







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in East Whittier, CA: What It Costs and How Long It Takes
A chain link fence in East Whittier typically runs $3,500 – $9,000, and most residential jobs are finished in one to three days once materials are on site. That range covers a standard 4-foot or 5-foot galvanized run with posts set in concrete, one walk gate, and clean haul-away of the old fence. Taller runs, double gates, and vinyl-coated mesh push toward the top of it. Call (888) 255-8179 to schedule a free on-site estimate.
How We Build a Chain Link Fence Here, Stage by Stage

The sequence matters more than people expect, especially on East Whittier lots where the fence line shares a property line with a neighbor and sometimes sits over an old concrete mow strip. Here’s what actually happens.
Stage 1: Walk the line and verify the boundary (30 – 45 minutes)
We meet you on site, walk the proposed fence run, and confirm where the property line sits. On 1950s and 1960s tract lots, the line is often marked by an old stub or an existing fence footer that doesn’t match the plat. If there’s any doubt, we flag it before we dig. You decide the height, the gate placement, and whether the fence replaces the existing one or runs inside it.
Stage 2: Utility locate and layout (day 1, 1 – 3 hours)
Before a single post hole is dug, we call for the free utility locate and mark the run. This is the stage that saves money. East Whittier yards frequently have irrigation lines, old gas stubs from converted garages, and low-voltage landscape wiring buried within a foot of the surface. After marking, we set string line and stake every post location so you can see the fence before we build it.
Stage 3: Demo and post setting (day 1, 4 – 6 hours)
We pull the old fence and posts, haul it off, and dig new holes 24 to 36 inches deep depending on soil and wind exposure. Posts get set in concrete and need 24 to 48 hours to cure. That’s the one part of the job you can’t rush. On a Santa Ana wind week, we set deeper and add concrete; those gusts will lean a shallow post set within a season.
Stage 4: Framework and mesh (day 3, 3 – 5 hours)
Top rail, tension wire, and mesh go up after the concrete cures. We tension the fabric by pulling from the terminal posts, which is why end and corner posts get larger pipe and deeper footings than line posts. Gate frames get welded or factory-crimped corners depending on the gate you chose.
Stage 5: Gates, walkthrough, and cleanup (day 3, 1 – 2 hours)
We hang gates, check swing and latch alignment, walk the run with you, and clean the site. You get the written guarantee paperwork at the walkthrough. Our technicians have up to 12 years of experience setting posts in this soil, and the 730-Day Done Right Promise backs the installation in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before We Order Materials
Chain link is a simple product, and most of the cost swing comes from three or four decisions you make up front. Here’s the honest version of each.
- Height: 4-foot, 5-foot, or 6-foot. 4-foot is the cheapest and meets most residential code for a side or back lot line. 6-foot is what people choose for a dog run or pool barrier. Height adds roughly 10 – 15% per step up in material and labor.
- Mesh gauge: 11.5 vs. 9. 11.5-gauge is the standard residential fabric and holds up fine in a yard. 9-gauge is noticeably heavier and resists bending from dogs and balls; it adds cost but lasts longer against the kind of abuse a family yard takes.
- Finish: galvanized vs. vinyl-coated. Bare galvanized is the value choice and weathers to a dull gray in the LA basin sun. Vinyl-coated (usually black or green) hides the industrial look and blends into landscaping; it costs more and the coating can chip at cut edges over time. For a front-yard run, most East Whittier homeowners pick vinyl-coated black.
- Gates: walk gate vs. drive gate. A standard 3- or 4-foot walk gate is included in most base quotes. A double drive gate for a side yard or RV access adds real cost because it needs heavier posts and bracing.
- Top rail and tension wire. A top rail keeps the fabric from sagging; a bottom tension wire keeps animals from pushing under. Both are worth having and neither adds much to the total.
What a Chain Link Fence Costs in East Whittier, CA

Expect $3,500 – $9,000 for a residential chain link fence in East Whittier. Here’s how the number moves.
| Scope | Typical Range |
|---|---|
| Standard residential run, 4 – 5 ft, galvanized, one walk gate | $3,500 – $5,500 |
| 6-ft run, 9-gauge mesh, vinyl-coated, one walk gate | $5,500 – $7,500 |
| Add a double drive gate with heavier posts and bracing | $800 – $1,800 additional |
| Remove and haul off an existing fence | $300 – $800 additional |
| Rock, root, or old concrete footer removal along the run | $200 – $900 additional |
What pushes a job to the high end: a long perimeter, rocky or root-choked soil, an old fence set in concrete that has to come out, and tight side-yard access where equipment can’t reach. What keeps it low: a clean, straight run with easy access and an existing fence you want left in place. A written estimate from us itemizes posts, mesh, gates, concrete, demo, and haul-away line by line. The number you see is the number you pay, and a change order only happens if you ask for one. Our fence installation team handles the same written pricing across every material.
See the difference
Before
After
Before
After
Before
AfterWhat East Whittier’s Housing Stock Means for Your Fence
East Whittier is built out. Nearly every job here is a replacement or an addition on a 1950s or 1960s single-story stucco tract home, not new construction, and that changes the fence work in specific ways. The old fences on these lots were often set decades ago, sometimes on an unpermitted line or over a shared concrete mow strip, so we spend real time confirming the boundary before we dig. Side yards are narrow on these lots, which rules out a skid-steer for hauling and means a lot of the demo goes out by hand.
Permitting is the other factor. Whittier’s residential permit review is strict, and a fence over a certain height or one on a corner lot often needs a permit and an inspection before it’s legal. Pulling a permit here also has a way of turning up earlier unpermitted work, especially around converted garages, so we look at the fence line with that in mind. On the climate side, hot dry summers dry out and shrink the soil, and Santa Ana wind events put real lateral load on a fence run; that’s why we set posts deeper on exposed runs and add concrete on corner and terminal posts. Winter rain can delay the dig by a day or two. If your project grows into a full exterior redo, it becomes part of a Fence Installation in East Whittier, and homeowners often pair a new fence with Concrete Driveways & Concrete Work in East Whittier or Asphalt Driveways & Resurfacing in East Whittier while the equipment is already on site. We cover the full East Whittier area for all of it.
Serving East Whittier, CA – Our Local Coverage Area
We serve East Whittier and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in East Whittier

Most residential chain link fences are finished in one to three days, with one day for demo and post setting and a return visit after the concrete cures. A long perimeter or a job with heavy demo can stretch to four days. Call (888) 255-8179 for an exact timeline on your lot.
Often yes, depending on height and lot position. Whittier’s residential permit review is strict, and a fence above the standard residential height or one on a corner lot generally triggers a permit and an inspection. We check the requirement for your address during the estimate and pull the permit for you. Call (888) 255-8179 to find out what your property needs.
Yes. We set posts individually rather than trenching a continuous line, so the damage stays limited to the post holes and a narrow work strip. On narrow East Whittier side yards we do the demo and haul-off by hand to protect existing plantings. Call (888) 255-8179 to walk your layout.
Most residential chain link fences here run $3,500 – $9,000, with the high end driven by length, height, gate count, and how much old fence and concrete has to come out. Call (888) 255-8179 for an exact quote; estimates are free.
Every chain link fence we install is covered by the 730-Day Done Right Promise: if something isn’t done right, we make it right, in writing, for two years. Post setting, tension, and gate alignment are all covered. Call (888) 255-8179 to review the guarantee at your estimate.
Get Your Chain Link Fence Estimate
Call (888) 255-8179 for a free on-site estimate on your chain link fence in East Whittier. A live person answers around the clock, so you won’t land in voicemail. On the visit we confirm the property line, mark the run, and hand you a written line-item price with gates, demo, and haul-away spelled out. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.












