







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Santa Fe Springs, CA
We provide independent KraftMaid service across Santa Fe Springs – cabinet installation, refacing, full kitchen remodeling, and quartz or granite tops – for homeowners in the 90670 and 90671 ZIP codes. The difference here isn’t the brand on the door. It’s that most Santa Fe Springs kitchens sit inside 1940s-70s ranch walls that were never framed to carry a full-overlay cabinet load, and we reinforce before we hang. Call (888) 255-8179 for a free estimate.

We’ve installed and serviced KraftMaid service across southeast LA County for years, so we know the door styles, the box construction, and where the finishes give out. We’re an independent outfit – not authorized by KraftMaid – which means we can recommend the right fix instead of pushing a factory replacement. Every project carries our 730-Day Done Right Promise: if it isn’t done right, we make it right.
Why Santa Fe Springs Residents Choose Us for KraftMaid Service

KraftMaid cabinets show up in a lot of Santa Fe Springs kitchens, and the problems are usually predictable. We know which hinge a Passage box uses, which touch-up stick matches a Spring Valley maple, and when a discontinued Expression door can be matched to a current line before the homeowner settles for a mismatched panel. That’s the value of repetition.
We carry OEM-compatible hinges, glides, and finish touch-up as standard for the brand, and we source parts per job rather than promising stock off a shelf we don’t have. When KraftMaid has discontinued the part, we fit quality aftermarket soft-close hardware that works the same or better.
Santa Fe Springs is a short run for us, so scheduling doesn’t drag. Calls get answered by a live person around the clock, not a voicemail box. And every technician is background-checked and arrives in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Solve in Santa Fe Springs
- Thermofoil delamination on Expression doors. Hot inland summers and hard sun through west-facing windows cook the film at the door edges. In Santa Fe Springs, a kitchen that faces an open lot or a freeway shoulder with no afternoon shade will peel years sooner than the same door inland.
- Hinge screw pull-out in Passage and Sonata framed boxes. After years of daily use, screws work loose from the cabinet frame. It happens fastest where the box was hung without proper backing – common in ranch houses where the drywall went straight onto thin wall framing. We add blocking and re-seat the hinges.
- Finish fading and checking on painted MDF and stained maple fronts. UV plus dry Santa Ana winds take the oil out of the wood surface and the color out of the paint. South- and west-facing runs show it first.
- Drawer glide wear and box joint separation in older Spring Valley units. Seasonal humidity swings loosen the joints, and glides that were fine for a decade start to drag or jump.
- Cabinet doors that no longer align to the box. Usually the wall moved, not the door. We check the cabinet’s plumb and the wall’s framing before touching a hinge.
KraftMaid Service in Santa Fe Springs: What Local Conditions Mean for Your Equipment
Here’s the local fact that shapes this work: a large share of Santa Fe Springs housing went up between the late 1940s and the 1970s, and those ranchers on small lots were built with interior walls that were never meant to carry the weight of full-overlay cabinet doors swinging on European hinges. Walk the older blocks near the 605/5 interchange and you’ll see the pattern – modest single-story homes tucked against warehouses, refineries, and truck yards. Original framing in those kitchens is often 2×4 studs with no header or blocking where the upper cabinets land. KraftMaid Passage full-access boxes are heavier than the builder-grade cabinets they replace, and the door load pulls on hinges that need solid wood behind the screws. So before the first box goes up, we open a small section of wall, add blocking and stud reinforcement, and re-hang. A generic cabinet swap skips that step and you get hinge pull-out in three or four years. The freeway dust and intense sun add a second problem: grit works into glide tracks, and UV attacks exposed finishes.
KraftMaid Models & Products We Service in Santa Fe Springs
We work on the KraftMaid lines most common in Santa Fe Springs homes: Passage full-access framed cabinets, Expression thermofoil and painted MDF doors, Spring Valley oak and maple cabinetry, and the Sonata and Vantage series. Each one has its own wear pattern and its own parts path.
Our rule on parts is simple. We use KraftMaid OEM hinges, drawer glides, and touch-up finish when the cabinet box is solid. We switch to quality aftermarket soft-close hardware when an OEM part is discontinued or priced beyond what the repair is worth. We source per job – we don’t claim local stock we don’t hold. And if thermofoil is peeling on more than a few doors, we price refacing against full replacement honestly instead of patching a losing battle. Our goal is the fix that holds, not the biggest invoice.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Santa Fe Springs

Cabinet work here runs from a straightforward door and hardware refresh to a full gut-and-rebuild. Here’s what homeowners in Santa Fe Springs typically see:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
What moves the number: how much wall reinforcement is needed, whether the boxes stay or go, cabinet run length, door style and material, and countertop square footage. Your free estimate includes a walkthrough, a written line-item quote, and a clear read on reface-versus-replace. Upfront pricing, no surprises – the number you see is the number you pay. Call (888) 255-8179 for your Santa Fe Springs quote, and ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Serving Santa Fe Springs, CA – Our Local Coverage Area
We serve Santa Fe Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Santa Fe Springs
Is Groundwork Construction Co. of Downey authorized by KraftMaid? No – we’re an independent provider, not affiliated with or authorized by the manufacturer. That independence lets us recommend the right fix instead of steering you toward a factory replacement, and we stand behind the work with our 730-Day Done Right Promise.
Can you match a KraftMaid door style that was discontinued years ago? Often, yes. We check current KraftMaid lines for a close match first, then a refacing panel, and as a last resort a custom front given a sample door. Call (888) 255-8179 with a photo of the door and we’ll tell you what’s realistic.
Why is the thermofoil peeling on my KraftMaid Expression cabinets in Santa Fe Springs? Heat and UV break down the adhesive at the door edges, and Santa Fe Springs’ hot inland summers plus hard afternoon sun through west-facing windows speed that up. Peeling on a handful of doors is common around year six to ten on a sun-exposed run. If most of a wall is lifting, a reface or a switch to painted or wood fronts on that side usually beats patching.
Do my 1950s Santa Fe Springs walls need reinforcement for new KraftMaid cabinets? Frequently, yes. Many ranch kitchens here were built with light interior framing and no blocking where the uppers hang. We check before we hang and add stud reinforcement where it’s needed, so the heavier KraftMaid boxes and full-overlay hinges have solid wood behind the screws.
How does Santa Fe Springs permitting affect a KraftMaid kitchen install? A like-for-like cabinet swap often needs no permit, but moving plumbing, electrical, or a wall usually does, and the city reviews those plans. We handle the paperwork and clear the inspection. Call (888) 255-8179 for a free estimate and we’ll map out what your project needs.
Service Areas Near Santa Fe Springs
Along with Santa Fe Springs, we cover Santa Fe Springs service area work across the neighboring towns of Downey, Norwalk, Bellflower, Pico Rivera, and West Whittier-Los Nietos, plus Downey and the surrounding southeast LA County communities.
Book Your KraftMaid Service in Santa Fe Springs Today
Ready for a cabinet plan built for your Santa Fe Springs ranch kitchen? Call (888) 255-8179 for a free estimate and design consult. We answer live around the clock, quote upfront, and back the work with our 730-Day Done Right Promise – from foundation to finish line.
Written by the team at Groundwork Construction Co. of Downey.












