







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Artesia, CA: What’s Involved and What It Costs
Door installation in Artesia, CA, typically runs $600 – $3,500 per door installed, with most single exterior or interior door replacements landing between $900 and $1,800 fully installed, and runs 4 to 8 hours per door when the frame is sound. If rot, an out-of-square opening, or unpermitted framing from an old addition turns up after demolition, expect a longer schedule and a higher number. Call (888) 255-8179 and we’ll give you a real range for your door before anyone touches a jamb.
How Door Installation Works, Stage by Stage

Door installation is one of those jobs that looks simple until someone yanks a rotted frame out of a 1960s wall. Here’s how we actually run it, so you know what happens on day one versus day three.
Stage 1: Walkthrough and measurement (30 – 60 minutes)
We measure the rough opening, check the wall for plumb and square, and confirm swing direction, handing, and hardware. You decide the door style, material, finish, and whether you’re keeping the existing trim or replacing it. This is also where we flag anything that looks like a prior conversion, since Artesia’s older tracts are full of patched openings.
Stage 2: Demolition and prep (1 – 2 hours per door)
The old slab or pre-hung unit comes out, along with damaged casing. We inspect the sill and framing for rot, water intrusion, and termite damage. On a project door this is where hidden problems surface. If the framing needs sistering or a sill needs replacing, we show you before we go further.
Stage 3: Framing and dry-fit (1 – 3 hours)
We shim and set the unit, verify the reveal is even on all sides, and check that the door closes without rubbing. You’ll see it dry-fit before we fasten anything permanently. This is your one clean chance to change your mind on swing or hardware.
Stage 4: Fastening, insulation, and sealing (1 – 2 hours)
Expanding foam in the gaps, flashing tape at the exterior head and jambs, then trim and casing. This is the stage that decides whether the door leaks in a hard rain or stays dry for twenty years.
Stage 5: Hardware, finish, and final walk (1 – 2 hours)
Hinges, lockset, strike plate, weatherstripping, threshold, and touch-up. We walk the door with you: does it latch smoothly, is the swing true, does the gap look right. Then we clean up and you sign off.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Actually Choose Between
Most of the decision-making happens before installation day, not during it. Here’s what matters and the honest trade-off of each.
- Steel entry doors – the workhorse for exterior doors in Artesia. Strong, secure, and holds up well against salt air, but dents show and edges can rust if the finish fails. Roughly $400 – $1,200 for the unit.
- Fiberglass entry doors – resist dents, rot, and moisture better than steel, and won’t rust near the coast. Cost sits higher, around $600 – $2,000, and some wood-grain finishes fade in direct sun over a decade.
- Solid wood doors – beautiful and repairable, but in Artesia’s dry summer and wet winter cycle, wood moves. Expect to refinish every 3 – 5 years. Best for interior doors or covered entries.
- Hollow-core interior doors – the default for bedrooms, closets, and bathrooms. Light and cheap ($150 – $400), but they dent and don’t deaden sound well.
- Pre-hung versus slab – a pre-hung unit comes with the frame already attached and installs faster, while a slab only replaces the door and reuses the existing frame. Slab is cheaper unless the frame is warped, which on older Artesia homes it often is.
- Hardware and finish – locksets, hinges, and handlesets range from $40 builder-grade to $400+ for a quality entry set. Coastal homes benefit from stainless or coated hardware that resists corrosion.
What Door Installation Costs in Artesia, CA

Door installation in Artesia typically runs $600 – $3,500 per door installed, and most homeowners end up near $900 – $1,800 for a single replacement with standard hardware. A few variables push a job toward the low or high end.
- Door type and material – a hollow-core interior door sits at the low end; a fiberglass or steel entry door with premium hardware lands high.
- Existing frame condition – sound frames keep costs down. Rot, termite damage, or an out-of-square opening adds framing and prep time.
- Relocating the opening – moving a door requires framing changes and often a permit, which can add $500 – $1,500 or more.
- Hardware grade – builder-grade handleset versus a keyed entry set with deadbolt makes a real difference.
- Exterior finish – a new exterior door on a home in Artesia needs paint or stain, flashing, and sometimes a new threshold, which we include when we quote.
A written estimate from us lists the door unit, labor, hardware, and finish separately. What it doesn’t cover unless we call it out: lead-safe handling on pre-1978 homes, and unpermitted work we discover during demo.
See the difference
Before
After
Before
After
Before
AfterWhat Artesia Homes Specifically Do to This Job
Most of the door work we do in Artesia happens on 1950s and 1960s single-story tract homes on tight parcels. That housing stock matters for door installation because the rough openings were cut for the doors of that era, not the doors people want now. Frames are often out of square after sixty years of settling, and windows and doors that were replaced in the 1980s or 1990s frequently sit off-plumb. We also see a lot of enclosed patios and converted garages built without permits, which means a door we’re installing today might open into a room that was never legally part of the house. Our walkthrough catches that before we order anything. On pre-1978 homes, lead-safe handling is part of the scope, and we plan around it. If your project grows beyond doors, the same crew can handle the wider scope through Windows & Doors in Artesia, and we cover the full city through our Artesia service area page.
Serving Artesia, CA – Our Local Coverage Area
We serve Artesia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Installation in Artesia

A single door installation takes 4 to 8 hours, and most jobs finish in one visit. Interior doors are faster, usually 3 to 5 hours. Exterior entry doors take longer because of flashing, sealing, and finish work. If the opening needs reframing, plan on a second day.
A straight door replacement in an existing opening typically does not require a permit; moving or widening an opening usually does. Artesia’s plan-check reviews are known for being thorough, so we confirm the requirement before we start. We pull the permit when one’s needed and handle the inspection.
In most cases, yes. Standard replacements in an existing opening don’t touch plumbing or electrical. If you want to relocate a door, we check for plumbing and wiring in the wall first, which is common sense on older Artesia homes where the walls are thinner than modern construction.
Expect $600 – $3,500 installed, with most single doors landing near $900 – $1,800. Interior hollow-core doors sit at the low end; fiberglass or steel entry doors with quality hardware sit high. Our Windows & Doors team quotes door installation on the same written estimate as the wider job. Call (888) 255-8179 for an exact quote.
Every door we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on framing, sealing, and hardware. The door manufacturer’s warranty covers the unit itself, and we hand you the paperwork.
Get a Free Door Installation Estimate in Artesia
If your door is sticking, sagging, or letting in air and water, we can take a look and give you a straight number. Call (888) 255-8179 and a live person answers – day or night – to schedule a free on-site estimate for door installation in Artesia. You’ll get an upfront written price with no surprises and a choice of materials. Many homeowners pair this with Chain Link Fence in Artesia or Vinyl Fence in Artesia while we’re already on site.
Written by the team at Groundwork Construction Co.












