







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Santa Fe Springs, CA: What to Expect
New cabinets and countertops in Santa Fe Springs typically run $14,000 – $45,000 and take about five to seven working days once materials are on site, with three to five weeks of production lead time before that. The number you land on depends on door style, box construction, and whether you’re set on quartz or granite. Call (888) 255-8179 for a free on-site measure and a written line-item quote, so you can see exactly what’s driving the price before you commit.
How We Sequence a Cabinet and Countertop Job in Santa Fe Springs

This is the part most homeowners want to understand before they sign anything. Here’s the real order of operations, not a vague promise that we handle everything.
Day 1: Protection, demo, and tear-out
We lay floor protection and plastic containment first, then pull the old cabinets, countertop, and sink. If you’re keeping your existing layout, we cap the plumbing and protect the circuits. Demo on a standard Santa Fe Springs ranch kitchen runs most of the day. This is also when the surprise shows up: 1950s-era homes along the older residential pockets often have original galvanized supply lines or a shutoff that won’t seat, so our crew checks water and power before any new boxes go in.
Day 2: Wall prep, leveling, and layout verification
Cabinet installation is level-and-plumb work before it’s anything else. Floors in older Santa Fe Springs tract homes are rarely dead flat, so we shim, scribe, and check the wall plane. This is the day the homeowner confirms hardware placement, filler strips, and any filler scribe against an out-of-square wall. Getting this right now saves a fight later.
Day 3: Cabinet boxes, uppers, and island set
Lower cabinets, uppers, and pantry go in, then the island gets set and anchored. If we’re running new under-cabinet wiring or a relocated disposal circuit, the electrical hookup happens here, which is one reason being clear about layout changes early matters. Boxes go up square, doors line up, and drawers run clean.
Day 4: Countertop template and fabrication
For stone and quartz, we template the installed cabinets, which takes a couple of hours, and send it to fabrication. Fabrication typically runs five to ten business days for quartz or granite. Laminate and butcher block can be cut and fit much faster. This is the gap in the schedule you should plan around, and it’s why we tell people not to schedule a kitchen-heavy holiday the same week.
Day 5: Countertop set, sink, and backsplash connection
Countertops get set, seams get matched, and the sink and faucet reconnect. If you’re tying in a new backsplash, that’s a short follow-on and we coordinate it so the counters aren’t crowded. Final walkthrough covers door alignment, drawer pull, caulk lines, and cleanup. Most full cabinet and countertop jobs land at five to seven working days of actual on-site work spread across a few weeks with fabrication in the middle.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Cabinet and Countertop Options You’ll Choose Between
Most Santa Fe Springs homeowners weigh three or four decisions. Here’s the honest trade-off on each.
- Stock vs. semi-custom vs. custom cabinets: Stock boxes are the fastest and least expensive, but they come in fixed sizes and force filler strips. Semi-custom gets you the height and width you want in a reasonable lead time. Custom is the most flexible and the slowest, and it’s usually overkill for a 1950s ranch kitchen.
- Cabinet box construction: Plywood boxes hold up to moisture and re-hanging better than particleboard, and they’re worth the upcharge in a kitchen that gets real use. Door style and finish matter just as much, and brands like KraftMaid give you a solid middle lane on both.
- Quartz vs. granite vs. laminate: Quartz is non-porous and consistent, needs no sealing, and handles a busy kitchen well. Granite is natural, unique per slab, and needs periodic sealing. Laminate is the budget play and has improved a lot, but it won’t take the heat and edge abuse that stone will. Cambria is a common quartz pick when color consistency is the priority.
- Sink and faucet fit: An undermount sink means the countertop edge is finished and the fabrication is more precise, which adds cost. A drop-in sink is cheaper to install and easier to replace later.
- Island configuration: An island changes the electrical, sometimes the plumbing, and always the traffic flow. If you’re adding one, decide early whether the range or sink lives there.
Cabinet and countertop work often pairs with the wider scope of a full Kitchen Remodeling in Santa Fe Springs when the layout itself is changing, and we’ll tell you plainly when a job has outgrown the cabinet-only envelope.
What Cabinets & Countertops Costs in Santa Fe Springs, CA

Cabinet installation in Santa Fe Springs runs $4,000 – $13,000, and countertop installation runs $2,000 – $6,500. A kitchen island adds $3,000 – $10,000. A backsplash adds $800 – $2,500. Put together, a full cabinet and countertop replacement in Santa Fe Springs usually lands between $14,000 and $45,000, and that’s the range we quote against.
Five things move the number:
- Layout changes: Moving a sink or range means relocating plumbing and gas, which pushes the job toward the high end fast.
- Cabinet tier and count of boxes: More boxes, more custom sizing, more money. A galley and a U-shaped kitchen are different budgets.
- Countertop material: Laminate at the bottom, quartz and granite in the middle, exotic stone at the top.
- Electrical upgrades: Older Santa Fe Springs homes frequently need an undersized panel addressed before we add circuits, and that’s a real line item.
- Permit scope: Cosmetic swap-outs are often exempt. Layout, electrical, plumbing, or structural changes require permits and inspection, and that adds cost and time.
A written estimate from us spells out cabinet boxes, countertops with slab and fabrication, install labor, disposal, and any electrical or plumbing work in the line-item form. It does not typically include the cost to fix surprises behind the wall (bad plumbing, water damage, non-code wiring) until we open the wall and see it. We flag that upfront rather than surprise you mid-job. No-hassle upfront pricing means the number you see is the number you pay, and the 730-Day Done Right Promise backs the workmanship.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Fe Springs Homes Specifically Do to This Job
Santa Fe Springs is an unusual place to install a kitchen. The 1940s-70s tract housing sits right next to refineries, warehouses, and truck yards off the 5 and 605, so a lot of our residential work happens in older homes tucked alongside industrial property. That housing stock means we’re regularly working around original galvanized plumbing, undersized electrical panels, and walls that have settled unevenly over decades. The houses were built modest and small-lotted, so storage and layout planning matter more than square footage.
Permitting follows the city’s review process and matches what the work actually touches. A straight cabinet and countertop swap with no plumbing, gas, or circuit changes is often a non-permit job. Move the sink or add an island with electrical, and you’re into permits and inspection. Seismic provisions under California code apply to anything structural. Summer heat here is real – inland Whittier Narrows heat pounds a house – and a kitchen that’s been closed up and unvented for years often shows moisture damage near the sink wall that you only find on demo day.
The dusty truck traffic near the 605/5 interchange doesn’t affect cabinets directly, but it does remind us to button installations tight against air infiltration. If your project grows past the cabinets, our Kitchen Remodeling service covers the rest of the scope, and we back everything with the same written guarantee whether you’re near the rail yards or on a quieter residential street in the Santa Fe Springs 90670 and 90671 ZIPs.
Serving Santa Fe Springs, CA – Our Local Coverage Area
We serve Santa Fe Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Santa Fe Springs

Plan on five to seven working days of on-site work, plus five to ten business days for quartz or granite fabrication in the middle. The full calendar time from order to final walkthrough is usually three to five weeks. Laminate and butcher block countertops shorten the fabrication wait. Call (888) 255-8179 and we’ll build a schedule around your move-in date or event.
Usually not, if you’re replacing cabinets and counters in the same footprint with no plumbing, gas, or electrical changes. Permits become necessary when you relocate a sink, move the range, add an island with new circuits, or touch anything structural. We confirm the permit scope during the free estimate so there are no surprises later. Call (888) 255-8179 to schedule that visit.
Yes, and this is the most common way we do it. Keeping the sink and range in place means no new permit, faster turnaround, and a lower total. You still get new boxes, doors, counters, and hardware; you just skip the plumbing and electrical rework. If you’re weighing a layout change, we’ll price both sides so you can see the difference. Call (888) 255-8179 to talk through your options.
Cabinet installation runs $4,000 – $13,000, countertop installation $2,000 – $6,500, island installation $3,000 – $10,000, and backsplash $800 – $2,500, so the combined range lands at $14,000 – $45,000. Layout changes, cabinet tier, countertop material, electrical upgrades, and permit scope are what push a job toward the top or bottom of that window. Call (888) 255-8179 for an exact quote; estimates are free.
Every cabinet and countertop job we do is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years from completion. That’s one of the longest workmanship guarantees in residential construction, and it covers installation, alignment, seams, and the fit of what we set. Call (888) 255-8179 with any warranty question and a live person will answer, day or night.
Get a Free Cabinets & Countertops Estimate in Santa Fe Springs
Call (888) 255-8179 to book a free on-site estimate for cabinets and countertops in Santa Fe Springs. On the call, we’ll ask what you’re replacing, whether the layout is changing, and what material you’re leaning toward, then set a time for a measure and a written line-item quote. You’ll get a real number, not a range to be renegotiated later. A live person answers around the clock.
Written by the team at Groundwork Construction Co.












