







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The Downey Owner’s Guide
If you own a CGI fence and it needs repair or replacement, we install CGI-compatible fence systems across Downey for $3,500 to $9,000 installed for a full vinyl run, depending on linear footage, panel style, and gate count. We’re an independent contractor, not affiliated with CGI, and we source panels, posts, and hardware matched to your existing run so the new section lines up visually. If you need it done soon, call (888) 255-8179 and we’ll get you scheduled.

Most Downey owners figure out there’s a problem the same way: a panel starts sagging after a hot spell, a post turns wobbly at the base, or a gate that swung clean for years suddenly drags on the concrete. CGI builds solid vinyl and composite fencing, but Southern California sun and our heavy winter rains push any fence past its expected life faster than the label claims.
Which CGI Models This Applies To

CGI makes several fence product lines, and the reason this matters is that panel thickness, post spacing, and rail profiles are not interchangeable across them. CGI’s standard vinyl privacy fence typically runs panels in the 6-foot to 8-foot width range with 5×5 or 4×4 posts, but you’ll find both. Before you order anything, look at the sticker or stamped mark on the inside face of a post or the tongue-and-groove lock on a panel. If the label is gone, measure: post outside diameter, panel thickness (usually somewhere between three-quarters of an inch and an inch for vinyl), and the distance from one post centerline to the next.
The OEM-versus-aftermarket call for CGI is practical. CGI’s proprietary panel profiles are worth matching if you’re replacing a section in a visible run, because a panel from a different manufacturer won’t lock into the existing grooves. For posts and rails, a quality aftermarket equivalent is fine and often cheaper, since those are standard dimensions. We carry neither parts nor trucks stocked with inventory, so we source matched components per project after we’ve measured your run.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Fence Installation Is Failing
- Sagging panels between posts. The rails have lost stiffness or a rail-end bracket has pulled free. This usually happens when a fence runs long distances with inadequate rail reinforcement.
- Wobbly posts, especially after rain. The concrete footing has cracked or the post has shifted in loose soil. Downey’s clay-heavy ground swells and shrinks with the seasons, so footings that were fine in summer can loosen by winter.
- Gate dragging or hard to latch. Hinge screws have pulled from the post or the post itself has tilted. A gate that won’t close is the most common failure call we get in Downey.
- Faded, chalky, or cracking vinyl. UV exposure on west-facing runs in Downey fades standard vinyl faster than shaded sides. Cracking along panel edges usually means the material has become brittle.
- Sunken or heaved concrete at the base. The footer has cracked or shifted from soil movement. If the post is still plumb, the footer can often be repoured without replacing the post.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Downey, full vinyl fence installation runs $3,500 to $9,000. Aluminum goes $4,000 to $10,000. Three to four factors move the number: total linear footage, post count, gate count, and whether old fencing needs haul-away. A repair (repouring a footer, replacing one rail) is a fraction of that. We quote line by line with parts and labor broken out, so you see what the panel costs versus what installation costs. If work starts, the price doesn’t change unless you ask for something new, and the entire job is covered by our 730-Day Done Right Promise.
DIY or Call Us?
What you can safely check yourself: post plumb with a level, rail connection tightness, gate hinge screws, and footing condition at the base. What goes wrong when DIY meets CGI fencing is measurement and footing. A post set in soil without enough concrete will lean again within a season, and a panel ordered one dimension off won’t lock into your existing run. We handle the measurement, sourcing, and install in one pass, most jobs done in a single visit. Call (888) 255-8179 to get it scheduled.
FAQs

CGI vinyl fencing typically lasts 15 to 20 years in Southern California, though the west-facing runs in Downey fade and chalk faster than shaded sides because of sustained UV exposure. Footings and post hardware are usually what fail first, not the vinyl itself.
Yes, in many cases. If the post is plumb and the panel is intact, we can repour a cracked footer or replace a single rail for a fraction of a full replacement. We’ll tell you plainly after an on-site look whether repair makes sense or the section is past saving. Call (888) 255-8179 for a free estimate.
Most CGI fence replacements in Downey are completed in a single visit, assuming no unusual site conditions. If old fencing needs haul-away or footings need repouring, it can stretch to a second day. We’ll give you a realistic timeline before work starts, not after.
We measure your existing run and identify the panel and post profile, then source matched components from suppliers who carry CGI-compatible lines. We don’t stock parts, so nothing comes off a truck. Every component is ordered to fit your specific run before we start.
Ready to get your CGI fence back in shape? Call Groundwork Construction Co. of Downey at (888) 255-8179 to schedule your free estimate. A live person answers 24/7, our technicians are background-checked and arrive in uniform, and every install is backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












