







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Downey, CA
Custom and geometric windows are made-to-order units shaped for an exact opening or design intent: true arches, half-rounds, eyebrows, circles, ovals, trapezoids, rake-top triangles, and multi-unit combinations that don’t fit a standard rectangular frame. Homeowners need them when a wall, roofline, or stairwell calls for a shape that stock windows can’t deliver, and they’re most often ordered in Downey for Spanish Colonial and mid-century ranch homes where the original trim, plaster, or brickwork sets hard limits on what will actually fit. Groundwork Construction Co. of Downey handles the whole path from field measurement to final trim, with custom units from Andersen and Marvin, live-person phone coverage around the clock, and our 730-Day Done Right Promise standing behind the installation. Call (888) 255-8179 and a real person will pick up.
Where custom work usually starts is with a call to our Windows & Doors service, since geometric units are one branch of the same trade: measuring, ordering, and setting glass and frames so the opening closes tight and the wall around it stays sound.
Most of what makes geometric windows hard isn’t the glass. It’s the opening. A half-round that looks simple on paper gets complicated the moment the framing isn’t square, the original stucco has a crack running through it, or the wall assembly needs new blocking before a curved unit can carry its own weight. We measure the rough opening ourselves, build a template when the shape calls for it, and verify the unit against the wall before it’s ordered. That single step prevents the most expensive kind of mistake on custom glazing: a window that’s beautiful and the wrong size.
Key Takeaways
- Custom and geometric windows are made to a specific shape and size, not cut down from stock units.
- Lead times on true arches and circles typically run longer than rectangular replacements, so planning ahead matters.
- Pricing depends mostly on shape complexity, glazing, frame material, and what the wall needs to receive the unit.
- Our technicians have up to 12 years of experience, and every installation is covered by the 730-Day Done Right Promise.
- Calls are answered by a live person 24/7, and estimates are free.

When You Need Custom & Geometric Windows
Geometric glazing isn’t a cosmetic upgrade you stumble into. It usually shows up because the architecture demands it or because an existing opening has failed. These are the scenarios we see most often in Downey:
- A gable or rake wall with an angled top. Triangle and trapezoid windows exist to fill that triangular dead space under a pitched roofline. In Downey’s older ranch and Spanish-style homes, a gable window is often the only way to bring light into a vaulted interior without cutting a new opening in a bearing wall.
- A stairwell or two-story entry that wants a tall, narrow shape. Arched transoms over an entry door, or a stacked pair of half-rounds above a landing, are common in the two-story homes built through the 1980s and 1990s across the city. These need exact radius matching so the arch reads as one continuous curve.
- An original feature window that’s rotted, fogged, or failing. Half-rounds and circles from decades past often have failed seals, cracked sashes, or wood trim that’s given up. When the shape is unusual, a stock replacement won’t work; the unit has to be reproduced to the opening.
- A remodel that changes the wall. Adding a room, reworking a kitchen, or opening up a rear wall frequently produces an opening that no standard size will fill cleanly. Custom glazing lets the design drive the window rather than the other way around.
- A heritage or HOA-sensitive facade. Some Downey neighborhoods have design review or architectural expectations around window profiles, muntin patterns, and trim color. A custom unit lets you match the original proportions instead of forcing a stock grid onto a wall that was never built for one.
- A sun-exposure problem that shape can solve. A high circular or elliptical window placed under an eave can pull in daylight while keeping direct afternoon sun off the interior, which matters in a city where summer heat loads on west-facing walls are real.
Our Custom & Geometric Windows Process
Custom shapes leave little room for guesswork. Here’s how we run a geometric window job from first call to final walkthrough:
- On-site measurement and template. We measure the rough opening in multiple places, check for square and plumb, and build a physical template for arched, circular, and angled units. A template catches the wall that isn’t true before it becomes an order problem. We also look at what’s behind the wall: framing, sheathing, flashing, and any existing water damage that needs to be addressed first.
- Product selection and specification. You choose frame material, glazing, finish, and grille pattern with our help. We work with Andersen and Marvin for custom units, and we’ll walk you through the tradeoffs on each: how a clad exterior holds up against Downey’s dry summers and occasional winter rain, how low-E glazing affects heat gain on a west wall, and what the lead time looks like for your shape. Upfront pricing is confirmed before anything is ordered.
- Ordering and scheduling. Once the spec is locked, we place the order and give you a realistic timeline. True arches and circles take longer than rectangles because they’re built to your template, not pulled from a shelf. We keep you informed of the delivery window and schedule the installation so the opening isn’t left exposed any longer than necessary.
- Removal and opening preparation. On install day, we protect the interior, remove the old unit, inspect the framing and sheathing, and repair anything that’s failed. If the wall needs new blocking, flashing, or a rebuilt sill, we handle it before the new window goes in. Custom units are heavy and the opening has to be right.
- Installation, flashing, and trim. The unit is set plumb and square, shimmed, fastened, and flashed so water sheds away from the wall. Interior and exterior trim follow, matched to the existing profile where the home calls for it. This is where a geometric window either reads as original to the house or looks added on, and the difference is in the detail work.
- Final walkthrough and guarantee. We check operation, seal, and finish with you, answer questions, and leave the site clean. Everything we install is covered by the 730-Day Done Right Promise, so if something isn’t right, we make it right.
Because we run seven core trades under one company, a window project that turns into wall repair, exterior trim, or a small structural adjustment stays in the same hands. That full-scope approach is part of how we keep a geometric install from turning into three separate contractors and a scheduling headache. You can see the wider picture on our home page.

Custom & Geometric Windows Pricing in Downey
Custom and geometric windows in Downey generally run from about $900 to $3,500 per unit installed, and combinations or large feature assemblies can go higher. The shape and the wall around it drive the number more than the glass does. These ranges are honest ballparks, not quotes; we confirm exact pricing after we’ve measured your opening.
| Line item | Typical installed range |
|---|---|
| Standard rectangular replacement (for comparison) | $450 – $1,100 |
| Half-round, eyebrow, or arch-top unit | $900 – $2,000 |
| Full circle or oval feature window | $1,200 – $2,800 |
| Trapezoid or rake-top gable window | $1,000 – $2,400 |
| Multi-unit geometric assembly (two or more shapes combined) | $2,500 – $5,500+ |
| Template, framing, and opening preparation | $200 – $700 |
| Trim, flashing, and finish work | $150 – $600 |
What pushes the price up: the complexity of the shape (a true radius costs more than an angled top), glazing choices like low-E or tempered glass, frame material (clad wood and premium composites sit at the top), whether the wall needs framing or sheathing repair behind the opening, and how many separate units make up the assembly. Lead time also affects cost, since rush orders on custom shapes carry a premium.
What keeps the price down: measuring before ordering so nothing has to be remade, choosing a shape that’s already close to the manufacturer’s standard template, and combining units into one assembly rather than ordering separate windows with separate trim.
Every estimate is free, and the price we give you is the price you pay: no-hassle upfront pricing, no surprises. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, which helps when a geometric window project is part of a larger remodel. Call (888) 255-8179 for an exact quote.
Is it cheaper to repair or replace a geometric window?
Repair is usually cheaper when the frame and sash are sound and the problem is a failed seal, hardware, or a small section of trim, while replacement makes more sense when the unit is rotted, badly out of square, or the shape can no longer be matched with new glazing. We’ll tell you honestly which path fits your window. On custom shapes, a repair that preserves the original profile is often worth doing even at a higher cost than a stock replacement, because the arch or circle is part of the house. Call (888) 255-8179 and we’ll look at it with you.
Can you handle a geometric window as part of a larger remodel?
Yes, and it’s often the smartest way to do it. A geometric window that goes in during a kitchen, bathroom, or addition project can be framed, flashed, trimmed, and finished in the same sequence as the rest of the work, which saves both time and rework. We run windows alongside remodeling under one company, so the trades line up. If your project touches other parts of the house, our Downey service area page shows the scope we cover locally.
FAQs – Custom & Geometric Windows
How much do custom geometric windows cost in Downey?
Custom geometric windows in Downey typically cost $900 to $3,500 per unit installed, with multi-unit assemblies reaching $5,500 or more. The main cost drivers are shape complexity, glazing, frame material, and opening preparation. We confirm exact pricing after measuring your opening. Call (888) 255-8179 for a free estimate.
How long does it take to get a custom geometric window installed?
Plan on several weeks from order to installation for true arches, circles, and angled units, since they’re built to your template rather than pulled from stock. Measurement and ordering come first, then the build lead time, then install day, which is usually one day for a single unit. We give you a realistic schedule up front so you can plan around it. Call (888) 255-8179 to start the measurement.
Can you match the shape and profile of an existing geometric window?
Yes. That’s one of the main reasons homeowners call us for geometric work: reproducing a half-round, circle, or angled window so it matches the house rather than fitting a stock size. We template the opening and match trim and grille patterns to the original where possible. If the original unit is failing, we can often preserve the look while upgrading the glazing and frame. Call (888) 255-8179 to talk through the match.
Can you install a geometric window in one visit?
Most single-unit installations are completed in a single visit once the custom window is on site and the opening is prepared. Multi-unit assemblies, wall repairs, or openings that need new framing can take longer, and we’ll tell you which case you’re in before we schedule. Calls are answered by a live person 24/7, so you’re never stuck waiting for a callback. Call (888) 255-8179 for a free estimate.
Do you offer financing for custom window projects?
Yes. We offer 0% financing for 18 months and $1,000 off projects over $10,000, which makes a larger geometric window project or a combined remodel easier to plan. Upfront pricing means the number we quote is the number you pay, and the 730-Day Done Right Promise covers the workmanship. Call (888) 255-8179 to go over your options.
Ready to Talk About Your Downey Window Project?
Custom and geometric windows are the kind of work that rewards careful measurement and a contractor who stays on the job from template to final trim. Groundwork Construction Co. of Downey measures the opening, helps you choose the right unit and glazing, installs it with proper flashing and trim, and stands behind it with the 730-Day Done Right Promise. Our technicians have up to 12 years of experience, our calls are answered by a live person 24/7, and every estimate is free with upfront pricing. Whether you need a single arch replaced or a full set of gable windows for a remodel, start with a call to (888) 255-8179 and we’ll get a measurement on the calendar.
Written by the team at Groundwork Construction Co. of Downey, serving Downey.


