







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Pico Rivera, CA: What It Costs and How Long It Takes
Driveway repair & replacement in Pico Rivera typically runs $5,000 – $14,000 for a full tear-out and pour, and most driveways take 4 to 7 working days from demolition to the day you can park on them again. Patch-and-overlay repairs on a sound slab land far lower, often a fraction of that number. The range depends on square footage, how much of the old slab can stay, and what you pour back. Call (888) 255-8179 and we’ll give you a line-item number, not a ballpark.
How a Driveway Repair & Replacement Actually Runs, Day by Day

Most homeowners picture a truck, a pour, and a guy smoothing concrete with a board. That’s the middle of the job, not the job. Here’s the sequence we run, and where you make decisions.
Stage 1: On-site measure and subgrade check (about an hour). On day one we walk the driveway with you, mark the slope, and probe what’s under the slab. A 1950s Pico Rivera driveway often sits on fill or old compacted soil that has settled unevenly, and that matters more than the top coat. You’ll decide here whether we repair sections or replace the whole run, and we’ll tell you plainly which one your slab supports.
Stage 2: Demolition and haul-off (1 to 2 days). We break out the old slab, load it, and haul it away. This is the loud stage, so plan around it. If your driveway shares a curb cut with a neighbor or sits close to a block wall, we flag that before the first swing. You decide nothing here; you just keep cars off the street apron.
Stage 3: Subgrade prep and formwork (1 day). We grade, compact, and set forms to the slope that drains water away from the house and toward the street, not into the garage. This is where a lot of cheap driveway jobs fail – they skip compaction and the slab cracks in two winters. You’ll confirm the finish layout here, including any joints or border pattern.
Stage 4: Pour and finish (1 day). Concrete or pavers go in. For concrete, we place, screed, and finish to the texture you picked. For pavers, the base and sand bedding get compacted hard before a single paver lands.
Stage 5: Cure and inspection (3 to 5 days before you drive on it). Concrete needs to cure, and we tell you exactly when to keep weight off it. If the job touches the public right-of-way, the city inspection happens before we call it done. That’s the whole arc – roughly 4 to 7 working days of active work plus cure time, and we tell you the finish date in writing before we start.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the real decisions happen before demo. Here’s what actually changes the look, the cost, and the lifespan of a driveway in Pico Rivera.
- Concrete, standard broom finish: The workhorse. Pour-in-place concrete, typically the lowest cost per square foot and the easiest to match to existing walks. It cracks over time and shows oil stains, so it suits homeowners who want simple and budget-conscious.
- Stamped or colored concrete: Same slab with a pattern pressed in and color added. Looks sharp for the first several years and costs more than plain concrete, but the finish can fade and it can be slippery when wet. Quikrete mixes and hardeners are common here.
- Interlocking pavers: Set on a compacted base with sand joints. Pavers flex with the ground instead of cracking, and if one breaks you lift and replace it. Techo-Bloc and Cambridge Pavers are the lines we most often lay down. Higher upfront cost, longer life, more forgiving in a settling-soil neighborhood.
- Asphalt: Lower cost and smooth to drive on, but it needs sealing every few years and softens in harsh summer heat, so it’s a lower-lifespan choice for a hot-inland climate.
- Repair vs. replace: A sound slab with a few cracks or a settled corner can often be patched, ground, or mudjacked rather than torn out. We’ll tell you when repair is the smarter money and when you’re just delaying a full replacement.
What Driveway Repair & Replacement Costs in Pico Rivera, CA

A full driveway replacement in Pico Rivera runs $5,000 – $14,000. Here’s how the job breaks down and what pushes a number one way or the other.
| Scope | Typical range in Pico Rivera |
|---|---|
| Full driveway replacement (tear-out and pour) | $5,000 – $14,000 |
| Concrete driveway installation (new pour) | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Paver driveway installation | $7,000 – $18,000 |
| Driveway sealing (maintenance, not replacement) | $250 – $700 |
Four things move the number. Size and layout: a long narrow run costs more to prep proportionally than a wide short apron. Existing condition: a slab that’s cracked through the subgrade means demolition plus soil correction; a cracked slab on solid ground is cheaper. Material grade: plain concrete sits at the low end, pavers and stamped finishes climb toward the top. Drainage and right-of-way work: if the apron meets the public sidewalk or curb, that portion has its own rules and can add cost. A written estimate lists demo, haul-off, base, material, finish, and inspection. It typically does not include drainage correction we find under the slab or a new retaining wall – and honest bids say so up front. Upfront pricing means the number we give is the number you pay. Call (888) 255-8179 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Pico Rivera Homes Specifically Do to This Job
Pico Rivera is a built-out, post-war suburb: most single-family homes here went up in the 1950s and ’60s as small three-bedroom stucco tract houses on gridded streets, and the driveways date to the same years. That changes what we find when the slab comes up. Those decades-old driveways have settled, cracked, and often soaked up more winter rain than thought – and hot inland summers plus dry Santa Ana winds dry the soil out and pull it away from the edges. In the 90660, 90661, and 90662 ZIP codes, we regularly see cracked and settled aprons on those 60-year-old slabs, which means compaction and grade work matter as much as the finish. Because these are owner-occupied homes families keep for decades, most of our work here is replace-and-stay, not flip. If your driveway ties into the public sidewalk or curb cut, expect city inspection on the portion that touches the right-of-way. And when the driveway project is part of a bigger run – a detached-garage conversion or an ADU in the backyard – the driveway work often comes down to the site access. We cover Pico Rivera and the surrounding streets; see our Pico Rivera service area page for the neighborhoods we work. Homeowners often pair this with ADU Site Prep & Utilities in Pico Rivera when a backyard build means moving the driveway and utility runs at once, and we handle the wider scope through Driveway & Pavers in Pico Rivera when the job grows past a single slab.
Serving Pico Rivera, CA – Our Local Coverage Area
We serve Pico Rivera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Driveway Repair & Replacement in Pico Rivera

A full driveway replacement in Pico Rivera takes 4 to 7 working days of active work, plus cure time before you park on concrete. Demo runs 1 to 2 days, prep and forms take a day, the pour is a single day, and then you wait 3 to 5 days of cure depending on the mix and the weather. Call (888) 255-8179 and we’ll give you a finish date in writing.
You need a permit when the work touches the public right-of-way – the sidewalk, curb cut, or apron at the street – and often nothing more for a private driveway behind the property line. That right-of-way portion gets an inspection before it’s signed off. We tell you which permit applies before we pull it, so there’s no surprise. Call (888) 255-8179 to schedule a free estimate and we’ll walk you through the permit scope on your specific driveway.
A full driveway repair & replacement in Pico Rivera runs $5,000 – $14,000, with concrete installation at $4,500 – $12,000, asphalt at $3,500 – $9,000, and paver driveways at $7,000 – $18,000. Small repairs are far less than a full replacement. Call (888) 255-8179 for an exact quote; estimates are free and itemized.
Not on a fixed-price driveway job – the number we write is the number you pay. The only exception is something genuinely hidden under the slab, like a broken utility line or a failed subgrade the probe didn’t find, and even then we stop, show you, and get approval before adding a dollar. We don’t do surprise change orders. Call (888) 255-8179 to get your written, fixed-price estimate.
Every driveway repair & replacement we do is backed by the 730-Day Done Right Promise – if the workmanship isn’t right, we come back and make it right. Our technicians arrive uniformed and background-checked, and the number you see is the number you pay. We stand behind the slab long after the concrete cures.
Get a Free Driveway Repair & Replacement Estimate in Pico Rivera
Call Groundwork Construction Co. at (888) 255-8179 for a free on-site estimate on driveway repair & replacement in Pico Rivera. A live person answers around the clock, and we schedule a visit that fits your week. On the visit we measure the run, probe the subgrade, and hand you a written, line-item price with a finish date and the 730-Day Done Right Promise attached. No pressure, no vague bids – just a number you can plan around. Estimates are free.
Written by the team at Groundwork Construction Co.












