







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Whittier, CA: What It Costs and How Long It Takes
A chain link fence in Whittier, CA typically runs $3,500 to $9,000 for a standard residential lot, with most jobs finished in one to two days once materials are on site. That covers posts set in concrete, framework, chain link mesh, and at least one walk gate. The number moves with linear footage, height, gauge, and terrain. Call (888) 255-8179 and we’ll walk your property line and put a written, line-item price in front of you.
How a Chain Link Fence Goes Up: The Five Stages

Chain link is one of the few fencing jobs where the sequence is genuinely predictable. Here’s what actually happens, and where your decisions land along the way.
Stage 1: Property line and utility check (first visit)
Before anyone swings a shovel, we locate the property corners and call for utility marking. Digging into a gas or electrical line is the one mistake that turns a two-day job into a two-week one, so this step is not optional. You’ll need to have your plat map or survey handy if you have one. If you don’t, we’ll work from existing corner markers. This visit usually takes under an hour.
Stage 2: Layout and homeowner sign-off (same day)
We stretch a string line along the proposed fence run and mark every post location with paint. This is your decision point: exact line placement, gate locations, and whether the fence sits on the line or a foot inside it. A fence on the property line means shared maintenance; an inset fence puts full ownership on you. Walking the string line together takes 20 minutes and saves arguments later.
Stage 3: Demo and post setting (day one)
Old fencing and debris come out first, then posts go in. We set terminal posts (corners, ends, gates) deeper and in larger concrete footings than line posts because they carry the tension of the whole run. Concrete cures before tension gets applied. A typical 150-foot residential run has all posts set in a single day.
Stage 4: Framework and mesh (day two)
Top rail, tension wire, and chain link mesh go up on the second day. Stretching the mesh correctly is what keeps it from sagging within a season – it’s the difference between a taut fence and one that looks tired at year three. Gates get hung and adjusted last so they swing clean against the post.
Stage 5: Walkthrough and final tension check
We walk the line with you, test gate swing and latch, check post plumb, and confirm nothing is leaning. Any adjustment happens on the spot. This final pass is short, but skipping it is how homeowners end up making their own callbacks three weeks later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Chain link isn’t a single product. The choices below are the ones that actually change how the fence looks and lasts.
- Gauge of wire: 11.5-gauge is the common residential standard. 9-gauge is noticeably heavier and resists bending from dogs and kids, but costs more per foot and takes longer to stretch. For most Whittier yards running along a side yard, 11.5 is fine; if the fence runs along a dog run or a busy sidewalk, step up.
- Height: 4 feet reads as decorative and open, 5 feet is the standard residential height, and 6 feet adds privacy and security. Anything over 6 feet in a residential zone may need a permit, so height is also a permitting decision.
- Coating and finish: Galvanized steel is the baseline and holds up well in dry heat. Vinyl-coated chain link in black or green blends into landscaping much better and avoids the “chain link prison” look – it adds cost but is the pick when the fence is visible from the street or a patio.
- Top rail and tension wire: A top rail gives structure and a cleaner line. A tension wire bottom (instead of a bottom rail) is the more common, less expensive option and lets the fence follow grade without gaps.
- Gates: Single walk gates are standard. Drive gates and double gates cost more and need heavier posts and hinges, so decide gate placement early, not after posts are set.
- Post setting: Concrete-set posts last decades. Driven posts are faster and cheaper but don’t hold up in Whittier’s soil and heat the same way.
What Chain Link Fence Costs in Whittier, CA

Plan on $3,500 to $9,000 for a residential chain link fence in Whittier. A short 4-foot run on flat ground sits at the bottom of that range; a full perimeter at 6 feet with a drive gate and vinyl coating lands near the top.
| Item | Typical Whittier range |
|---|---|
| Standard residential run (approx. 100-150 ft, 5 ft, galvanized) | $3,500 – $5,500 |
| Larger perimeter or 6 ft height | $5,500 – $7,500 |
| Vinyl-coated finish | adds roughly 15-25% |
| Walk gate (single) | $250 – $600 |
| Drive or double gate | $700 – $1,800 |
What pushes a job to the high end: total linear footage, fence height, a sloped or rocky run that needs extra posts or hand digging, gate count, and old fence removal. What keeps it low: a short flat run, standard galvanized mesh, and a single walk gate. A written estimate lists footage, gauge, height, coating, gate count, concrete, and haul-away line by line. What it typically doesn’t include is grading or retaining work if the ground won’t hold a post – we’ll flag that on site rather than surprise you mid-job. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Whittier Homes Specifically Do to This Chain Link Fence Job
Whittier’s housing splits into two very different realities, and that changes what a fence job looks like from block to block. Near Uptown in 90601, many lots sit behind 1920s Craftsman bungalows and Spanish Colonial homes inside the city’s historic overlay, where fencing along a visible frontage can pull in a design-review permit and add weeks. Out in the eastern tracts, the mid-century ranches that dominate 90604 and 90606 sit on slab-on-grade lots with long side yards – simpler to fence, but often on soil that runs rocky toward the Puente Hills foothills, which means hand digging and extra concrete in places. The semi-arid basin heat and Santa Ana wind episodes dry out and shift ground, so posts set shallow will lean within a season. That’s why we set every post in concrete and check plumb at the walkthrough. Homeowners here often pair perimeter fencing with a resurfaced path or apron, so it’s common to talk through Concrete Driveways & Concrete Work in Whittier or Asphalt Driveways & Resurfacing in Whittier in the same visit. We cover 90601, 90604, 90606, and 90612 as part of our work across Whittier.
Serving Whittier, CA – Our Local Coverage Area
We serve Whittier and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Whittier

Most residential chain link fences in Whittier take one to two days on site, with permits and utility marking adding a few days before work starts. Flat yards with clear access move fastest; rocky or sloped runs take longer. Call (888) 255-8179 to get a realistic window for your property.
A residential chain link fence at 6 feet or under usually doesn’t require a building permit, though corner-lot sight lines and historic-overlay frontages can trigger review. We check the specific rules for your block before we order materials. Call (888) 255-8179 and we’ll tell you what applies to your address.
Expect $3,500 to $9,000 for a residential chain link fence in Whittier, depending on footage, height, gauge, coating, and gates. A written, line-item estimate shows exactly where the money goes. Call (888) 255-8179 for a free on-site quote.
Yes, in most cases we route posts around irrigation, utility lines, and existing plantings. Utility marking before digging keeps it safe. If a post location conflicts with something buried, we flag it and adjust before setting concrete. Call (888) 255-8179 to talk through your yard.
Every chain link fence we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on posts, framing, tension, and gates for two full years. Call (888) 255-8179 for details on your project.
Get a Free Chain Link Fence Estimate in Whittier
We’ll walk your property line, confirm footage, gauge, height, and gate locations, and hand you a written line-item estimate at no cost – then tell you honestly whether the run needs a permit or any ground prep. Calls are answered by a live person, 24/7. Reach us at (888) 255-8179 for your free estimate, and you’ll know exactly what your Fence Installation in Whittier project costs before anyone orders a single post. This is one part of Fence Installation we handle; our technicians bring up to 12 years of experience to every run.
Written by the team at Groundwork Construction Co.












