







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterImpact French Doors Cost in Downey, CA: What the Price Really Includes
Impact French door installation in Downey runs $4,500 to $11,500 per opening, and the number that surprises most homeowners is the rough-opening work: cutting through three-coat stucco over wire lath on a 1950s ranch wall typically adds $800 to $2,000 before the door ever arrives. A basic door unit and hardware alone can start near $1,200, but the wall has to be rebuilt to carry the wider, heavier impact-rated frame. Call Groundwork Construction Co. of Downey at (888) 255-8179 for a free estimate – a live person answers, 24/7, and upfront pricing means the number you see is the number you pay.

Why a Simple Door Swap Turns Into Wall Work in Downey
Downey was largely built out in the 1940s through 1960s as a tight, inner-ring suburb of single-story ranch and Spanish-eclectic tract homes. Those walls weren’t framed for a 6-foot-wide impact French door – the original headers are undersized for the load, and the openings were sized for a standard sliding glass door or a small swing unit.
The local exterior is almost always three-coat stucco over wire lath on wood framing. Cutting a wider opening means scoring and removing stucco, reframing the header, sometimes adding a jack stud or a post at the hinge side, then patching and color-matching the exterior finish so it doesn’t read as a repair. That patching and recolor is its own line item, and most national cost guides leave it out entirely.
On top of that, this is remodel and addition territory, not new construction. Contractors working the older tracts near Furman Park routinely find shallow stem-wall foundations and original cast-iron drains once a permit pulls the wall open. Shifting a threshold 6 inches outward can mean reworking the slab edge or stem wall beneath it. We scope that possibility into the estimate up front so it isn’t a surprise on day three. From foundation to finish line, one contractor owns the whole opening – framing, glazing, stucco, and the trim.
Impact French Doors Cost Breakdown for Downey
Here’s how the money actually splits on a rear-patio French door in Downey. These are installed ranges for the Southern California market, not national averages:
| Line Item | Typical Cost |
|---|---|
| Impact-rated French door unit (double, 6 ft) | $1,800-$4,500 |
| Hardware, hinges, multipoint lock, threshold | $300-$900 |
| Rough-opening modification (reframe header, jack studs) | $800-$2,000 |
| Stucco cut, patch, and recolor match | $600-$1,600 |
| Installation labor and flashing/waterproofing | $900-$2,200 |
| Permit and plan-check (Downey building department) | $250-$700 |
| Total installed, per opening | $4,500-$11,500 |
The swing between the low and high end comes down to two things: whether the existing header can stay, and whether the stucco match is a straightforward recolor or a full re-stucco of the wall plane. On a rear ADU addition, you’re often tying a new door into a wall that was never finished to match the original house – that’s where the number climbs.
For larger remodels that include door and window packages, our Windows & Doors service covers the full scope, and impact window installation elsewhere on the same Downey home typically runs $8,000 to $25,000 depending on count and opening sizes.

Impact vs. Tempered Glazing: The Confusion That Sends Plans Back
Impact glazing and tempered glazing are not the same thing, and mixing them up is the most common reason a French door plan check gets bounced in Downey.
- Impact glazing is laminated glass built to resist windborne debris and wind pressure. It carries a product-approval listing and a spec sheet that shows its design pressure rating.
- Tempered glazing is heat-treated safety glass. It breaks into small pieces instead of shards, but it does no debris-resisting work on its own.
California Building Code requires safety glazing – tempered or laminated – on doors and adjacent sidelights, and a French door opening onto a hardscaped rear patio is exactly the layout that triggers the requirement. Downey’s building department wants to see the product listing before it signs off. When the door is compliant, the plan check moves. When it isn’t, you lose weeks.
That’s why we install Andersen and Marvin impact-rated French door lines, both of which carry documented performance certifications. You can request the spec sheet before the permit is submitted and hand it to the plan checker with the application. Built to last, backed in writing – and backable on paper.
Common Local Scenarios We Price Every Week
Three real patterns show up over and over on Downey French door jobs:
- Rear patio door on a 1958 ranch near Furman Park. Original wall has a 5-foot sliding door. Owner wants a 6-foot impact French door. Header replacement, stucco patch, recolor – lands near the middle of the range.
- ADU rear extension. New door goes into a freshly framed wall, so there’s no stucco cut, but the ADU permit often runs alongside foundation and lateral-force upgrades. The door cost is clean; the surrounding scope isn’t. Full ADU builds typically run $90,000 to $220,000, and door glazing is a line in that budget.
- Second-story or rear addition tie-in. Matching a new door opening to an existing stucco plane, where color-matching the finish becomes its own sub-project. Home additions here run $45,000 to $130,000, and door specs need to be locked before framing, not after.
An operator detail worth knowing: on the older tracts, we open the wall and check the framing before we order the door. Ordering first and discovering a rotten header second is how a two-week job turns into a six-week one. Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform.
FAQs About Impact French Doors in Downey
Impact French doors cost $4,500 to $11,500 installed per opening in Downey, including the door unit, hardware, rough-opening work, stucco patch and recolor, labor, and permit. The rough-opening modification alone typically adds $800 to $2,000 on older stucco ranch walls. Call (888) 255-8179 for an exact quote – estimates are free.
Yes. Replacing or enlarging a door opening in an exterior wall requires a permit and plan check through Downey’s building department. The plan checker will want the impact rating certification for the glazing, which is why we supply the spec sheet before submitting the application. Call (888) 255-8179 and we’ll walk you through the permit path for your address.
Repair is usually cheaper when the frame and wall are sound – a hinge, lock, or glass-only swap typically runs well under $1,000. Replacement makes more sense once the header is undersized or the door is a non-impact unit that won’t pass plan check. Call (888) 255-8179 and we’ll tell you honestly which side of that line your door falls on. For broader replacement scope, window replacement in Downey runs $4,500 to $15,000.
Yes. Calls are answered by a live person 24 hours a day, 7 days a week, so a Saturday framing discovery doesn’t sit until Monday morning. That matters on a tight Downey lot where a stalled opening halts the whole rear-patio timeline. Call (888) 255-8179 when the wall comes open and we’ll take a look.
Get a Straight Number on Your French Door
Impact French door pricing in Downey is really a question about your specific wall – the header, the stucco, and the framing behind it. Groundwork Construction Co. of Downey gives you upfront pricing, no surprises, and backs every install with the 730-Day Done Right Promise. Projects over $10,000 get $1,000 off, and 0% financing for 18 months makes the upgrade easier to budget. Book a free project estimate and design consult at (888) 255-8179. We serve the whole Downey service area, so start here and we’ll set the walkthrough.
Written by the team at Groundwork Construction Co. of Downey, serving Downey, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma












