







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Pico Rivera: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Pico Rivera typically runs $4,500 – $12,000 for a new walk-in shower and $9,000 – $28,000 when the shower is part of a larger bathroom rework, with most single-shower jobs finished in 5 to 9 working days once materials are on site. The work means removing the old pan and surround, re-flashing and pre-sloping the floor, setting new tile or a solid-surface panel system, and hanging glass. For a written, line-item price on your Pico Rivera bathroom, call (888) 255-8179.
How a Walk-In Shower Remodel Actually Runs, Start to Finish

Most contractors quote “a new shower” like it’s one event. It isn’t. Here’s the real sequence we run, with the decisions you make along the way, so you know when you’re needed and when you’re not.
Stage 1: Tear-out and rough inspection (days 1 – 2). We pull the old shower door, surround, and pan, then take the wall down to studs on the wet side. This is the day surprises surface. In a 1950s Pico Rivera tract home, that’s often rotted subfloor near the drain or a pan that was set on drywall instead of cement board. Once exposed, you decide whether to patch and move on or fix the underlying framing and plumbing now. We don’t hide that decision.
Stage 2: Plumbing rough-in and valve swap (day 2 – 3). If your shower valve stays where it is, this is quick. If you’re moving the head, adding a hand-held on a slide bar, or shifting the drain to change shower size, expect an extra day and a plumbing rough inspection before anything gets closed up. You choose the valve and trim here: a basic pressure-balance valve or a thermostatic one that holds temperature when someone flushes a toilet downstairs.
Stage 3: Waterproofing (day 3 – 4). This is the stage that decides whether the shower lasts 10 years or 25. We install a bonded waterproofing membrane over a pre-sloped mortar bed and band the seams and corners. Flood-test or inspection sign-off happens before tile. You don’t have to choose anything here, but you should ask any contractor what membrane system they use and whether the pan is pre-sloped. A flat pan behind tile is the number one cause of failed showers we tear out.
Stage 4: Tile and finish (days 4 – 7). Wall tile, floor tile, niche, bench if you want one, then grout and seal. Large-format porcelain goes up faster than small mosaic; a herringbone pattern adds a day or two in labor. You’ll pick tile, grout color, and whether the niche is recessed or a surface-mounted shelf.
Stage 5: Glass and final walkthrough (days 7 – 9). Frameless glass is templated after tile is set, so there’s a fabrication window of roughly 5 to 10 business days on custom panels. We schedule the glass measurement the same week tile finishes so the shower isn’t sitting open. Final walkthrough covers caulk lines, door swing, drain flow, and the care instructions for your specific tile and glass coating.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change Your Shower
Almost every decision here trades cost against maintenance. Here’s how we frame it for homeowners, honestly.
- Tile vs. solid-surface panels. Porcelain or ceramic tile runs $8 – $18 per square foot installed and gives you the widest design range, but grout needs sealing and re-sealing. Acrylic or solid-surface wall panels cost less in labor, install in a day, and clean with a wipe, but they won’t match a custom tile look. Tile suits a forever home; panels suit a fast, low-maintenance refresh.
- Frameless vs. framed glass. Frameless glass shows off the tile and reads as an upgrade, but it costs more and needs a truly square opening. Semi-frameless is the middle path if your walls aren’t perfectly plumb.
- Curb vs. curbless. A curbless, zero-threshold entry is the gold standard for aging in place, but it requires recessing the floor framing or building up the surrounding floor, which adds cost and complexity. A low curb of 2 – 4 inches is the practical middle.
- Fixtures. A Delta or Moen valve and trim combo is reliable workhorse hardware. Kohler offers more finish and style range at a premium. The valve behind the wall matters more than the handle you touch.
- Bench and niche. A built-in bench adds framing and tile, worth it if you or a family member needs to sit. A recessed niche costs little and keeps bottles off the floor.
What Walk-In Showers & Shower Remodeling Costs in Pico Rivera, CA

For Pico Rivera, expect $4,500 – $12,000 for a dedicated walk-in shower project, and $9,000 – $28,000 when the shower is folded into a fuller bathroom rework. Here’s how the number moves.
| Scope | Typical range in Pico Rivera |
|---|---|
| Shower replacement (same footprint) | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Full bathroom remodel including shower | $9,000 – $28,000 |
The five variables that push a job to the low or high end:
- Footprint change. Keeping the drain and valve where they are saves real money. Moving the drain or growing the shower into a closet means cutting and re-routing plumbing under the slab or through the floor framing.
- Condition behind the wall. Rot, old galvanized lines, or a pan set on drywall adds demo and repair days.
- Material grade. Basic ceramic and a framed door sit low; large-format porcelain, a mosaic floor, and frameless glass sit high.
- Curbless or bench framing. Structural changes add labor and inspection.
- Permit scope. A like-for-like shower swap may not need a permit; moving plumbing or structure does, and that adds timeline and inspection steps.
A written estimate from us lists demo, waterproofing, tile, fixtures, glass, and permit line items separately. What usually isn’t included: the cost of repairing unrelated plumbing elsewhere in the house, upgraded tile beyond the allowance you choose, and custom glass lead times. Call (888) 255-8179 for an exact quote – estimates are free, with no-hassle upfront pricing and 0% financing for 18 months available.
See the difference
Before
After
Before
After
Before
AfterWhat Pico Rivera Homes Specifically Do to This Job
Pico Rivera is a built-out, post-war suburb, and most of the housing here went up in the 1950s and 60s – small three-bedroom stucco tract homes on gridded lots (ZIPs 90660, 90661, and 90662). That age changes a shower remodel in specific ways. Original pans and surrounds in these homes are often past their service life, and the subfloor around a floor drain is commonly soft from decades of slow leaks. When a family in the River Estates area or off Passons Boulevard asks for a walk-in shower, we budget time for demo-day repairs that a newer house wouldn’t need.
Because most projects here are owner-occupied remodels for families who stay in the home for decades, we build showers to last rather than to flip. That means a pre-sloped mortar pan and a waterproofing membrane rather than a fiberglass kit. Permits for plumbing and structural work go through Los Angeles County, and we pull them and pass inspections as part of the job.
Serving Pico Rivera, CA – Our Local Coverage Area
We serve Pico Rivera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Pico Rivera

Most single-shower projects take 5 to 9 working days on site, plus roughly 5 to 10 business days if custom frameless glass is ordered. Demo and waterproofing are the slowest stages, so a same-footprint swap finishes toward the faster end. Call (888) 255-8179 to get a schedule for your specific bathroom.
You need a permit when plumbing, electrical, or structure changes – moving the drain, relocating the valve, or recessing the floor for a curbless entry. A like-for-like shower replacement often doesn’t require one. We confirm the requirement with the county before work starts and pull permits and pass inspections when they apply.
Yes, in most cases. Keeping the drain and valve where they are is the cheapest and fastest path and still allows new tile, a pre-sloped pan, a niche, and glass. If the shower has to grow, changing the plumbing location is what adds cost and permits.
A dedicated walk-in shower runs $4,500 – $12,000, and a shower built into a full bathroom rework sits in the $9,000 – $28,000 range. Tile grade, glass style, and whether the drain or plumbing moves are the biggest swing factors. Call (888) 255-8179 for a free, line-item estimate.
Every shower we build is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That reflects real confidence in the waterproofing and finish work, not a short fine-print window. Call (888) 255-8179 to schedule your free on-site estimate.
Get a Free Estimate for Walk-In Showers & Shower Remodeling in Pico Rivera
Walk-In Showers & Shower Remodeling in Pico Rivera starts with a free on-site estimate. We measure the bathroom, look at what’s behind the current shower, and hand you a written line-item price with the 730-Day Done Right Promise attached. Calls are answered by a live person, 24/7, with no voicemail. Call (888) 255-8179 to book your estimate and ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.












