







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Whittier: What the Job Actually Involves and What It Costs
Replacing vanities, tile and fixtures in Whittier typically runs $9,000 – $28,000 for a full bathroom surface-and-fixture refresh, and most jobs take two to three weeks from demo to final walkthrough. That figure covers removing the old vanity and flooring, prepping the substrate, setting new tile, hanging a new vanity with countertop and sink, and swapping out the faucet, toilet, lighting and accessories. Smaller scopes land well under that; larger ones with layout changes push toward the top. Call (888) 255-8179 for a free on-site estimate with a written line-item quote.
How We Run a Vanity, Tile & Fixture Job, Stage by Stage

Bathroom surface work looks simple until you open a wall in a 1940s Whittier house. Here’s the real sequence we follow, and what you’ll be deciding along the way.
Stage 1: Walkthrough and written scope (day 1)
We measure the room, check the subfloor, and open the vanity cabinet to look at the shutoff valves and the drain stub. In older Whittier homes this is where we find galvanized supply lines past their life or a cast-iron drain with a cracked hub. You decide the tile layout, vanity size and finish at this stage. The written quote breaks out materials, labor and any allowance for hidden repairs so the number you sign is the number you pay.
Stage 2: Demo and substrate prep (days 2 – 3)
Out comes the old vanity, toilet, flooring and wall tile. Then we address what’s underneath: replacing rotten subfloor sections, leveling with self-leveler, and installing a cement backer board on the walls and floor before any tile goes down. Skipping this step is the number one reason tile cracks two years later, especially on a slab-on-grade mid-century ranch where the floor isn’t perfectly flat to begin with.
Stage 3: Waterproofing and rough-in adjustments (day 3 – 4)
We roll on a liquid waterproofing membrane in the wet areas and set the valve body to the right depth for the new trim. If you’re keeping the plumbing where it is, this is quick. If you want the vanity moved or a new sink location, this is the stage where an extra day or two and a permit may come into play.
Stage 4: Tile setting and grout (days 4 – 8)
Floor tile goes down first, then wall tile, then grout and sealant. You’ll pick the grout color before this stage starts because it changes the whole look. Large-format porcelain on the floor and a subway or picket pattern on the walls is the most common combination we install in Whittier, and it’s the one that holds up best against the region’s hard water and dry summers.
Stage 5: Vanity set, fixtures, and final walkthrough (days 9 – 14)
We set the vanity, install the countertop and sink, hang the mirror and light fixture, connect the faucet and set the toilet. Then we walk the room with you, check every joint, run the water and test the drain. The 730-Day Done Right Promise covers the workmanship from that day forward.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Vanities, Tile & Fixtures
Most of the decisions on this job come down to a handful of real trade-offs. Here’s what actually matters when you’re standing in a showroom.
- Vanity material. Solid wood and plywood boxes (KraftMaid is a common choice) hold up for decades and cost more upfront. Particleboard and MDF boxes are cheaper and fine in a dry, well-vented bathroom, but they swell if a supply line drips behind them.
- Countertop. Quartz is non-porous and needs no sealing, which matters in a hard-water area. Marble looks better and stains easier. Cultured marble is the budget option and works well in a hall bath.
- Floor tile. Porcelain is the workhorse: dense, water-resistant, and it handles the temperature swings in a Whittier bathroom. Natural stone (travertine, slate) looks warmer but needs sealing every year or two.
- Wall tile. Ceramic subway is affordable and forgiving to install. Porcelain large-format panels cost more but mean fewer grout lines to scrub.
- Fixtures and finish. Brushed nickel and matte black are the two finishes we install most. A mid-grade faucet with a ceramic cartridge outlasts a builder-grade one by years.
- Ventilation. An undersized exhaust fan is the quiet cause of most bathroom damage. A fan rated for the room’s square footage costs very little to upgrade and protects everything else you’re paying for.
What Vanities, Tile & Fixtures Costs in Whittier, CA
For a full vanity, tile and fixture replacement in Whittier, expect $9,000 – $28,000. A hall bath with a stock vanity and porcelain floor lands near the bottom; a primary bath with a custom vanity, quartz top and large-format tile lands near the top. A vanity-only swap is far less, and a tile-and-fixture refresh without a new vanity sits in the middle. Here’s what moves the number:
- Room size and tile area. Every extra square foot of tile adds material and labor. A shower surround plus floor plus wainscot adds up fast.
- Hidden conditions. Rotten subfloor, failed galvanized lines or a cracked cast-iron drain found after demo can add hundreds to a few thousand dollars. A written estimate should note this as a contingency, not surprise you later.
- Relocating plumbing or electrical. Moving the vanity or adding a light over the sink means rough-in work, and in Whittier that means a permit.
- Material grade. Porcelain versus natural stone, quartz versus cultured marble, stock versus semi-custom vanity. These choices alone swing a job by several thousand dollars.
- Permit scope. Cosmetic tile and fixture replacement usually doesn’t require a permit. Plumbing relocation or new electrical circuits does.
See the difference
Before
After
Before
After
Before
AfterWhat Whittier Homes Specifically Do to This Job
Whittier’s housing stock splits into two very different jobs. The historic Uptown core (ZIPs 90601 and 90602) is full of 1910s – 1950s Craftsman bungalows and stucco Spanish Colonial Revival homes inside a state-designated historic overlay, so an exterior-visible change can trigger a design-review permit that adds weeks. The eastern tracts (90603, 90604, 90605) are 1950s – 60s slab-on-grade ranches with original galvanized plumbing and undersized electrical panels. In those homes the common failure we find is a vanity that’s been slowly leaking into particleboard for years, plus tile set directly on drywall with no waterproofing. Neither holds up. If you’re working near Uptown, allow extra lead time for permits. If you’re in a mid-century ranch, budget for a possible partial re-pipe. We also serve the surrounding Whittier neighborhoods including 90601 and 90606, and the nearby areas of South Whittier and East Whittier.
Serving Whittier, CA – Our Local Coverage Area
We serve Whittier and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Vanities, Tile & Fixtures in Whittier

A full bathroom refresh takes two to three weeks from demo to walkthrough, with a single-bath scope finishing closer to two. A vanity-only replacement is a one to two day job. Call (888) 255-8179 to schedule your free estimate and get a firm timeline.
Cosmetic replacement of tile, a vanity set in the same location, and like-for-like fixture swaps generally don’t require a permit. Moving plumbing, adding an electrical circuit, or changing the room’s footprint does. We pull the permits and handle the inspections when the scope calls for it. Call (888) 255-8179 to confirm what your job needs.
Yes. Most of our Whittier jobs are surface-and-fixture refreshes that keep the plumbing right where it is, which keeps the cost down and the timeline short. If you want the vanity relocated or a sink moved, we can do that too, but it adds rough-in work and a permit.
Plan on $9,000 – $28,000 for a full bathroom refresh, with the final number driven by room size, material grade and what we find behind the walls. Call (888) 255-8179 for a free estimate and a written line-item quote.
Every vanities, tile and fixtures job we complete is covered by our 730-Day Done Right Promise: if something isn’t done right, we make it right. That’s backed in writing, not just promised. Call (888) 255-8179 to talk through your project.
Ready for a Real Number on Your Whittier Bathroom?
We’ll come out, look at the room, open the vanity cabinet and check the plumbing, then hand you a written estimate with the line items spelled out. No vague ranges, no change-order surprises. If the job turns out to be part of a full Bathroom Remodeling in Whittier scope, we’ll show you how the pieces fit together. Call (888) 255-8179 for your free estimate, and take a look at our Bathroom Remodeling service if you’re considering more. Homeowners often pair this with Tile Roofing in Whittier or Specialty Roofing in Whittier while the crew is already out.
Written by the team at Groundwork Construction Co.












