







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Artesia, CA: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Artesia typically runs $9,000 – $28,000, with a standalone shower install landing between $4,500 and $12,000 and a full shower replacement between $3,000 and $8,500. Most jobs move from demolition to a finished, waterproofed shower in two to four weeks, though tight Artesia lots and older tract homes can stretch that. Call Groundwork Construction Co. at (888) 255-8179 for a free on-site estimate with a written, line-item quote.
How a Shower Rebuild Actually Runs, Day by Day

This is the sequence we follow on nearly every walk-in shower and shower remodeling job in Artesia, and knowing it up front keeps you from guessing what happens next.
- Day 1: Site protection and demolition. We lay floor protection, shut off water, and tear out the old pan, tile, and backer. On tight-lot homes, debris goes straight to the alley or driveway in one haul so it doesn’t block the walkway. You confirm the new shower footprint and where the drain and valve will sit before the first swing of the hammer.
- Days 2 – 3: Rough-in and framing. If we’re relocating the drain, moving the valve, or adding a niche or bench, this is when the plumbing and framing happen. An Artesia inspection for any plumbing changes is typically scheduled here, and we pull the permit before demolition so the rough-in doesn’t sit exposed. You sign off on niche placement and bench height at this stage.
- Days 3 – 5: Waterproofing and the pan. This is the stage that decides whether the shower lasts. We install a sloped mortar bed or a bonded waterproofing membrane system, then flood-test it. In Artesia’s older homes, this often means correcting a floor that wasn’t pitched correctly to begin with. Nothing gets tiled until the pan holds water.
- Days 5 – 10: Tile and glass template. Wall tile, grout, and sealing go in. Frameless glass gets templated once the finished surfaces are set, and fabrication usually takes another 7 – 10 business days. You pick grout color and glass hardware now, not later.
- Days 10 – 14: Fixtures, glass install, and final walkthrough. Showerhead, valve trim, handle, and the glass panel drop in. We run a live leak test, and we walk the finished shower with you before we call it done. The whole job is backed in writing by our 730-Day Done Right Promise.
That timeline assumes no surprises behind the wall. On Artesia’s older stock, we sometimes open a shower and find framing that was never properly waterproofed, which adds two or three days of repair before tile goes back up. We flag that cost before touching it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before Tile Goes In
Walk-in shower design comes down to a handful of decisions, and each one carries a real trade-off in cost and maintenance. Here’s what you’re actually choosing between.
- Shower pan type. A tiled mud-bed pan with a linear drain looks best and lasts decades, but it’s the higher-cost option. A prefab acrylic pan is faster and cheaper, and it suits a tighter budget or a rental property. We use Kohler shower bases where a prefab pan fits the opening.
- Wall finish. Large-format porcelain is the go-to for a walk-in shower: fewer grout lines, easier to clean, and durable in a wet environment. Natural stone tile delivers more depth but needs sealing every year or two. Keep the tile consistent with the rest of the room if you’re tying this into a wider renovation; our Bathroom Remodeling service covers the full scope when the shower is part of a bigger gut.
- Glass and enclosure. Frameless glass is the standard for a walk-in shower and reads clean in a small Artesia bathroom. A hinged door or a fixed panel depends on how much clearance you have, and in a small hall bath, a pivot door often saves a few inches of swing.
- Fixtures and finish. A Moen valve and trim set is a dependable mid-tier choice; a Delta thermostatic valve adds precise temperature control. Both are available and both carry manufacturer warranties on top of our workmanship promise.
- Drain placement. A center drain is the cheapest, but a linear curbless drain lets you lose the curb entirely, which is what many buyers actually want for aging-in-place. It costs more and needs a slightly deeper subfloor build-up to work.
You’ll also decide on a bench or niche, a grab bar, and a handheld showerhead, though a grab bar in solid blocking is worth adding even if you don’t need it yet.
What Walk-In Showers & Shower Remodeling Costs in Artesia, CA

Walk-In Showers & Shower Remodeling in Artesia runs from $9,000 to $28,000 for a full bath-scope job; a shower-only build runs $4,500 – $12,000 for a walk-in install or $3,000 – $8,500 for a straight shower replacement. Here’s the line-item picture:
| Item | Typical range |
|---|---|
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Full bath-scope shower remodel | $9,000 – $28,000 |
What pushes a job to the top of that range? Five things: the size of the shower footprint, the condition of what’s behind the wall, whether you’re relocating the drain or valve (which means opening the floor or wall), the material grade of tile and glass, and the permit scope if the plumbing changes. A curbless linear-drain shower with frameless glass and large-format porcelain is the high end. A one-for-one replacement over a prefab pan is the low end.
Every written estimate from Groundwork lists what’s included: demo, waterproofing, tile, fixtures, glass, permit, and cleanup. What’s not included will be spelled out separately, like a move of the plumbing stack or unexpected framing repair. The number you see is the number you pay, no change orders for the work we quoted. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Artesia Homes Specifically Do to This Job
Artesia is a small, dense city, and most of the housing stock is 1950s – 1960s single-story tract homes on tight parcels, often with later additions or enclosed patios that were never permitted. That matters for a shower rebuild in two ways. First, plan-check at the Artesia permitting office is strict, so any plumbing relocation needs a clean, accurate set of drawings to pass. Second, an unpermitted addition or enclosed patio frequently hides the wall you’re about to open, and we’ve had to reconcile “phantom” square footage and previous framing before a shower could go in. Pre-1978 homes in ZIP codes 90701 and 90702 also call for lead-safe handling during demo, which we build into the schedule and budget.
The other local factor is waterproofing. Artesia’s mostly dry coastal-basin climate doesn’t let you off the hook; intense winter rain bursts occasionally overwhelm older drainage, and a shower pan that wasn’t pitched right becomes a slow leak into the subfloor. We correct the pitch and drainage as a matter of course. If you’re working through the wider Bathroom Remodeling in Artesia scope, we coordinate the shower with the rest of the room. When roof drainage above the bath ties into the same set of issues, homeowners often pair this with Roof Replacement & Installation in Artesia or Metal Roofing in Artesia. We serve all of Artesia and the surrounding area.
Serving Artesia, CA – Our Local Coverage Area
We serve Artesia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Artesia

A typical walk-in shower and shower remodeling job in Artesia runs two to four weeks from demo to final glass install. Glass fabrication alone adds 7 – 10 business days, so plan on scheduling the template as soon as tile is finished. Call (888) 255-8179 for a timeline specific to your bathroom.
You need a permit if the work moves plumbing, changes the drain, or alters framing; a cosmetic tile-and-fixture swap over an existing pan usually does not require one. Because Artesia’s plan-check is known to be strict, we pull permits and schedule inspections before work starts, not after.
Yes, in many cases. If the drain and valve stay in place and the footprint doesn’t change, we can build a walk-in shower over the existing rough-in with no structural work, which is the lower-cost route. A curbless or linear-drain shower usually requires moving the drain, which adds cost and a permit.
Walk-In Showers & Shower Remodeling in Artesia runs $9,000 – $28,000 for a full bathroom scope, or $4,500 – $12,000 for a shower-only install. Call (888) 255-8179 for an exact quote; estimates are free.
Every shower we build is covered by our 730-Day Done Right Promise. If something isn’t done right, we make it right, and that’s in writing.
Get a Free Estimate for Your Artesia Shower
If you’re ready to price a walk-in shower remodel in Artesia, the next step is a free on-site estimate. We’ll measure the footprint, check what’s behind the wall, and hand you a written line-item quote with no surprises. Call (888) 255-8179 and a live person answers, any hour. We’re background-checked, uniformed, and backed in writing. Financing available.
Written by the team at Groundwork Construction Co.












