







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Kitchen Remodeling: The Downey Owner’s Guide
We install and refresh Atlas-compatible kitchen remodels, and in Downey that work typically runs $14,000 to $45,000 depending on cabinet count, countertop material, and whether the layout moves. This is planned construction, not an emergency repair, so we schedule it properly and quote it line by line before anyone picks up a tool. You get upfront pricing, a written scope, and the 730-Day Done Right Promise on the finished work.

Most owners don’t start with “I want a remodel.” They start with a symptom. A cabinet door that hangs crooked no matter how many times it’s tightened. A countertop seam near the sink that has gone dark and soft. Drawers that stick only in summer. A backsplash grout line that keeps cracking above the cooktop. In Downey’s older kitchens, these small failures tend to show up together, because the parts that fail first are the same parts everywhere: hinges, drawer glides, caulk joints, and the substrate under a counter that got wet years ago.
Which Atlas Models This Applies To

Atlas has made cabinets across several lines, and the part you need depends on which line you have, not which kitchen you have. The quickest way to identify yours is the label inside the cabinet door or on the back panel of a base cabinet. It usually carries a series code and a door style name. Failing a label, measure the hinge cup bore (the round recess drilled into the door); Atlas doors are commonly bored at 35mm, which is the modern standard, but older lines used a smaller cup and a hinge that isn’t interchangeable with today’s soft-close units.
Drawer glides are the second gotcha. Box slides and side-mount slides are not swappable, and the mounting hole pattern differs between them. Measure the cabinet opening depth and the existing slide’s mounting hole spacing before you order anything. For Atlas specifically, OEM hinges and glides are available but often ship at a premium and in limited finishes. A quality aftermarket equivalent from a name brand will fit the same bore and hole pattern and typically costs less. We’ll tell you when OEM is worth it (matching an existing finish on a visible hinge) and when it isn’t (a glide hidden inside a drawer box). We also service KraftMaid, Cambria, and Silestone kitchens, so if your remodel pulls in new countertops we can match the cabinet work to them.
One note on who we are: Groundwork Construction Co. of Downey is an independent contractor. We’re not affiliated with Atlas, and we don’t represent them. We install and repair their products, and we’ll be straight with you about when a part is worth replacing versus when the whole cabinet run is at the end of its life.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Kitchen Remodeling Is Failing
Here’s what we actually see on Downey jobs, and what’s underneath each symptom.
- Doors that sag or won’t stay closed. The hinge screws have stripped out of the particleboard or the hinge itself has worn. In a 15-year-old cabinet, the wood at the screw hole is usually the real problem, not the hinge, and a fresh hinge in a stripped hole just pulls loose again.
- Drawers that stick in warm weather and glide in winter. The glide rollers have flat-spotted or the track has swollen. Downey’s dry summers and cooler winters work wood and slides back and forth, and a worn nylon roller shows it most in July and August.
- A dark or soft line along the countertop seam. Moisture has gotten into the seam near the sink or dishwasher and the substrate has started to fail. Left alone, this is where countertops crack and where cabinets below begin to swell.
- Grout cracks above the cooktop or at inside corners. Heat cycling plus the normal movement of a house opens the joint. Cracked grout is a water path into the drywall behind the backsplash, so it’s worth fixing before the tile starts to tent.
- Cabinet boxes that have pulled away from the wall. The mounting screws have loosened or the wall behind them has softened. This one is not cosmetic; a box that’s separating can come down, and it’s the symptom that most often pushes a repair into a full remodel.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Kitchen remodel pricing in Downey is driven by cabinet count, countertop square footage, and whether the layout changes. Here’s how the ranges land for the work we quote most often:
| Scope | Installed price in Downey |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the top of the range: moving plumbing or gas, adding an island, and a countertop upgrade to quartz. What keeps it at the bottom: keeping the layout, reusing the appliance locations, and standard-size cabinets. Every quote is line-item, parts and labor separated, so you can see exactly what a hinge set or a glide track costs against the install labor. The number you see is the number you pay, and the finished work carries the 730-Day Done Right Promise.
DIY or Call Us?
Some of this is safe to handle yourself. You can tighten a hinge, clean a glide track, re-caulk a countertop seam, and re-grout a small backsplash joint. Those are low-risk and don’t involve anything that can hurt you or flood your kitchen.
Where DIY goes wrong is deeper in. A cabinet box that’s pulled from the wall is a load-bearing install problem, and rehanging it wrong risks it coming down on someone. Cutting into a backsplash near an outlet, or swapping a sink, puts you near wiring and plumbing that need to be shut off and done to code. And a countertop seam that’s gone soft means the substrate under it is wet; patching the surface hides a problem that keeps spreading. Our technicians have up to 12 years of experience, and we’ll tell you honestly when small is small and when it’s a remodel. Call (888) 255-8179 for a free estimate, and a real person answers around the clock.
FAQs

Expect the box and door to outlast the hardware by a wide margin. In Downey’s climate, hinges and glides are the first things to go, usually in the 10 to 20 year range, while a solid wood door can run 30 years or more with care. The soft parts wear; the cabinet doesn’t have to.
Often yes. A stripped hinge screw can be filled and re-drilled, and a single worn glide can be swapped without touching the rest. Repair stops making sense when several boxes are pulling from the wall or the substrate under a counter is soft, because at that point you’re rebuilding, not repairing. Call (888) 255-8179 for a free estimate and we’ll give you the straight answer on your kitchen.
A set of hinges or a handful of glides is usually a single-visit job. A full cabinet installation or a countertop swap spans multiple days, and a full kitchen remodel in Downey runs weeks, not hours. We’ll give you a written timeline with the quote so you know what to expect.
We identify your model line from the label or by measurement, then order OEM where the finish is visible and a matching aftermarket equivalent where it’s hidden. We don’t claim to stock Atlas parts or carry them on a truck; we source the right part for your cabinet, which means it fits the first time. Call (888) 255-8179 to get started, and ask about the free design consult and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












