







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Downey Owner’s Guide
We install ActiveYards vinyl and aluminum fencing throughout Downey. Typical installed cost runs $3,500 – $9,000 for a residential run, and most standard yard enclosures are finished in a single site visit once the material is on hand. That price covers panels, posts, caps, gates, and the concrete footings that hold it all upright.

Downey owners usually discover a fence problem in one of two ways. The first is a winter wind event: a gate that suddenly drags on the driveway or a top rail that pops free from its post cap. The second is quiet and slow. A post that was set in bad soil leans a little more each summer until the whole section looks drunk. ActiveYards makes a strong product, but no fence defeats clay, irrigation runoff, and the Long Beach Fault footprint we all live on. When something gives, you want the right part the first time, not a hardware store guess.
One note up front: we’re an independent service provider and not affiliated with ActiveYards. We install and repair their systems, and we’ll tell you plainly whether a factory part or a quality equivalent is the smarter buy for your situation.
Which ActiveYards Models This Applies To

ActiveYards sells through a network of series lines rather than a single universal product. Their vinyl fencing comes in a handful of profiles, and the differences matter at the part level. Post caps, gate hardware, and accent trim are sized to a specific post dimension, usually 4×4 or 5×5, and that dimension changes how a replacement post sleeve or cap fits. Aluminum systems have their own rail gauges and bracket styles, and the picket spacing differs between residential privacy lines and ornamental ones.
To identify what you have, start at a terminal post and a gate post. Measure the outside face of the post with a tape, then look at the underside of the top rail where the manufacturer sometimes stamps a series code. If the fence was installed before you bought the house, the original contractor’s sticker may be inside the gate post or on the back of a gate hinge. Take photos of the gate, the post caps, and any stamping before you call anyone.
On the OEM question: factory ActiveYards parts fit correctly with no fiddling, and for gate hardware and structural components we usually recommend them. For trim caps, decorative inserts, and picket sections in standard profiles, a quality aftermarket match is often indistinguishable once installed and easier to source quickly. We make that call with you line by line. One detail that trips people up: a common compatibility gotcha in mid-2010s installs is that post caps were made for a true 4-inch post, and today’s nominal 4×4 pressure-treated posts run slightly wider, so a stock replacement cap can sit crooked until the post is sleeved or shimmed properly. Measure, don’t assume.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Fence Installation Is Failing
- A post that leans after rain. Water is pooling at the footing and the soil has lost its grip. This points to an undersized or shallow footing, not a bad post.
- A gate that sags or drags. The gate hinges or the gate post have shifted. Hinge plates loosen over time, and a gate post that wasn’t set deep enough in Downey’s clay will move with the seasons.
- Separation at the post cap or rail joint. UV exposure and expansion-contraction cycles have worked the joint loose. In our climate the vinyl sees intense summer sun and cool coastal mornings, and that swing is hard on push-fit connections.
- Bowed rails or wavy panels in full sun. A sign of rail sag between wide-set posts or a dropped footing. Vinyl rails have load limits, and posts spaced too far apart push past them.
- Cracked pickets or a gate post with visible cracks low down. Impact damage is the usual cause, but repeated stress near a hinge concentrates on the same spot. Cracks at the footing height are the ones to address before winter.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Downey, plan on $3,500 – $9,000 for a full ActiveYards fence installation, or the part-replacement equivalent when we’re repairing a failing section. The range moves with linear footage, post spacing, gate count and style, and how much old material has to come out and get hauled away.
Here’s what drives the number, and here’s the transparency piece. Structural parts, like gate posts, hinges, and footing repair, cost more than trim and caps. We quote parts and labor as separate lines on a written estimate, so you see exactly what the material costs and what the work costs. The number you see is the number you pay. And the work is covered under our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some things you can check safely yourself. Walk the fence line after a rain and look for pooling at the base of each post. Open and close the gate, watch where it catches, and note which hinges look loose. Photograph any cracked or separated joint. That’s information, and we’re happy to look at it with you.
Where DIY goes wrong on an ActiveYards system is in the footing and the post. A fence post carries real load, and a shallow or poorly set footing is what fails first. Digging out and resetting a post near buried irrigation, gas lines, or downed power is the part we strongly recommend leaving to a trained crew. It’s a genuine safety matter, not a scare tactic. Get it wrong and you’re back to square one or worse. Call us at (888) 255-8179 and we’ll tell you honestly what needs replacing and what doesn’t.
FAQs

A properly installed ActiveYards vinyl fence typically lasts 20 to 30 years in Southern California’s climate. The fence material itself holds up well to sun; the failure point is almost always the footing and the post, not the vinyl. Our technicians have up to 12 years of experience setting posts the first time so they don’t lean in clay.
Yes, often just the damaged section, post, or gate hardware can be replaced while the rest of the fence stays. We’ll inspect the whole run and give you a written line-item estimate for the repair before doing anything. Call (888) 255-8179 for a free estimate and we’ll tell you what’s worth fixing and what isn’t.
Most single-section or gate hardware replacements are done in a few hours, and most jobs are completed in a single visit. A full fence installation takes longer and depends on footage, gates, and footing work. You’ll get a clear timeline in the written estimate before we start.
We identify your series and post dimensions from photos and measurements, then match factory parts or a vetted equivalent, depending on what fits best and what’s available. We are an independent service provider, not affiliated with ActiveYards, but we install their systems regularly and know which parts match which series. Call (888) 255-8179 and we’ll pull the right material for your job.
We also install and repair leading products from KraftMaid, Cambria, and Silestone, along with roofing, windows, and driveways, all under the 730-Day Done Right Promise.
Ready to get your fence fixed the right way? Our Downey team answers the phone with a live person 24/7, gives you upfront pricing with no surprises, and stands behind every install in writing. Call (888) 255-8179 for a free estimate today. Take $1,000 off projects over $10,000, and 0% financing is available for 18 months.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












