







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Artesia, CA: Scope, Timeline and Cost
Custom & geometric windows in Artesia, CA usually run $4,500 – $15,000 for a typical project, and a full replacement set that includes true arch-tops, radius or angled units typically lands in the $8,000 – $25,000 band once you factor in templating, custom fabrication lead time and the framing work older homes need. Most jobs here take 4 – 8 weeks from signed estimate to final inspection because the geometric units are built to order. Call (888) 255-8179 to schedule a free on-site estimate.
How Groundwork handles Custom & Geometric Windows, step by step

Every geometric window is a one-off piece of glass, and the sequence matters more than it does on a standard double-hung swap. Here’s how we run it.
Step 1: In-home measure and template (day 1, about 60 – 90 minutes)
We measure the rough opening, check for out-of-square framing (common in Artesia’s 1950s and 1960s tract homes), and photograph every jamb. True arches and angles get a physical template, not just a tape measurement. At this stage you’ll pick shape and glazing options, since the shape drives fabrication cost more than size does.
Step 2: Written line-item proposal (2 – 3 business days)
You get a fixed price per opening, the factory lead time, and a clear note on whether a permit is required. Any unpermitted enclosure or converted garage triggering a plan-check issue gets flagged now, before you commit.
Step 3: Permits and fabrication (3 – 6 weeks, the long stage)
Custom and geometric units are built to order. During this window we pull the permit and schedule the framing inspection. If your home is pre-1978, we plan lead-safe handling before any demo starts.
Step 4: Demo, framing and install (1 – 3 days per opening)
We cut back to sound framing, correct any rot or water damage, flash the rough opening, set the unit true, then insulate and seal. The framing around angled or arched windows takes longer than a rectangle, and we don’t rush the flashing.
Step 5: Trim, seal, inspection and walkthrough (1 – 2 days)
Interior trim, exterior sealant, and the final inspection. You walk the openings with us, confirm the operation of every unit, and get your 730-Day Done Right Promise paperwork in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for Custom & Geometric Windows
Shape, material and glazing are the three decisions that change both the look and the price. Here’s the honest trade-off on each.
- Wood-clad or aluminum-clad units (Andersen, Marvin): the best fit for arches and true half-rounds. Stable in our mild climate, paintable or factory-finished, and the most expensive option. Suits homes where the geometric window is a design focal point.
- Fiberglass: holds detail well on angled shapes, resists moisture, and lands mid-range. A solid middle path if you want durability without the clad price tag.
- Vinyl: the budget choice. Limited on true radius and arch shapes (some shapes are faked with a rectangular frame and applied trim), so it suits angled but not highly curved openings.
- Glazing: standard double-pane with a low-E coating is fine for most Artesia homes. Tempered glass is required where a unit comes close to a floor or door; adding it early avoids a re-order.
- Finish and hardware: interior trim and exterior color are where a lot of the visual payoff lives for little added cost. Bronze and Matte Black finishes stay popular here.
What Custom & Geometric Windows cost in Artesia, CA

Expect $4,500 – $15,000 on a standard project; add arches, true radius units or multiple Angled openings and the number climbs toward $25,000. Below is where the money goes.
| Line item | Typical range |
|---|---|
| Standard replacement window (per opening) | $550 – $1,500 |
| Custom geometric or arched unit (per opening) | $1,200 – $4,500 |
| Templating and fabrication premium | $300 – $900 per custom shape |
| Framing correction or rot repair | $400 – $1,800 |
| Permit and inspection | $250 – $800 |
| Project total | $4,500 – $25,000 |
Five variables push a job to the low or high end: the number of openings; how many are true custom shapes versus simple rectangles; existing framing condition; whether you’re changing size and need structural work; and material grade. A written estimate from us itemizes each opening, the fabrication premium, permit costs and any framing allowance. What it typically does not include unless listed: painting, drywall patching beyond the opening, and structural changes. Upfront pricing, no surprises – the number you see is the number you pay, backed by 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Artesia homes specifically do to Custom & Geometric Windows
Artesia’s housing stock is dominated by 1950s and 1960s single-story tract homes on small parcels, and that changes how a geometric window job runs here. Tight lots make exterior access tricky, so staging material and getting a ladder to the right elevation takes planning. Older homes here often have later additions or enclosed patios built without permits, and we regularly find rough openings that don’t match the drawings the homeowner was handed. This is where the city’s strict plan-check culture surfaces: any added or altered opening needs to reconcile with what’s actually permitted, and pre-1978 homes bring lead-safe handling requirements into the demo stage. Mild, mostly dry weather works in our favor, but intense winter rain bursts expose flashings that were never right. We cover both ZIP codes, 90701 and 90702, and work across Artesia to correct those problems at the same time we install. It’s rare for a geometric window job here to be purely cosmetic.
Serving Artesia, CA – Our Local Coverage Area
We serve Artesia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Artesia

Most of the timeline is fabrication: custom geometric units are built to order and typically carry a 3 – 6 week lead time. Actual installation runs 1 – 3 days per opening once the units arrive. Total project time from signed estimate to final inspection is usually 4 – 8 weeks. Call (888) 255-8179 for an exact lead time on your shapes.
Yes, in most cases. Changing the size or number of window openings, or adding a new one, requires a permit and inspection in Artesia, and the city’s plan-check is strict. We pull the permit and coordinate inspections as part of the project. Call (888) 255-8179 and we’ll tell you exactly what’s required for your home.
Often, yes. If the rough opening matches the smallest dimension of the new unit, a custom shape can fit the existing frame. But if the opening is out of square, a common issue in older Artesia homes, we correct the framing first. We’ll confirm this during the on-site measure. Call (888) 255-8179 for a free estimate.
Most single custom geometric units run $1,200 – $4,500 depending on shape, size and material, with a fabrication premium of $300 – $900 per custom shape. Framing and permit costs sit on top. Call (888) 255-8179 for an itemized written quote.
Every project is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. Manufacturer warranties on the glass and frame come on top, and our technicians have up to 12 years of experience. Call (888) 255-8179 to review the details.
Get a free estimate on Custom & Geometric Windows in Artesia
Call (888) 255-8179 for a free on-site estimate. We’ll measure every opening, confirm what shape and material fit your budget, itemize the cost, and tell you in plain terms whether a permit or framing work is needed. When it’s part of a full Windows & Doors in Artesia project, we scope the whole thing in one written quote. If the job grows, homeowners often pair this with Concrete Driveways & Concrete Work in Artesia or fresh Asphalt Driveways & Resurfacing in Artesia while the crew is out. Explore our Windows & Doors service for the full picture. Live person, 24/7. Estimates are free.
Written by the team at Groundwork Construction Co.












