







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Santa Fe Springs, CA: What It Costs and How Long It Takes
Driveway repair and replacement in Santa Fe Springs typically runs $5,000 – $14,000 for a full replacement, or a few hundred to roughly $1,800 for targeted repairs like cracked slabs, settled sections, or failed joints. Most residential jobs wrap in 2 – 5 working days once we start, with concrete needing a few extra days of cure time before you park on it. Call (888) 255-8179 for a free on-site estimate and a written, line-item quote.
How a Driveway Repair & Replacement Job Actually Runs

No two driveways here fail the same way, but the sequence is steady. Here’s what happens from the first walk-through to the day you pull your car back in.
- Stage 1: Assessment and layout (day 1, about 90 minutes). We walk the slab, check for root heave, settled panels, and drainage that sends water toward the house instead of the street. You decide whether we patch, replace sections, or pour fresh. This is also where we flag any utility markings or widening that needs the city involved.
- Stage 2: Saw-cut, demo, and haul-off (day 1 – 2). We saw-cut clean lines, break out failed concrete or pull old pavers, and haul debris off-site. For a standard two-car driveway, demo and disposal take a day, sometimes a day and a half if there’s a deep base to remove.
- Stage 3: Base prep and grading (day 2 – 3). This is the step that decides whether the new surface lasts. We excavate to depth, compact a crushed aggregate base, and grade so water sheds away from the garage. In Santa Fe Springs, where the older slabs often sit over settled fill, we sometimes add a few extra inches of base to stabilize it.
- Stage 4: Pour or set (day 3 – 4). Concrete goes down in controlled sections with control joints cut in the right places; pavers get set on a screeded sand bed with edge restraint. You pick the finish here: broom, exposed aggregate, or a paver pattern.
- Stage 5: Cure and final walk (day 4 – 7+). Concrete cures for several days before vehicle traffic; pavers are drivable almost immediately. We do a final inspection with you and hand over the written warranty.
What you decide, and when: the repair-vs-replace call at stage 1, the finish at stage 4, and whether to widen or add a turnaround, which we price before demo so there are no surprises later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The material and finish pick is where homeowners spend the most mental energy, so here’s the honest trade-off on each.
- Poured concrete – the workhorse. The most affordable full replacement, holds up well to Santa Fe Springs sun when properly jointed, and needs resealing every few years. Best for budget-focused replacements and matching an existing slab.
- Paver systems (Techo-Bloc, Cambridge Pavers) – higher upfront cost, but individual units can be lifted and reset if one settles, and the look holds. Good for driveways that see heavy use or where you want a designed look.
- Exposed aggregate or broom finish – broom is slip-resistant and cheap; exposed aggregate hides tire marks better and adds texture. Neither changes the base cost much.
- Base and reinforcement grade – rebar vs. mesh, and base depth, are the quiet cost drivers. Skipping reinforcement saves a little now and costs more at the first crack.
- Drainage and slope work – a channel drain or re-grading can add to the total, but it’s what keeps water out of the garage during a hard summer storm.
What Driveway Repair & Replacement Costs in Santa Fe Springs, CA

Plan on $5,000 – $14,000 for a full driveway replacement in Santa Fe Springs. Smaller repairs land well under that. Here’s how the line items break down:
| Line item | Typical range |
|---|---|
| Full driveway replacement | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Paver driveway installation | $7,000 – $18,000 |
| Asphalt paving | $3,500 – $9,000 |
| Sealing (maintenance) | $250 – $700 |
What pushes a job to the high end: square footage and width, how much failed base has to come out, adding reinforcement or deeper base, upgrading to pavers, and any widening or drainage work that needs city sign-off. What’s included in our written estimate: demo, haul-off, base prep, material, labor, and cleanup. What usually isn’t: permit fees if the city requires one, utility relocation, and any landscaping repair around the edges. The number you see is the number you pay, and the whole job is backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Fe Springs Homes Specifically Do to This Job
Santa Fe Springs sits in the Whittier Narrows, and that geography shapes driveways here in ways it doesn’t elsewhere. The 605/5 interchange and the rail yards kick up dust and truck traffic that grind down exterior surfaces near the freeway, so driveways along streets close to those corridors show sun and abrasion damage sooner. Most of the housing stock went up between the late 1940s and the 1970s, which means a lot of these driveways are original slabs now past their service life, poured over fill that has since settled. Hot inland summers bake the surface, and strong Santa Ana winds in fall push grit and debris across it. Because we’re working next to refineries, warehouses, and truck yards, we also plan around delivery access and dust control during demo. Homeowners across the 90670 ZIP often pair a driveway replacement with exterior work, and we handle the wider scope through our Driveway & Pavers in Santa Fe Springs page when the project grows.
Serving Santa Fe Springs, CA – Our Local Coverage Area
We serve Santa Fe Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Driveway Repair & Replacement in Santa Fe Springs

Most residential driveway replacements take 2 – 5 working days, plus several days of concrete cure before you drive on it. Pavers are drivable almost immediately after setting. Call (888) 255-8179 for a timeline based on your specific driveway.
Many straight like-for-like replacements don’t require a permit, but widening, changing the apron at the street, or altering drainage often does. We check with the city before we start and pull what’s needed. Call (888) 255-8179 and we’ll tell you what your job requires.
Usually yes. We work around existing landscaping where we can and coordinate utility marking before demo so nothing gets hit. Call (888) 255-8179 for a free on-site look at what’s involved.
Targeted repairs are typically a fraction of a full replacement, which runs $5,000 – $14,000. If the base is sound, patching or resurfacing is often the right call; if it’s settled or cracked through, replacement saves money long-term. Call (888) 255-8179 for an exact quote.
Every driveway job is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we make it right. Call (888) 255-8179 to schedule your free estimate, and ask about our 0% financing for 18 months and $1,000 off projects over $10,000.
Get a Free Driveway Repair & Replacement Estimate in Santa Fe Springs
Whether your slab is cracked, settled, or simply worn out, a free on-site estimate tells you what’s actually needed and what it costs. We’ll walk the driveway with you, sketch the options, and hand you a written, line-item quote with no surprises. Homeowners often pair this with a Junior ADU & Interior Conversion in Santa Fe Springs or ADU Site Prep & Utilities in Santa Fe Springs when they’re reworking access. Explore our full Driveway & Pavers service or see everything we do in Santa Fe Springs. Calls are answered by a live person, 24/7 – call (888) 255-8179 today.
Written by the team at Groundwork Construction Co.












