







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Downey Owner’s Guide
We install and repair Boral roof systems across Downey, and most Boral roof work here – replacing cracked concrete tiles, re-bedding ridge caps, fixing flashing at penetrations – runs $400 to $1,800 for repairs and $8,000 to $20,000 for a full replacement. We can usually get an installer out to look at a leaking or failing Boral roof within a day or two, and estimates are free. Homeowners here typically discover the problem the same way: a brown water stain blooms on the ceiling after a winter storm, a tile slides loose near the ridge, or they find a pile of broken tile fragments in the side yard after a windy night. Downey’s clay soils and hot, dry summers put real stress on a Boral roof, and the failures tend to cluster at the same spots.

Key Takeaways
- Boral concrete and clay tiles are matched by profile, dimension, and color lot – not “close enough.”
- Repairs here run $400 to $1,800; full replacements $8,000 to $20,000.
- Most leaks trace to failed underlayment or flashing, not the tile itself – which is why a same-profile swap alone doesn’t fix it.
- We’re an independent installer, not affiliated with Boral, so we source the right part to match your roof, not whatever’s on hand.
Which Boral Models This Applies To

Boral’s concrete and clay tile lines are the ones you’ll find on Downey roofs, and matching them is where most homeowners get stuck. The common profiles are flat tiles like the Boral Saxony and the larger flat and low-profile lines, plus the barrel and S-tile profiles used on Mediterranean-style homes throughout Southeast LA County. The brand you’re matching is Boral, but the tricky part is that a Boral tile profile has a specific width, thickness, and interlock pattern – and a “barrel tile” from a different maker often won’t lock into a Boral run without showing a visible seam.
To identify what you have, measure the exposed width of one tile, note the profile shape, and look for the stamp on the underside of a broken piece or a spare tile left in the garage. Boral tile color also runs in dye lots, so a replacement tile from a different batch may look slightly off against aged tile even when the profile matches – which matters less in a field repair and more on a visible slope. On the OEM-versus-aftermarket question: for a small repair, a quality aftermarket tile matched by dimension and profile is usually fine. For anything visible from the street or a full slope, we source a true Boral-compatible tile so the repair disappears. We don’t stock parts and don’t carry tile on a truck – we match and order the right piece for your roof.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
Boral tile is a 40-to-50-year roof surface in ideal conditions, but in Downey’s inland heat and sun the underlayment beneath it often gives out years before the tile does. Here’s what to watch:
- Water stains on the ceiling or in the attic after rain. This almost always means the underlayment or a flashing point has failed, not that the tile itself broke – the tile sheds most water, but the membrane underneath is the real barrier.
- Loose or sliding tiles near the ridge or eaves. Ridge caps and edge tiles are mechanically fastened, and heat cycles plus age work the fasteners loose. A tile that slides out of line is a wind and water entry point.
- Cracked or delaminated tile surfaces. Hairline cracks are common and often harmless, but a tile that’s flaking or crumbling points to freeze-thaw or impact damage that needs replacement.
- Granule or mortar debris in the gutters and yard. Shedding from the ridge mortar bed or aging tiles shows up as grit and sand collecting at the downspouts – a sign the bedding is breaking down.
- Daylight or dampness in the attic at a penetration. A plumbing vent, skylight, or chimney flashing that’s pulled away from the tile field lets water track sideways under the tile and shows up far from the actual breach. This is the most misdiagnosed leak we see in Downey.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Boral roof work in Downey, expect $400 to $1,800 for a repair and $8,000 to $20,000 for a full replacement, with pricing driven by roof size, pitch, tile profile, how much underlayment has to be replaced, and whether the deck needs work. A small field repair – a handful of tiles, a flashing reset – sits at the low end. A full replacement includes tearing off the old tile, new underlayment, new tile in a matched profile, and finished flashing at all penetrations.
We give you a written line-item quote: the parts, the labor, and the underlayment are separate lines, so you see exactly what you’re paying for. The number we quote is the number you pay, and the work is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
DIY or Call Us?
You can safely walk your roof from the ground with binoculars, check the attic for stains after a rain, and look at the gutters for tile grit. What you shouldn’t do is climb up and start pulling or resetting tile yourself. Beyond the fall risk, Boral tile is brittle and heavy, and walking a tile roof without the right technique cracks tiles you didn’t mean to touch; pulling a tile to check the underlayment can also open a leak you didn’t have. The bigger reason to call: most “failed tile” problems are actually underlayment or flashing failures, and swapping the visible tile without fixing the layer beneath just hides the leak until the next storm.
Call (888) 255-8179 and we’ll send someone out to look at your Boral roof and give you a straight answer on repair versus replacement – the estimate is free.
FAQs

The tile surface can last 40 to 50 years, but the underlayment underneath it usually needs attention well before that in Downey’s heat – often in the 15-to-25-year range depending on ventilation and sun exposure. The tile outlasting the membrane is the single most common surprise we run into here. Call (888) 255-8179 for an inspection and an honest read on yours.
Often, yes – a localized leak, a few cracked tiles, or failed ridge mortar can be repaired for $400 to $1,800 without touching the whole roof. The deciding factor is the condition of the underlayment across the rest of the field, not the tile you can see. We’ll tell you plainly which one you’re facing.
A straightforward field repair – a handful of tiles and a flashing reset – is usually a single visit, a few hours on site. Anything that requires lifting a larger section to reach failed underlayment takes longer, and we’ll tell you the timeline up front. Call (888) 255-8179 to schedule your free estimate.
We match by profile, exposed dimension, and color lot – measured from your existing tile and identified from the stamp on a broken piece – and order a Boral-compatible tile rather than grabbing a generic lookalike that won’t lock into your run. We don’t keep parts in stock; we match your specific roof. As an independent installer we’re not affiliated with Boral, so the match is driven by your roof, not a brand quota. Call (888) 255-8179 and we’ll get the right tile ordered.
Whether your Boral roof needs a single tile swapped or a full replacement, Groundwork Construction Co. of Downey handles it from first inspection to final walkthrough, backed in writing by our 730-Day Done Right Promise. We also install and repair with brands like KraftMaid, Cambria, and Silestone across our other trades. Call (888) 255-8179 for a free estimate – a live person answers, day or night.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












