new construction, and the housing stock shapes the work directly. Most of what we open up sits in 1940s – 1960s single-story stucco tract homes on small lots, often with original galvanized plumbing behind the sink wall. That galvanized pipe is the single most common reason a “simple” cabinet swap turns into a plumbing day.
The dry, hot inland-LA summers and mild wet winters matter too. Sun-degraded finishes and occasional winter moisture mean we regularly find dry rot in the toe-kick and termite damage in a cabinet back panel that looked fine from the room side. We check before we set new boxes on it.
Permits are the other Bellflower-specific reality. Plan check here is thorough, especially on anything that touches structure or creates new square footage, and inspectors have seen a lot of unpermitted work. If a prior owner converted the detached garage or carved out a bedroom without a permit, a cabinet job that pulls a permit can surface it. We’d rather tell you on day 1 than have an inspector tell you on day 10.
We cover all of Bellflower, ZIP codes 90706 and 90707, from the older blocks near downtown to the streets off Alondra and Bellflower Boulevard. See our Bellflower service area page for the full picture, or our kitchen remodeling hub if the job is bigger than cabinets and countertops.
Serving Bellflower, CA – Our Local Coverage Area
We serve Bellflower and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Bellflower

Two to three weeks from demo to final walk, with about a week of that being countertop fabrication in the shop. Cabinet set takes three to four days. If you’re templating quartz or granite, nothing can move after the template day, so have your sink and faucet picked by then. Call (888) 255-8179 for a schedule based on your actual kitchen.
Straight replacement in the same footprint usually doesn’t require one, but any electrical, plumbing, or structural change does. Moving a sink, adding a circuit, or opening a wall means pulling a permit and passing inspection. We’ll tell you upfront which side of that line your job falls on, and we pull the permit when it’s needed.
Yes, and that’s the most common way we do it. Keeping the sink, range, and dishwasher in place avoids rough-in work and a permit, and it’s where the $14,000 end of the range lives. The catch is that your new cabinet layout has to respect the old plumbing locations, which usually means a slightly different box configuration than you’d design from scratch.
$14,000 to $45,000 for the combined job, with cabinets alone at $4,000 to $13,000 and countertops at $2,000 to $6,500. The low end is stock boxes and laminate in the same footprint; the high end is semi-custom cabinetry, quartz, and a relocated sink. Call (888) 255-8179 for an exact quote on your kitchen; the estimate is free.
Every cabinets and countertops project is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Our technicians have up to 12 years of experience, they’re background-checked, and they arrive in uniform. Product warranties from the cabinet and counter manufacturers pass through to you on top of ours.
Get a Free Estimate on Cabinets & Countertops in Bellflower
Call (888) 255-8179 and a live person answers, any hour. We’ll ask a few questions about your kitchen, then schedule a free on-site estimate where we measure the run, check behind the sink wall, and hand you a written line-item quote with the permit scope spelled out. If the job is part of a full Kitchen Remodeling in Bellflower, we’ll scope it that way. Homeowners often pair this work with a Walk-In Showers & Shower Remodeling in Bellflower or a Tub-to-Shower Conversion in Bellflower while the house is already torn up. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.












