







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Santa Fe Springs, CA: What It Costs and How It’s Done
Backsplash, tile & flooring work in Santa Fe Springs usually runs $800 – $2,500 for a kitchen backsplash, with full kitchen tile and flooring projects landing inside a $14,000 – $45,000 range when the job grows into counters, island surfaces, and floor replacement. A backsplash alone takes two to three days; tile floors in a 1950s ranch home here typically take four to six. Call (888) 255-8179 for a free on-site estimate.
How We Sequence a Tile and Flooring Job in Santa Fe Springs

Tile work rewards patience and punishes shortcuts. Here’s the actual order we run, and what you’ll be deciding at each stop.
Stage 1: Tear-out and substrate inspection (day 1)
We pull the old backsplash or flooring and get a look at what’s underneath. In Santa Fe Springs, that’s often drywall softened by decades of splash, or a plywood subfloor that’s cupped from a slow leak. If the substrate is sound, we move on. If it isn’t, you’ll get photos and a written price for the repair before anyone touches a trowel.
Stage 2: Layout and dry-fit (day 1 – 2)
This is where you make your one big call: grout line size, tile orientation (stacked, offset, herringbone), and where the pattern starts. We lay tile out dry on the floor or mark the wall so you can see it before it’s set. A herringbone backsplash eats 20 – 30% more material than a straight stack, so this is also where waste factor gets locked in.
Stage 3: Setting and curing (day 2 – 4)
Thinset goes down, tile gets set, and then it sits. Large-format floor tile needs 24 hours before grout. We don’t rush the cure, because grout over uncured thinset is how you get cracked joints six months later. Expect the kitchen or room to be out of service during this window.
Stage 4: Grout, seal, and caulk (day 4 – 5)
Grout color is a design decision, not an afterthought. Epoxy grout costs more but resists staining and won’t need resealing. Cementitious grout is cheaper and easier to touch up down the road. We caulk the inside corners and the seam where tile meets counter, because grout there will crack.
Stage 5: Outlet cuts, trim, and cleanup (day 5 – 6)
We cut in around outlets, install edge trim or bullnose, and clean the haze off the tile. If this job is part of a full Kitchen Remodeling in Santa Fe Springs, we coordinate tile sequencing with cabinet and counter installation so you’re not living without a kitchen longer than necessary.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Backsplash, Tile & Flooring Options You’ll Choose Between
Most of the money question comes down to material selection. Here’s the honest read on each.
- Ceramic wall tile – the budget choice for backsplashes. $6 – $15 per square foot installed. Holds up fine behind a stove, but it chips if you drop a cast-iron pan on it.
- Porcelain tile – denser, more water-resistant, better for floors. $8 – $22 installed. The workhorse pick for Santa Fe Springs kitchens and baths.
- Natural stone (travertine, slate, marble) – $15 – $40 installed. Beautiful, but needs sealing every year or two, and soft stones etch from citrus and vinegar.
- Large-format tile (24×24 and up) – fewer grout lines, easier to clean, but demands a perfectly flat substrate. Leveling the floor first can add $1,200 – $3,000.
- Glass or mosaic – $12 – $30 installed. Great for a shower niche or a small backsplash accent, tedious to install, so labor climbs.
- Luxury vinyl plank flooring – $4 – $10 installed. Warm underfoot, waterproof, and forgiving over the slightly uneven floors common in older ranch homes.
What Backsplash, Tile & Flooring Costs in Santa Fe Springs, CA

The realistic range for this work in Santa Fe Springs is $800 – $2,500 for a backsplash and $14,000 – $45,000 for a broader tile-and-flooring scope that ties into counter and island surfaces. A few things push the number to either end.
- Square footage. A galley backsplash behind one counter might be 20 square feet; a full U-shaped kitchen can hit 60. That spread alone moves the price by $1,000+.
- Existing condition. Cracked or water-damaged substrate means demo, repair, and possibly new drywall before tile goes down.
- Pattern complexity. Herringbone, chevron, and diagonal layouts add labor and waste. Straight stack is the cheapest to install.
- Material grade. Porcelain over ceramic, stone over porcelain, epoxy over cement grout. Each step up adds real cost.
- Matching adjacent surfaces. If the new floor needs to meet an existing tile at a doorway, transitions and leveling take time.
Your written estimate lists tile and materials, prep and substrate repair, setting and grout, caulk and trim, and cleanup. It typically does not cover structural changes or plumbing relocation, which we price separately once we’ve seen what’s behind the wall.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Fe Springs Homes Specifically Do to This Job
Santa Fe Springs is an industrial city with residential pockets tucked alongside it, and that shapes tile work in ways you won’t see two towns over. Most of the housing stock dates to the late 1940s through the 1970s, which means we’re often pulling backsplash off drywall that’s sat behind a stove for forty years, or finding subfloor with old moisture damage. The 605/5 corridor also leaves a fine dust layer in homes near the truck yards, so cleanup and sealing matter more than they would on a quieter street. War-era and mid-century ranch layouts mean small kitchens with tight backsplash footage and doorways that complicate floor transitions. If a job touches a light commercial or warehouse space, SCAQMD and City design review add weeks to the permitting calendar.
Serving Santa Fe Springs, CA – Our Local Coverage Area
We serve Santa Fe Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Santa Fe Springs

A standard kitchen backsplash takes two to three working days from tear-out to final caulk. Larger layouts or stone tile with sealing can push to four.
No, tile and backsplash installation typically does not require a permit. Structural changes, plumbing relocation, or electrical work do, and we’ll tell you upfront what needs one.
Yes. We cut around existing outlets and plumbing, and most backsplashes go in without touching either. If you want outlets relocated, we coordinate that with the tile schedule.
Porcelain or ceramic floor tile in Santa Fe Springs typically runs $8 – $22 per square foot installed, with substrate repair and large-format tile pushing toward the high end. Call (888) 255-8179 for an exact figure.
Every tile and flooring project we complete is backed by our 730-Day Done Right Promise. If a tile lifts, a grout line cracks, or a seam fails within that window, we come back and fix it.
Get a Free Backsplash, Tile & Flooring Estimate in Santa Fe Springs
If you’re ready to price a backsplash, tile floor, or a larger Kitchen Remodeling scope, we’ll come out to your Santa Fe Springs home, measure, and walk you through material options before you commit to anything. The estimate is free and written line by line. Call (888) 255-8179 to schedule.
Homeowners in nearby Santa Fe Springs often pair tile and flooring with a Tub-to-Shower Conversion in Santa Fe Springs or updated Vanities, Tile & Fixtures in Santa Fe Springs so the whole house matches. Our technicians have up to 12 years of experience, arrive in uniform, and carry our 730-Day Done Right Promise on every job.
Written by the team at Groundwork Construction Co.












