







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Cerritos, CA: What It Costs and How Long It Takes
A chain link fence in Cerritos typically runs $3,500 to $9,000 for a standard residential lot, with most single-family backyards landing between $4,200 and $6,800. A straightforward run of 150 to 200 linear feet is usually a two-day job: posts set in concrete on day one, fabric stretched and gates hung on day two. If your property sits inside one of Cerritos’s planned developments, add a week or two up front for architectural review before we order a single panel. Call (888) 255-8179 for a free on-site estimate with a written, line-item price.
What the Work Actually Looks Like, Stage by Stage

Chain link is one of the few exterior projects where the schedule is genuinely predictable. Here’s how we run it, and where you’ll be asked to make a call.
1. Site walk and property line check (day 0, about 60 minutes)
We measure the run, find the existing property pins or pull the lot lines from your plat, and mark the post locations with you standing there. This is the stage where you decide the fence height (4, 5, or 6 feet) and confirm the exact line, because moving a fence after concrete sets is a demolition job, not an adjustment. In Cerritos’s older tracts, pins are often buried or missing, so we budget time for a surveyor referral when the line is genuinely unclear.
2. Architectural review and permit filing (5 to 15 business days, city-dependent)
If you’re in a PUD or HOA, this is the long pole. We assemble the submittal for you: fence height, post spacing, fabric color (galvanized silver, black, or green vinyl-clad), gate style, and a site sketch showing setback from the property line. Cerritos’s design review is exacting, and a submittal that doesn’t match the community’s existing palette gets kicked back. We’d rather spend an hour getting the packet right than lose two weeks to a correction letter. Where the city requires a fence permit, we file that in the same window.
3. Demo and layout (day 1 morning, 2 to 4 hours)
Old fencing comes out and goes to the dumpster. We confirm the line against the approved plan, then mark every terminal post, corner, and gate post. Terminal posts carry the tension, so their placement is the one thing we don’t eyeball. Call 811 for utility locating before anyone digs – that’s a free service and it’s not optional.
4. Posts, concrete, and cure (day 1 afternoon into day 2)
We auger the holes, set line posts roughly 8 to 10 feet on center, and pour concrete footings. Terminal posts get the deeper, wider footings because they take the pull of the entire run. Concrete needs to cure before the fabric goes up under full tension; on a warm Cerritos afternoon that’s a day, which is why a two-day schedule is realistic and a half-day promise isn’t.
5. Fabric, top rail, and gates (day 2, 4 to 6 hours)
Top rail and tension wire go on, fabric gets stretched and tied, and the gates hang and swing. We walk the line with you, test the gate latch, and show you the tension. You sign off on the same visit – and the work is covered by our 730-Day Done Right Promise, so if a post starts leaning or a gate sags in the next two years, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before We Order Material
Chain link is a simple product with a few decision points that genuinely change how it looks and how long it lasts.
- Fabric gauge and coating. Standard residential is 11.5-gauge galvanized. Heavier 9-gauge lasts longer and resists dogs and kids leaning on it. Vinyl-clad (black or green) costs roughly 15 to 20 percent more and hides rust blooms better in coastal-influenced air.
- Height. 4 feet for a boundary line, 5 to 6 feet for pets and privacy screening. Taller means more wind load and heavier posts, so the price moves with it.
- Post gauge and footing depth. 16-gauge line posts are builder-grade; 15 or 14-gauge wall thickness holds up better over a 20-year horizon. Deeper footings matter on Cerritos’s older lots where fill and settled soil show up.
- Gate style. A walk gate with a self-closing hinge, a double drive gate, or a cantilever slider for a driveway. Sliders cost more but don’t need swing clearance.
- Privacy options. Fabric privacy slats or a hedge behind the fence. Slats are the cheaper route; they also trap debris, so plan on rinsing them a couple times a year.
What a Chain Link Fence Costs in Cerritos, CA

Expect $3,500 to $9,000 for a residential chain link fence in Cerritos. Most jobs land in the middle. Here’s what moves you toward either end.
- Linear footage and corners. Every corner and end post is a terminal with a heavier footing. A simple rectangle is cheaper per foot than a lot with four jogs.
- Existing conditions. Removing and hauling an old fence, grinding stumps, or digging through tree roots and hardscape adds labor.
- Gates. A basic walk gate is modest; a wide double drive gate or an automatic slider is a different line item.
- Material grade. 9-gauge vinyl-clad fabric with heavier posts sits at the top; 11.5-gauge galvanized at the bottom.
- Permit and design review scope. A city fence permit and an HOA submittal add cost, and a surveyor referral on a fuzzy property line adds more.
A written estimate from us covers demo and haul-away, posts, concrete, fabric, top rail, gates and hardware, cleanup, and the permit filing where the city requires one. It typically does not cover survey work, private utility locating beyond the free 811 markout, landscape repair where we had to pull plants, or privacy slats if you haven’t chosen them yet. Upfront pricing, no surprises – the number you sign is the number you pay. If you’re redoing the driveway approach at the same time, homeowners often pair this with Concrete Driveways & Concrete Work in Cerritos to keep the mess to one job.
See the difference
Before
After
Before
After
Before
AfterWhat Cerritos Homes Specifically Do to This Job
Cerritos is a master-planned, fully built-out city. Nearly every lot was developed between the late 1960s and 1990s under strict planned-unit-development standards, which means there’s essentially no vacant ground here – we’re almost always replacing fencing on a 40- to 55-year-old tract lot, and often working around original stucco walls and settled soil from that era. That combination of uniform-era housing and tight city oversight is what separates a Cerritos job from one in neighboring Norwalk. In the tracts around the 605/91 interchange, exterior work frequently runs through architectural review, and a fence that doesn’t match the community’s existing height and color gets flagged. We assemble the submittal around the original tract palette so it clears the first time. The dry Santa Ana wind events also stress fencing: we regularly see wind-bent top rails and loosened post footings on older galvanized runs heading into fall, which is why we spec heavier terminal footings here than we would inland. Hot, dry summers also bake vinyl coating, so we factor that into the material conversation. We cover all of Cerritos, ZIP 90703 included.
Serving Cerritos, CA – Our Local Coverage Area
We serve Cerritos and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Cerritos

Most residential chain link fences take about two working days once material is on site. If your property requires city permit filing or HOA architectural review, add five to fifteen business days before we start. Call (888) 255-8179 and we’ll give you a real schedule for your lot.
It depends on your property – some Cerritos parcels need a city fence permit, and homes in planned developments often need architectural review approval before installation. We check the requirements for your address and assemble the submittal for you. Call (888) 255-8179 to confirm what your lot needs.
Residential chain link in Cerritos runs about $3,500 to $9,000, driven by linear footage, gates, material grade, and whether permit or design review is involved. A written line-item estimate before any work starts locks the number in. Call (888) 255-8179 – estimates are free.
Yes – matching height, post spacing, fabric color, and gate style to the existing community standard is standard practice here, and it’s usually what gets an architectural submittal approved the first time. If you’re extending an existing run, we can also blend new panels with sound existing sections. Call (888) 255-8179 and we’ll walk the line with you.
Every chain link fence we install is backed by the 730-Day Done Right Promise – if a post settles, a gate sags, or the work isn’t right, we come back and make it right. Estimates are free and calls are answered by a live person 24/7. Call (888) 255-8179 to get started.
Get a Free Chain Link Fence Estimate in Cerritos
We’ll come out, measure the run, check your property line, and tell you exactly what the fence will cost and what your community’s review process requires – no pressure, no vague bids. Most estimates are booked within a few days. Call (888) 255-8179 and a live person will set it up, any hour of the day. Whether your fence is a simple backyard run or part of a full Fence Installation in Cerritos project, our Fence Installation team can price it, and if the driveway needs attention in the same project, Asphalt Driveways & Resurfacing in Cerritos is a natural pairing.
Written by the team at Groundwork Construction Co.












