







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Norwalk, CA
We provide independent Mr-Glass service across Norwalk, CA, and the thing that separates our work here is that we install and repair shower glass for the houses Norwalk actually has: mid-century stucco tract homes with settled wall framing, shallow slabs, and hard dry-season water. We’re not authorized, sponsored, or endorsed by Mr-Glass, but the product line is the only thing we do, and we know how it behaves in these bathrooms. That focus means fewer surprises when you’re replacing an enclosure in 90650 or finally converting that 1960s tub-and-curtain setup to a frameless walk-in. Call (888) 255-8179 to schedule a free estimate.

Why Norwalk Residents Choose Us for Mr-Glass Service

Most of Norwalk was built out in the 1950s and 1960s, and the bathrooms haven’t changed since. Norwalk homeowners call us because we’ve templated hundreds of showers in exactly that generation of house, so we already know the hinge side is probably out of plumb and the curb is likely not level before we ever open the door.
We use genuine Mr-Glass hardware – hinges, rollers, handles, and seals – whenever the model is still supported. Aftermarket parts often mismatch the original hole pattern and glass thickness, and that mismatch is what causes leaks three months later. Our technicians have up to 12 years of experience working with this brand, and we treat a shower enclosure as an engineering problem, not just a glass order.
Response time matters here. Calls get answered by a live person around the clock, so you’re not stuck leaving voicemail while a cracked pivot door sits in your only hall bathroom. Estimates are free and written line by line. And every install comes backed by the 730-Day Done Right Promise – if it isn’t done right, we make it right. If you want the full picture of what we handle, our Mr-Glass service page covers the whole product catalog.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Norwalk
- Hinge-side leaks and panel sag on frameless swing doors. Norwalk’s original 1950s and 1960s wall framing has settled unevenly over a shallow slab, so a 1/2″ tempered panel hung without shimming pulls away at the hinge and weeps onto the floor. We re-shim the hinge side and re-set clearances rather than just re-caulking.
- Hard-water spotting and mineral etching on clear glass. Norwalk’s tap water is hard, and the long, rainless summers mean deposits bake on. Enclosures with no factory coating, or a worn coating film, etch permanently. We’ll tell you honestly when coating is the fix and when the glass is past saving.
- Cracked or chipped pivot and hinge glass in bypass doors. Small hall bathrooms see a lot of traffic, and years of slamming takes its toll on 3/8″ pivot panels. Chips at the pivot edge are a structural problem, not cosmetic.
- Perimeter seal failure and mold-blackened caulk. A prior DIY install that left the curb or the stucco-side jamb out of plumb lets spray track behind the glass. The visible mold is usually the second problem; the first is the geometry.
- Moisture detailing after a Santa Ana wind season. The occasional heavy winter storm that follows months of dry weather finds every failed seal. We look at flashing and drainage around the enclosure, not just the caulk line.
Mr-Glass Service in Norwalk: What Local Conditions Mean for Your Equipment
Here’s the local fact that shapes almost every job we do in Norwalk: narrow lots with detached rear garages accessed by a single driveway are the norm, not the exception. That matters because the same tract house often gets a garage conversion at the back while the main bath is remodeled inside – so glass panes and enclosure crates have to be staged down a tight driveway with no side-yard access. We measure the path before we order, because a templated 60″ panel that can’t make the turn is a wasted week. In a typical Norwalk ranch bath from the 1950s or 1960s, an original tub-and-curtain setup gets converted to a walk-in with a Mr-Glass frameless panel, and the install exposes out-of-plumb stucco-era framing and a slightly settled slab. That’s why we template on site instead of ordering from nominal dimensions. A qualified pro shims the hinge side, rebuilds the curb, and sets tempered panels with correct clearances before the glass goes up.
Mr-Glass Models & Products We Service in Norwalk
We handle the full Mr-Glass line that shows up in Norwalk homes: frameless hinged swing shower doors in 3/8″ and 1/2″ tempered glass, semi-frameless sliding and bypass tub-shower enclosures, Neo-Angle corner units for small bathrooms, and custom-cut mirrors and glass shelving for remodeled baths.
We don’t stock Mr-Glass parts locally. Genuine replacement hinges, rollers, handles, and seals are sourced per job against your exact model number, which takes a bit longer but means the hole pattern and glass thickness match the original. Where the glass itself is chipped or the coating is gone, we’ll tell you that replacing the enclosure is more honest than repairing hardware on failing panels.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Norwalk

Pricing depends on glass thickness, whether the curb needs rebuilding, and how much framing correction the wall requires. Here are the ranges we work within:
| Service | Typical Price Range |
|---|---|
| Frameless Glass Shower Enclosure | $4500 – $12000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Shower Replacement | $3000 – $8500 |
A free estimate includes an on-site template, a written line-item quote, and a straight answer about whether you need new framing or can work with what’s there. No change orders once the number is on paper. Call (888) 255-8179 for an exact quote – estimates are free.
Serving Norwalk, CA – Our Local Coverage Area
We serve Norwalk and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Norwalk
Yes, in most cases. We shim the hinge side and rebuild the curb to correct for settled framing, which usually means no wall demolition. We’ll confirm at the template.
Almost always because the panel was hung on settled Norwalk wall framing without proper shimming, so the door pulls away from the seal. Call (888) 255-8179 to have it looked at before the leak damages the subfloor.
Yes, especially when there’s no factory coating or the coating has worn off. Deposits from dry-season tap water etch glass permanently if left. A coated enclosure and a squeegee habit prevent it.
We measure the delivery path first – single driveway, no side-yard access – and stage panels accordingly. Sometimes that means hand-carrying rather than a full crate delivery. Call (888) 255-8179 and we’ll plan it with you.
Replace it. A chip at the pivot edge is a structural risk on tempered glass, and repairing hardware around damaged glass isn’t a real fix. We’ll quote both so you can decide. Call (888) 255-8179 for a free estimate.
Service Areas Near Norwalk
We also work with homeowners in Downey, Bellflower, Santa Fe Springs, and Pico Rivera, plus Cerritos and Artesia, all within a short drive of our Norwalk service area. The same mid-century housing stock shows up across that corridor, so our templating approach carries over.
Book Your Mr-Glass Service in Norwalk Today
Whether it’s a leaking hinge, an etched panel, or a full tub-to-shower conversion, call (888) 255-8179 for a free estimate. We answer 24/7 with a live person, and our technicians arrive background-checked and in uniform. Most jobs are completed in a single visit.
Written by the team at Groundwork Construction Co. of Downey.












