







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Lakewood, CA: What They Cost and How the Job Runs
Custom & geometric windows in Lakewood run $6,500 – $22,000 for a typical multi-opening job, and most single-story tract homes are done in 8 – 15 working days from template to final inspection. You’re paying for shapes that don’t come off a shelf (arches, half-rounds, trapezoids, angled corner units) plus the framing, flashing and stucco work that has to be rebuilt around them. Call (888) 255-8179 for a free on-site estimate with a written line-item quote.
How We Run a Custom & Geometric Window Job, Stage by Stage

These windows are made to order, so the calendar matters as much as the install. Here’s the real sequence, including where you have to make decisions.
Stage 1 – On-site measure and template (day 1, about 2 hours). We measure every rough opening, check wall thickness and stucco depth, and photograph the existing framing. On a Lakewood 1950s tract home this is where we find out whether the wall is plumb, because mid-century slab construction rarely is. You decide window style, operating type, glass package and interior trim before we leave.
Stage 2 – Order and submittal (days 2 – 5 of shop time). Custom shapes go into production. This is the long lead: half-rounds and arches typically run 4 – 6 weeks; standard rectangles inside the same order run 2 – 3 weeks. You sign off on a final spec sheet and glass selection. If the home is in an HOA, this is when we assemble the submittal packet.
Stage 3 – Permit and pre-inspection (1 – 2 weeks, overlapping production). Window replacement that changes the opening size or configuration needs a permit. Angle cuts and structural headers on geometric units nearly always do. We pull it, and the inspector sees the framing before anything is closed up.
Stage 4 – Demo and framing (day 1 – 2 on site). Old units come out, the rough opening gets squared and any rot in the 2x framing is replaced. Geometric openings get a built header and a plywood template cut to the window’s actual curve. We set the window, flash the sill and head, and leave the stucco tie-in staged.
Stage 5 – Stucco, trim and final inspection (day 3 – 5 on site). New stucco is patched and feathered into the existing wall, the interior trim is set, and the inspector signs off. You get a walkthrough and the 730-Day Done Right Promise in writing. Total on-site time for a four-to-six opening job is usually 4 – 6 days.
Because Lakewood’s tract homes share framing plans block to block, the structural solution we work out on your house usually carries straight to the neighbor’s, which shaves design time off repeat shapes on the same street.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Custom and geometric windows aren’t one product. Here’s the honest trade-off on each decision:
- Frame material – vinyl vs. wood-clad aluminum. Vinyl handles the marine layer well and holds up against moisture cycling, but it can’t do tight radius curves and its color range is narrow. Clad aluminum and clad wood can form a true arch or eyebrow, cost 25 – 40% more, and last longer on south-facing walls taking Santa Ana heat.
- Glass package. Double-pane low-E is standard now. For geometric shapes facing west, we push a slightly higher solar gain rating; you’ll feel the difference in July. Triple-pane rarely pays back in the LA Basin.
- Fixed vs. operable. Most geometric units (half-rounds, transoms, eyebrow windows) are fixed, which keeps cost down. If you want an arched operable casement, expect a 30% premium and a longer lead time.
- Interior finish. Paint-grade pine trim is the value pick; stain-grade oak or a modern flush reveal costs more and suits the mid-century look better. Hardware like a Kohler or Delta lever-handle set is a small line item but the one you touch every day, so pick it deliberately.
- Grille pattern and muntins. A simple prairie or colonial grille references the 1950s tract face; skip it for a cleaner modern read. This is a taste call, not a quality one.
What Custom & Geometric Windows Cost in Lakewood, CA

Expect $6,500 – $22,000 for a custom and geometric window package on a Lakewood home, with the middle of that range landing around $12,000 for four to six openings including one or two shapes. Here’s what moves the number up or down:
| Line item | Typical range |
|---|---|
| Standard custom rectangle (per opening, installed) | $900 – $1,800 |
| Arched or half-round unit (per opening) | $1,400 – $3,200 |
| Trapezoid or angled corner unit | $1,600 – $3,500 |
| Stucco repair and tie-in (per wall) | $600 – $2,200 |
| Framing and header work | $800 – $3,000 |
| Permit and inspection | $350 – $900 |
The five variables that push a job to the high end: (1) how many true shapes versus rectangles, since every curve is a custom template; (2) hidden rot in the 1950s framing once the wall opens; (3) whether you relocate an opening, which means new structure and stucco; (4) glass and frame grade; (5) permit scope if the job crosses into a larger remodel. A written estimate from us lists material, labor, permit and stucco line by line. It does not include unexpected structural repair, which we quote separately once we see it, or interior drywall painting beyond the trim line.
See the difference
Before
After
Before
After
Before
AfterWhat Lakewood Homes Specifically Do to This Job
Nearly every home we touch in Lakewood went up between 1950 and 1955, part of one of America’s first planned communities. That means wood frame over stucco, slab-on-grade, no basement, and original single-pane windows in openings that were sized to a 1950s standard, not today’s. The result is that a custom geometric window is almost always a retrofit into a wall that wasn’t designed for it: the opening has to be re-squared, the header built, and the stucco patched to match a street face that the whole block shares. The marine layer and the dry Santa Ana wind events work on that old framing year after year, so we check for moisture damage and dry rot at every opening before we order anything. Something homeowners often pair this with while the walls are already open is Concrete Driveways & Concrete Work in Lakewood, since driveway work in the 90712 and 90715 ZIP codes often goes in the same season. Permits go through the city, and HOA design review applies in the planned tracts, so the submittal packet matters. This is part of a full Windows & Doors in Lakewood scope when it sits inside a bigger exterior job.
Serving Lakewood, CA – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Lakewood

Plan on 8 – 15 working days from order to final inspection, with 4 – 6 of those days actually on site. The rest is production and permitting, and arched or custom shapes add the most time.
Yes, if the job changes the opening size, adds a geometric shape, or alters framing. Straight like-for-like swaps in the same opening sometimes don’t require one, but we confirm with the city before scheduling. We pull it and pass the inspection; you don’t chase paperwork.
Usually, yes. Most geometric windows go into an existing wall without touching plumbing or major structure, though angled and arched units often need a new header. Anything that requires structural change gets quoted separately before we start.
Typically $6,500 – $22,000 for a full package, driven by shape count, framing condition and glass grade. Call (888) 255-8179 for an exact quote on your openings – the estimate is free.
Our labor is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Manufacturer glass and frame warranties pass through to you, and we hand over the paperwork at the walkthrough.
Get a Free Estimate on Custom & Geometric Windows in Lakewood
We’ll come measure your openings, look at the framing and stucco, and hand you a written line-item estimate for custom & geometric windows in Lakewood at no charge. Calls are answered by a live person 24/7, so you can book an on-site visit at whatever hour fits your day. Ask about the $1,000 off projects over $10,000 and 0% financing for 18 months. Call (888) 255-8179 to schedule your free estimate. If your project also touches the drive, see our Asphalt Driveways & Resurfacing in Lakewood work and our Windows & Doors service, and check the full Lakewood coverage area.
Written by the team at Groundwork Construction Co.












