







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in La Mirada, CA: What to Expect and What It Costs
Paver driveways in La Mirada typically run $7,000 – $18,000, get permitted through the city, and take about one to two weeks from demo to final joint sand. Most of that time is base work, not the pavers you actually see. Call (888) 255-8179 and we’ll walk your driveway, check the slope and drainage against the city’s requirements, and hand you a line-item number before anything gets torn out.
How a Paver Driveway Gets Built, Stage by Stage

Paver work is mostly invisible labor. The pavers are the last two days. The eight days before that decide whether the driveway still looks flat in fifteen years. Here’s the sequence we run, and where you make decisions.
Stage 1 – Site walk and permit (days 1 – 5, before any work). We measure the driveway, note the slope toward the street, and check where the existing concrete meets the garage slab. In La Mirada the city wants to see how stormwater leaves the property, so we submit a simple plan showing the drainage direction. You decide the paver style and color now, because lead times on Techo-Bloc and Cambridge Pavers can add a week if you pick a specialty finish.
Stage 2 – Demo and haul-off (day 1 of construction). The old slab or asphalt comes out with a skid-steer and a jackhammer, and the debris leaves in dumpsters the same day. If the old driveway hides tree roots or a failed utility trench, we show you before we backfill. Nothing gets buried and forgotten.
Stage 3 – Excavation and base (days 2 – 4). We dig down 8 – 10 inches, then compact a crushed aggregate base in 2-inch lifts. A driveway on a car-and-truck household needs that depth; a walkway doesn’t. This is the stage where corners get cut by cheaper crews, and it’s the reason driveways settle and heave later.
Stage 4 – Edge restraint and bedding sand (day 5). A concrete or aluminum edge restraint locks the field in place so pavers can’t spread at the apron. Then a screeded layer of bedding sand goes down and gets leveled to the final grade. You’ll see us checking the fall with a laser level, not eyeballing it.
Stage 5 – Paver install, cuts, and joint sand (days 6 – 9). Field pavers go down first, then the cut pieces along the garage, the apron, and any curves. We run a plate compactor over the field, sweep polymeric joint sand into the gaps, and mist it to set. That sand is what keeps weeds out and pavers from shifting.
Stage 6 – Final walkthrough (day 10). You walk the driveway with us. We check for lippage, look at the drainage line at the street, and hand over care instructions. The 730-Day Done Right Promise covers the workmanship from that day, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Paver Driveway
Every paver driveway in La Mirada comes down to four decisions. Here’s the honest trade-off on each.
- Paver material. Concrete pavers (Cambridge Pavers and similar) hold up well to Santa Ana wind grit and the summer heat, cost less than clay brick, and come in dozens of shapes. Clay brick looks richer and lasts generations but runs higher and limits your color choices. Techo-Bloc’s tumbled and slab-style lines sit in between on price with a more finished look.
- Laying pattern. A running bond (offset rows) is the standard, fastest, and cheapest. Herringbone and basketweave look sharper at the street and lock together better under tire traffic, but they cost more in labor and cuts. A driveway wider than about 12 feet shows off herringbone best.
- Border and banding. A contrasting soldier course around the perimeter is a common upgrade. It frames the driveway and hides the cut edges at the apron. It adds cost per linear foot, so decide before the layout is set.
- Joint sand and sealer. Polymeric joint sand is standard and keeps the joints locked. A penetrating sealer is optional; it deepens color and slows staining but needs reapplication every few years. We’ll tell you when it’s worth it and when it isn’t.
Concrete base prep is the quiet hero here. Quikrete and Oldcastle supply much of what we set under the pavers, and the aggregate base matters more than the paver brand you pick.
What Paver Driveways Cost in La Mirada, CA

For a standard two-car driveway in La Mirada, budget $7,000 – $18,000. A short single-car apron lands near the bottom of that range; a wide, patterned, bordered driveway with a specialty paver lands near the top. Five things move that number.
- Square footage. The biggest lever. A 20-by-40-foot driveway (800 square feet) sits mid-range; a 1,000-square-foot-plus job pushes past $15,000.
- Existing surface and demo. Old concrete means jackhammering and hauling; old asphalt is easier to remove. If the base underneath is failed, excavation and haul-off add cost.
- Base conditions and slope. A driveway that drains toward the garage or needs a new drain line to the street adds base work and possibly a channel drain.
- Paver and pattern grade. Concrete pavers in running bond are the value end. Clay brick, herringbone, and multi-piece slab styles climb the range.
- Edge restraint and borders. A soldier course and aluminum edge restraint add a modest per-foot charge but keep the driveway from spreading at the apron.
A written estimate includes demo, haul-off, base, edge restraint, bedding sand, pavers, cuts, polymeric joint sand, and cleanup. It typically excludes a new drain line, utility relocation, and any repair to the garage apron if that concrete is cracked. We list exclusions on the estimate so the number doesn’t surprise you later.
See the difference
Before
After
Before
After
Before
AfterWhat La Mirada Homes Specifically Do to This Job
La Mirada is a built-out mid-century community, largely planned in the 1950s and 60s by the La Mirada Land Company. Much of the housing stock is single-story post-war tract homes on original slab foundations with single-car garages. That matters for a paver driveway: the original slabs are often thin, cracked at the apron where the car weight lands, and pitched toward the street in ways that don’t match today’s drainage expectations.
Because the city was largely built out by the 1960s, there’s almost no vacant infill lot, so exterior work here happens on established lots with tight side-yards. Neighbors know the original floor plan, and they also know what your driveway is supposed to look like. Permits and drainage checks are stricter than in the sprawl towns nearby, and a driveway that pushes water onto a neighbor’s lot gets noticed. We pull the permit and plan the drainage line so it doesn’t become a problem. Along the streets near Biola University and the attached housing there, driveways are often short and shared, which changes the pattern choice and the base depth. If you’re also adding a structure, homeowners often pair a new driveway with a ADU Design & Permitting in La Mirada so the layout and drainage get planned together, or with a Garage Conversion ADU in La Mirada when the garage is going to change the driveway’s traffic pattern.
The dry Santa Ana heat and seasonal brushfire pressure from the nearby hills mean exterior work gets scheduled around curing, and the base has to be compacted and covered in the same week so summer heat doesn’t pull the moisture out before the pavers go down.
Serving La Mirada, CA – Our Local Coverage Area
We serve La Mirada and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in La Mirada

A typical two-car paver driveway takes about one to two weeks from demo to final walkthrough, with permits adding five to seven days before that. Most of that time is excavation, base, and compaction. The pavers themselves go down in the last few days. Call (888) 255-8179 and we’ll give you a schedule for your exact driveway.
Yes, most driveway work in La Mirada requires a permit, and the city checks drainage and slope toward the street. We pull the permit and handle the inspection. Call (888) 255-8179 with your address and we’ll confirm what your property needs.
Not the way we’d build it. Overlaying pavers on a cracked or thin slab is fine until the slab fails underneath, and then you’re tearing out the pavers too. Most La Mirada driveways we install involve removing the old surface and rebuilding the base properly. Call (888) 255-8179 for a look at your slab.
Paver driveways in La Mirada run $7,000 – $18,000, depending on square footage, existing surface, base conditions, paver grade, and whether you want a border or specialty pattern. A written line-item estimate lays it out with no change orders. Call (888) 255-8179 for a free estimate.
Our workmanship is covered by the 730-Day Done Right Promise, and the paver manufacturer covers the material. That’s the base compaction, edge restraint, and installation backed in writing. Call (888) 255-8179 and we’ll walk through the details.
Get a Free Paver Driveway Estimate in La Mirada
If you’re ready to price a paver driveway in La Mirada, call (888) 255-8179 for a free on-site estimate. We’ll measure the driveway, check the slope and drainage, and hand you a line-item number with exclusions spelled out. Calls are answered by a live person, day or night. This is one piece of our Driveway & Pavers work across La Mirada, and if the driveway is part of a full Driveway & Pavers in La Mirada project, we’ll scope it together.
Written by the team at Groundwork Construction Co.












