







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Downey Owner’s Guide
We install KraftMaid-compatible bathroom cabinetry and fixtures in Downey, and a full bathroom remodel with KraftMaid vanities and storage typically runs $9,000 – $28,000 installed. A single vanity swap is a much smaller job, and we schedule those as soon as the replacement arrives and the site is ready. Most Downey owners find their bathroom is failing the same way: a vanity door that sags and won’t stay shut, a drawer box that drags on the rail, or a cabinet face near the tub that has swelled and separated from its frame. It usually starts small, one hinge or one sticky drawer, then spreads to the whole run within a season.

Which KraftMaid Models This Applies To

KraftMaid builds bathroom cabinetry across several lines, and the correct replacement part depends on which line and which door style you have. The easiest way to identify yours: open the cabinet door and find the manufacturer label inside on the back wall or on the side of the box. That label lists the model and the finish code. If the label is gone, measure the cabinet opening and the door overlay (the amount the door sits over the frame). KraftMaid’s standard bath vanity depths are built around a specific set of overlay dimensions, and a door cut to the wrong overlay will either rub the frame or leave a visible gap. For newer KraftMaid lines, soft-close hinges use a specific cup-bore diameter and screw pattern that older aftermarket hinges don’t match.
On the OEM-versus-aftermarket question: OEM KraftMaid parts match the original finish and fit exactly, but the lead time can stretch into weeks for a discontinued door style or a custom color. A quality aftermarket hinge or drawer slide can close the gap in days and runs fine if it matches the cup bore and load rating. We tell Downey owners to go OEM when the door face or finish is visible in the room and aftermarket when the part is hidden and the fit spec is clean. We do not stock parts and cannot promise a part is on a shelf, but we can confirm compatibility before you order. Groundwork Construction Co. of Downey is an independent service provider and is not affiliated with KraftMaid.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Bathroom Remodeling Is Failing
Here’s what we see when we open up a failing KraftMaid bath run in Downey:
- A vanity door that sags and won’t close flush. The hinge plate or cup has stripped out of the cabinet frame, usually because the hinge was over-torqued at install or the particleboard core has softened from years of steam exposure.
- Drawers that stick or jump the track. The slide’s ball bearings are worn or the glide rollers have flattened, so the drawer box drops a few millimeters and starts dragging against the frame.
- Swelling and delamination near the tub or shower. KraftMaid’s box construction handles moisture better than most, but if a seal or caulk line failed, the particleboard core near the wet zone takes on water and the veneer lifts. Once the edge swells, the door won’t sit flat against the frame.
- Peeling or blistering finish on the door face. In Downey, the inland heat and the interior humidity from an unvented bath can push a painted or stained finish to fail earlier than the label suggests, especially on lower doors near the floor where condensation collects.
- Cracks at the hinge screw holes or drawer-glide mount points. The cabinet box is flexing under load, usually because the original installation didn’t anchor the vanity to the wall studs correctly or the floor is out of level.
One thing we regularly see in Downey: a vanity that was installed against a wall with a poor caulk seal at the counter and the floor. Steam from the shower works into that gap, the cabinet panel absorbs it, and the door face near the floor starts to delaminate within a few years. The fix isn’t just a new door. The seal has to be redone correctly or the replacement fails the same way.
Replacement Cost & What’s Included
Here’s the range we quote for a KraftMaid bath remodel in Downey, with line-item breakdowns so you can see where the money goes:

| Line Item | Typical Installed Range |
|---|---|
| Full KraftMaid bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Bathroom vanity installation | $800 – $3,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
What moves the number: whether the vanity box itself has to come out, whether the finish is a standard color or a custom order, and whether the wet zone requires re-sealing before the new doors go back on. The upfront price we give you is the number you pay. No change orders for the parts and labor we’ve already quoted. The work carries our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can check the manufacturer label and confirm the model before you order, and that’s the right first step. If the issue is a loose hinge screw, you can tighten it or fill the hole with a wood hardener and re-drive the screw. What trips most Downey homeowners: the door overlay on KraftMaid cabinetry is precise, and a door cut to the wrong spec or hung on the wrong hinge won’t sit flush, no matter how carefully it’s aligned. Swapping the hinge type or the drawer slide without matching the cup bore and load rating means the door hangs crooked or the drawer fails again under the same load. If there’s any plumbing involved, or the cabinet is water-damaged at the core, that’s past DIY territory. Call (888) 255-8179 and we’ll confirm the part and get you a written quote.
FAQs

A quality KraftMaid hinge and drawer glide typically lasts 10 – 15 years in a normal bathroom, but in Downey the inland heat and interior humidity can shorten that to 7 – 10 years on lower doors near the floor or the shower. Call (888) 255-8179 for an exact quote. Estimates are free.
Sometimes. A stripped hinge screw hole can be filled and re-driven, and a drawer glide that’s just misaligned can be re-seated. If the cabinet core has swelled or delaminated, replacement is the only fix that holds. Call (888) 255-8179 and we’ll tell you which you’re looking at.
A single vanity door or drawer glide swap is usually a short job once the correct part is on site. A full bath cabinet run with multiple doors and a new vanity takes longer and depends on whether the existing box is sound. Call (888) 255-8179 to schedule a free estimate.
We identify the model from the label inside the cabinet or from precise measurements, confirm the compatibility spec, and then order from the maker or a matching aftermarket source. We tell you upfront whether it’s OEM or aftermarket and what the lead time is. Cambria, Silestone, and Kohler are part of the same catalogue we work from for countertops and fixtures. Call (888) 255-8179 for a written quote.
Get Your Free Estimate
We’ve been serving Downey and the surrounding communities since 2014, and every job is covered by our 730-Day Done Right Promise. Calls are answered by a live person 24/7, and our technicians arrive in uniform and background-checked. Our technicians have up to 12 years of experience matching KraftMaid parts and installing bath cabinetry the right way the first time. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months. Call (888) 255-8179 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co. of Downey, serving Downey and nearby areas.












