







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Santa Fe Springs, CA: What to Expect
A walk-in shower remodel in Santa Fe Springs typically runs $9,000 – $28,000 for a full project, or $4,500 – $12,000 when you’re converting an existing shower stall without moving the drain. Most jobs take two to three weeks of working days once we start, and the ones that run long are almost always older ranch homes where we open the wall and find 1950s galvanized plumbing. Call (888) 255-8179 to schedule a free on-site estimate.
How the Work Actually Goes, Stage by Stage

Walk-in showers & shower remodeling projects follow a predictable rhythm, and knowing it upfront helps you plan around the one or two days you’ll want to be home for decisions.
Day 1: Tear-out and inspection
We protect the path, shut the water at the fixture stops, and pull out the old pan, tile, and backer board. This is when we find what’s underneath: rotted subfloor near the drain, failed caulk lines, or a surprise moisture issue. You get a call the same day with photos and a straight answer on any added scope before we move forward.
Days 2 – 3: Plumbing and rough-in
If the drain stays in place, this stage is quick. If we’re relocating the drain, adding a bench, or moving the valve to a different wall, the rough plumbing and blocking go in here. A rough inspection, where required, happens before anything closes up. You’ll have already picked your valve brand – we commonly work with Moen, Kohler, and Delta – so there’s no hold-up.
Days 3 – 6: Waterproofing
This is the stage that decides whether the shower lasts twenty years or fails in three. We install cement backer board, then a bonded waterproofing membrane such as Schluter Kerdi over the walls and pan, with preformed corners and banding at every seam. Pan slope gets checked before tile. You don’t have to decide anything here, but it’s worth walking in and seeing it – a good installer is proud to show this work.
Days 6 – 12: Tile and grout
This is the longest stretch and the one where your material choices drive the calendar. Large-format porcelain goes up fast; small mosaic or a complex niche layout takes longer and costs more in labor. You’ll pick the layout pattern, niche placement, and grout color before this stage begins. We set glass or a partial glass panel after grout cures.
Days 12 – 15: Fixtures, glass, and final walkthrough
Shower head, valve trim, grab bars if you want them, and the glass enclosure go in. Then we test, clean, and walk the job with you. Anything on the punch list gets handled before we consider the job closed – and it’s all covered under the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the cost swing in walk-in showers & shower remodeling comes down to five decisions. Here’s the honest trade-off on each.
- Base: tile-and-membrane vs. prefab pan. A custom tiled pan with a membrane ($1,200 – $2,500) looks built-in and lasts, but requires a skilled installer and a longer cure. A prefab acrylic or solid-surface base ($400 – $900) installs in hours and cleans easily, though it limits size options and shows scratches over time.
- Wall tile grade. Glazed porcelain ($4 – $9/sq ft) is durable and forgiving. Natural stone like travertine or marble ($12 – $30/sq ft) needs sealing every year or two, especially with Santa Fe Springs water, which runs hard. Large-format slabs ($15 – $35/sq ft) cut grout lines but cost more in cutting and setting.
- Glass configuration. Frameless glass ($1,800 – $4,000) opens the room visually. Semi-frameless ($900 – $1,800) costs less and is easier to maintain. A fixed panel with an open doorway is the most budget-friendly and works well in a compact shower.
- Linear vs. center drain. A linear drain ($600 – $1,400 installed) lets you use one large tile slope instead of four cuts to a center drain. Center drains stay cheaper and simpler.
- Bench, niche, and grab bars. A built-in bench ($800 – $2,000) suits aging-in-place plans. Niches ($250 – $500 each) are worth it. Grab bars installed during rough-in are far stronger than retrofit bars.
What Walk-In Showers & Shower Remodeling Costs in Santa Fe Springs, CA

The full range for walk-in showers & shower remodeling in Santa Fe Springs runs $9,000 – $28,000, with the bulk of jobs landing between $12,000 and $18,000 for a standard 4×6 footprint with tile, glass, and a new valve. A tighter scope – shower replacement only, same drain, same layout – runs $3,000 – $8,500.
What pushes a job toward the high end:
- Size and layout. Moving from a 36-inch stall to a 60-inch curbless walk-in adds framing, tile, and glass area.
- Existing condition. Rotted subfloor, a failing pan, or galvanized supply lines found at demo add $800 – $2,500.
- Relocating the drain or valve. Moving plumbing in a slab-on-grade home costs more than in a raised-floor ranch – typically $1,000 – $3,000.
- Material grade. Porcelain versus marble versus slab tile can swing the tile line by $3,000 or more.
- Permit scope. Plumbing and electrical changes require a permit and inspection; cosmetic tile replacement usually doesn’t.
A written estimate from us lists line items for demo, rough-in, waterproofing, tile, glass, and fixtures, plus permit fees where they apply. It doesn’t include structural repair found behind the wall or HOA fees. Upfront pricing means the number you see is the number you pay unless you approve a change in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Fe Springs Homes Do to This Job
Most of Santa Fe Springs’ housing stock went up between the late 1940s and the 1970s – modest single-story ranches on small lots, many of them sitting right next to refineries, warehouses, and truck yards off the 5 and 605. That build era means we regularly open a shower wall and find galvanized supply lines, an undersized electrical panel feeding a bathroom that’s gained a hair dryer and a heated towel bar over the years, and subfloor that’s been quietly taking on moisture for a decade. The original bathroom tile in these homes is often set in a thick mortar bed, which is durable but heavy and slow to demo. If your home is near the rail yards, the dust and truck traffic also mean exterior-adjacent bathrooms accumulate grit that works into caulk lines and grout faster than in a quieter neighborhood. Permits here go through the City’s building department, and inspection timing matters when we’re relocating a drain or valve. While we’re in the walls, many homeowners pair this with a full Bathroom Remodeling in Santa Fe Springs that covers the vanity and flooring at the same time, and some take the opportunity to address the exterior with Roof Replacement & Installation in Santa Fe Springs if the summer sun has done a number on the shingles.
Serving Santa Fe Springs, CA – Our Local Coverage Area
We serve Santa Fe Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Santa Fe Springs

Plan on two to three weeks of working days for a full walk-in shower remodel. Permit review at the City can add one to three weeks before work starts if plumbing or electrical is changing. Call (888) 255-8179 for a timeline specific to your bathroom.
You need a permit if the drain or supply lines are moving, if the electrical changes, or if you’re altering the wall framing; cosmetic tile and fixture replacement usually don’t require one. We pull the permit and handle the inspection for you. Call (888) 255-8179 to talk through your specific scope.
Yes. Keeping the drain and valve in place is the most common path and often lands in the $4,500 – $9,000 range. We still replace the waterproofing, tile, valve trim, and glass, so you get a new shower without the cost of rough plumbing.
Most projects run $9,000 – $28,000, with a shower-only replacement at $3,000 – $8,500 and a full walk-in conversion at $4,500 – $12,000. Final cost depends on size, existing condition, and material grade. Call (888) 255-8179 for an exact quote – estimates are free.
Every walk-in shower we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship for two full years, far beyond the standard one-year contractor warranty. Call (888) 255-8179 with any warranty question.
Schedule a Free Estimate for Walk-In Showers & Shower Remodeling in Santa Fe Springs
Call (888) 255-8179 and a live person will pick up, any hour, any day. We’ll book a free on-site estimate at a time that works for you. On the visit, we measure the space, take a look behind the existing tile where we can, and hand you a written line-item quote – no pressure, no surprises. Our technicians bring up to 12 years of experience, and we’re covered by the 730-Day Done Right Promise. Santa Fe Springs homeowners can also pair this with a wider Bathroom Remodeling scope or exterior work such as Metal Roofing in Santa Fe Springs if the sun and wind have been hard on the roof.
Written by the team at Groundwork Construction Co.












