







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Artesia, CA: What the Job Actually Costs and Takes
Patios, walkways and pool decks in Artesia, CA usually run $3,500 to $11,000 for a paver patio, with walkways and pool surrounds priced per square foot on top of that. A typical single patio takes 3 to 5 working days from demo to final joint sand. Call (888) 255-8179 for a free on-site estimate with a written line-item number before anything gets torn out.
How a Patio, Walkway or Pool Deck Comes Together, Stage by Stage

Most people only see the finished surface. The strength of the job lives in what’s underneath it, and in Artesia’s older lots that base work is where the schedule gets made or lost.
Stage 1 – Walkthrough and layout (day 1, 1 to 2 hours). We measure the actual space, check the slope of the yard, and find where water wants to go. You decide the shape, the material and the finished height relative to your doors and existing concrete. If there’s old patio slab, we talk about whether it’s staying as a base or coming out. This is also when we flag anything that looks like an old unpermitted addition touching the work zone.
Stage 2 – Demo and excavation (day 1 into day 2, 1 to 2 days). Old concrete, brick or overgrown soil comes out. We dig down far enough to hold a proper compacted base – usually 4 to 6 inches of crushed aggregate under a paver surface, more under a driveway-grade walkway. On a pool deck, this is also when we inspect the coping and the area where the deck meets the pool wall, because failing pool decks almost always fail at that seam.
Stage 3 – Base compaction and drainage (day 2 to day 3, 1 day). The base gets laid in lifts, watered and compacted with a plate compactor. We set fall away from the house at roughly a quarter inch per foot. If your yard holds water in winter, this is the stage where a drain line or a channel drain gets added. Skipping this is why patios settle and heave, and it’s the most common shortcut we’re called out to correct.
Stage 4 – Setting the surface (day 3 to day 4, 1 to 2 days). Pavers go down on a sand or, for heavier traffic, a mortar-set base depending on the product. Concrete gets formed, poured and finished, then cures. You’ve already chosen the material and pattern at Stage 1, so this day runs on the crew, not on decisions. Pool decks get the coping set and the surface worked around the water line.
Stage 5 – Joints, cleanup and final walk (last half day). Polymeric sand goes into the joints, the site gets cleaned, and we walk the finished surface together. You get the workmanship terms on paper and a clear picture of what to expect the first rainy season.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Concrete pavers (Techo-Bloc, Cambridge Pavers, Oldcastle). The most popular choice for patios and walkways in Artesia. Wide color and texture range, a joint that flexes with minor ground movement, and individual units you can lift and reset if something shifts. Runs toward the higher end of the price range but holds up best around tree roots and pool edges.
- Poured concrete. Lower cost and fewer seams to maintain, but it cracks. In a yard with mature trees or expansive soil, that crack risk climbs. Suits simple walkways and utility areas more than a showpiece pool deck.
- Stamped or colored concrete. A middle path – the look of stone or brick at a concrete price. Good for pool surrounds where a seamless surface matters. The trade-off is that a crack in a stamped slab is harder to hide than a crack in a paver field.
- Natural stone. The premium finish. Beautiful, heavier, slower to install, and pricier per square foot. Best for pool coping and focal areas rather than the whole yard.
- Base and joint materials. Crushed aggregate under everything, polymeric sand in the joints on pavers, Quikrete mixes where a concrete cap or setting bed is called for. These are the unglamorous choices that decide how the job looks in ten years.
Pattern matters too – a running bond reads calm and traditional, a herringbone or ashlar pattern adds movement and a bit of extra labor. We’ll lay out a sample area so you can see it at your own house, in your own light.
What Patios, Walkways & Pool Decks Costs in Artesia, CA

A paver patio installation in Artesia runs $3,500 to $11,000. Walkways and pool decks are priced per square foot on top of that, so a combined patio-and-walkway project often lands in the same range or a bit higher depending on total area.
Five things push a job toward the low or high end:
- Square footage. The single biggest lever. A 200 sq ft patio and a 500 sq ft pool surround are not the same job even with identical material.
- What has to come out. Tearing out an old slab, roots or a failing deck adds demo time and haul-away cost. A clean yard starts lower.
- Drainage correction. If the yard already floods in winter rain, adding a drain line and regrading is real money and real value. It’s the difference between a deck that lasts and one that shifts.
- Material grade. Concrete sits at the bottom, pavers in the middle, natural stone at the top. Brand and thickness move the number within each tier.
- Access and tight lots. Many Artesia properties have alley access or a narrow side yard. More trips with a wheelbarrow and less room for equipment equals more labor hours.
A written estimate from us lists the surface area, material, base depth, demo, haul-away, drainage work and the joint finish – no vague allowances. It doesn’t usually include relocating pool plumbing, electrical for lighting, or structural repairs to a pool wall discovered mid-job. If we find one of those, we stop and quote it in writing before we touch it. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Artesia Homes Specifically Do to This Job
Artesia is a small, dense city, and the lots here tell the story. Most of the housing stock is 1950s and 1960s single-story construction on tight parcels, and a lot of these homes have later additions or enclosed patios that were never permitted. That matters before a shovel hits the ground: when we walk a backyard in the 90701 and 90702 ZIP codes, we’re often checking whether a covered patio over the work zone is original or an add-on, because that changes how we tie a new deck into the existing structure. Strict plan-check at the city means we don’t wing it – if a patio cover or structural tie-in needs a permit, we pull it and get the inspection on the calendar.
The other local reality is water. Artesia sits in the mild, mostly dry LA coastal basin, but the winter rain bursts we get occasionally overwhelm older yard drainage and low-slope patio roofs. We correct grading and add drainage as a matter of course here, because the fast, heavy storms are what reveal a bad base. Tying a new walkway or deck into an older home often means pairing it with ADU Site Prep & Utilities in Artesia if you’re grading the same yard, and it’s frequently part of a full Driveway & Pavers in Artesia scope when the front approach is being redone at the same time. Homeowners often pair this with Full Kitchen Remodeling in Artesia so the backyard and the interior get finished in one coherent project.
Serving Artesia, CA – Our Local Coverage Area
We serve Artesia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Patios, Walkways & Pool Decks in Artesia

A typical single patio takes 3 to 5 working days, and a pool deck or a patio-plus-walkway project runs closer to 5 to 7. Weather and permit inspections can add a day or two, especially in winter. Call (888) 255-8179 and we’ll give you a realistic schedule for your specific yard.
A ground-level paver or concrete patio generally doesn’t need a permit; a covered patio, a structural tie-in, or a raised deck above a certain height does. Because Artesia’s plan-check is strict, we tell you up front which side of the line your project falls on and pull the permit when required. Call (888) 255-8179 to talk through your project.
Yes, in most cases. We can demo and rebuild the deck surface and coping without moving the pool or its plumbing, provided the pool wall and skimmer are sound. If we find a failing wall or a cracked skimmer during demo, we’ll quote that repair in writing before we proceed. Call (888) 255-8179 for an on-site look.
Pricing is per square foot and follows the same $3,500 to $11,000 band as a patio, scaled to your area. Drainage correction, material grade and access are the main variables. Call (888) 255-8179 for an exact written quote – estimates are free.
Every patio, walkway and pool deck we build is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Call (888) 255-8179 to get it on the calendar.
Get a Free Patios, Walkways & Pool Decks Estimate in Artesia
We’ll come out, walk the yard with you, measure the actual space and hand you a written line-item estimate – free. No pressure, no vague allowances. Calls are answered by a live person 24/7, and our background-checked, uniformed technicians show up ready to work. Call (888) 255-8179 to schedule your free estimate for Patios, Walkways & Pool Decks in Artesia. If you’re weighing the wider Driveway & Pavers scope or just want to see which parts of Artesia we cover, we’re glad to talk it through.
Written by the team at Groundwork Construction Co.












