A Groundwork company - serving Downey, CA
A backyard with a new horizontal privacy fence
Iron Fence · Santa Fe Springs, CA

Iron Fence in Santa Fe Springs - Written Price Per Foot, Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Downey
A new front yard fence with a matching gate
A new black aluminum pool fence with a gate
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
A new paver pool deck
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Santa Fe Springs, CA: What It Costs and How Long It Takes

An iron fence in Santa Fe Springs typically runs $3,500 to $9,000 for a standard residential lot, and most jobs go from layout to final walkthrough in 4 to 7 working days after the material arrives. Wrought iron and welded steel are built to spec off-site, so expect a 2 to 4 week fabrication lead time before we ever dig a hole. Call (888) 255-8179 and we’ll walk your property line with you, measure the actual run, and put a fixed number in front of you before a single post is set. The $3,500 figure is a real fence, not a teaser.

Call (888) 255-8179

How We Build an Iron Fence: The Real Sequence

A new wood side gate with black hardware

Every stage below is a decision point for you, and skipping a decision early costs real money later.

Stage 1: Site walk and line layout (day 1, about 1 to 2 hours)

We walk the property with you and a tape measure, mark the run, and confirm where the fence lands relative to your lot line. If the run crosses a shared boundary, this is the moment to sort out who owns which section. We also check what’s underground before layout is final: irrigation lines, gas stubs, and old septic or utility trenches are common on 1950s ranch lots here, and a probe hits them cheaply compared to a shovel.

Stage 2: Design and material spec (days 1 to 3)

You choose the style, height, picket spacing, and finish. We measure the actual run in linear feet and show you the cost difference between a 4-foot decorative run and a 6-foot security run. Most Santa Fe Springs homeowners land on 5 or 6 feet for a backyard and 4 feet up front. You sign off on the spec, then we order the iron.

Stage 3: Fabrication (2 to 4 weeks)

The fence is cut, welded, and finished to your spec at a shop, not on your lawn. That means it arrives ready. Aluminum and steel take on different finishes at this stage, and this is where upgrade decisions actually get locked in.

Stage 4: Demo, digging, and setting posts (days 1 to 3 on site)

Old wood or chain link comes out first if you have it. Then we dig post holes to code depth, set the posts in concrete, and let them cure. Curing is not negotiable, and a crew that skips it is a crew that hands you a leaning fence in year two.

Stage 5: Rails, pickets, gates, and final walkthrough (days 3 to 7 on site)

Panels go up, gates get hung and adjusted, and we walk the whole line with you. Touch-up and alignment happen before we leave, not after your first call.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between: Materials, Finishes, and Gates

Iron fence means different things to different buyers. Here’s what actually changes the price and performance on your job.

  • Wrought iron vs. welded steel: Traditional wrought iron is genuine forged iron at the highest cost, while welded steel is the more common choice for residential iron fence and performs well in this climate. Steel is easier to source and typically lands lower.
  • Aluminum as the iron stand-in: Powder-coated aluminum looks like iron, won’t rust, and frequently fits the lower end of the daily price range. The trade-off: it dents easier than steel and feels lighter at the gate.
  • Picket spacing and height: A 6-foot fence with tight picket spacing heads toward the top of the range; a shorter decorative front run lands near the bottom.
  • Finish and coating: Powder coat is standard for aluminum, while steel benefits from a quality primer and topcoat. Matte black fits most homes here, but bronze and custom colors cost extra and take longer to cure.
  • Gate hardware and automation: Manual gates are standard. A gate that gets used daily needs heavier hinges and an adjustable latch, while gate automation sits outside the fence price and needs its own discussion.

What an Iron Fence Costs in Santa Fe Springs, CA

A remodeled family room with new windows and a window seat

Most iron fence jobs here land between $3,500 and $9,000. Here’s what moves the number.

  • Linear feet: The biggest driver. A standard 100-foot run heads toward the low end, and anything approaching 200 feet pushes the top.
  • Height and picket density: A taller, tighter fence uses more material and labor, and it climbs the range.
  • Material grade: Steel, aluminum, and genuine wrought iron carry different prices per foot, and the finish adds cost on top.
  • Gates: Gates cost more per foot than a straight run because of hardware and adjustment.
  • Site prep and existing fence removal: Old fence removal, old concrete footings, and rocky soil or old slab edges add time. A clean run with nothing in the way stays lower.

A written estimate should list the linear feet, the material, the finish, and the gate count line by line, so there’s no mystery when the invoice comes. If you’re redoing the whole yard at once, this often pairs with a Fence Installation in Santa Fe Springs project that covers the other fence lines on the property, and homeowners often plan hardscape at the same time. Landscaping, decks and paths, patios, and walkways often pair with a new fence line, and that’s where Patios, Walkways & Pool Decks in Santa Fe Springs comes into the conversation if you want the whole yard handled. Every job is backed by our 730-Day Done Right Promise, and the quote is upfront pricing with no surprises: the number you see is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Santa Fe Springs Homes Specifically Do to This Job

Santa Fe Springs is essentially an industrial and commercial job site with homes tucked alongside. The 1940s to 1970s tract housing sits immediately next to refineries, warehouses, and truck yards off the 5 and 605, and that mix changes how a fence gets built here. The 605/5 interchange and the rail yards leave a dusty, truck-traffic-heavy environment that ages exterior coatings faster than in quiet neighborhoods, so we spec a finish and primer that can take it. Most lots we work on are modest single-story ranches on small parcels built between the late 1940s and the 1970s, and years of additions mean the fence line rarely matches the plat map. We probe before we dig, because old irrigation and utility lines turn up more often than not. Zoning and design review also matter when a fence borders a commercial parcel, and the planning counter is where we sort that out before your material is ordered. That is also why the permit side of anything bigger than a fence is a conversation of its own, and it’s why homeowners here often work through ADU Design & Permitting in Santa Fe Springs when a project grows beyond the yard. We cover all of it across Santa Fe Springs.

Serving Santa Fe Springs, CA – Our Local Coverage Area

We serve Santa Fe Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked: Iron Fence in Santa Fe Springs

A standing-seam metal roof over a covered porch

Get an Iron Fence Estimate in Santa Fe Springs

Call (888) 255-8179 to schedule a free on-site estimate for iron fence in Santa Fe Springs. We’ll walk the property line, measure the run, and put together a written quote with the height, material, finish, and gate count spelled out line by line. You’ll get the same number we put in writing. No change orders, no surprises, and a live person answers the phone.

Written by the team at Groundwork Construction Co.

Why Santa Fe Springs Chooses Groundwork Construction Co. of Downey

We set the standard for iron fence in Santa Fe Springs.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Santa Fe Springs

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Santa Fe Springs Customers Say

Trusted by homeowners across Santa Fe Springs and surrounding areas.

★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett
★★★★★

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

Dev Sharma

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new casement window over a kitchen sinkNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porch

More services in Santa Fe Springs

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Downey

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Downey team

A local vetted partner works across Downey and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Iron Fence in Santa Fe Springs?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Santa Fe Springs.

(888) 255-8179

Request a Free Estimate in Santa Fe Springs

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch