







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Artesia, CA: What It Involves and What It Costs
Metal roofing in Artesia, CA runs $15,000 – $40,000 for a full installation, with most single-story tract homes landing in the $18,000 – $28,000 range once tear-off, underlayment and trim are included. The job itself takes 3 to 6 working days on a typical Artesia roof, plus 2 to 4 weeks ahead of that for plan-check through the city. Call (888) 255-8179 to schedule a free on-site estimate and get a written line-item number before anything is ordered.
How a Metal Roof Goes On, Stage by Stage
Every metal roof follows the same sequence whether it’s a 1,200-square-foot post-war tract house or something larger. Here’s what actually happens, in order, so you know what to expect on each day.
- Stage 1: Inspection and deck assessment (day 1). We get on the roof, check the decking for soft spots, and confirm what’s underneath the existing layers. On older Artesia homes this is where we find out if the sheathing needs replacement, which adds a day and materials. You decide at this point whether to replace bad decking now or patch and accept the risk.
- Stage 2: Tear-off and prep (days 1 – 2). Old shingles or tile come off, the deck gets inspected and repaired, and we install new underlayment. This is the messy, loud part. You’ll want to move cars out of the driveway and expect a debris trailer on the street. We tarp and protect landscaping as we go.
- Stage 3: Trim, flashing and edge metal (day 2 – 3). Eave trim, rake trim, valley flashing and penetration boots go on before any panels. This is where water intrusion gets prevented, so it’s the step we don’t rush. You confirm the trim color matches what you picked.
- Stage 4: Panel installation (days 3 – 5). Panels go up in order, screwed or seamed depending on the system. On a standing seam roof the panels are mechanically seamed at the joints; on an exposed-fastener system the screws go through the panel face with washers. Most jobs take 2 to 3 days for panels on a standard-sized home.
- Stage 5: Final inspection and cleanup (day 5 – 6). We walk the roof, check every penetration and seam, sweep the yard with a magnet for screws, and schedule the city inspection. You get a written punch list of anything we found and fixed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Metal roofing isn’t one product. The system you pick changes the price by several thousand dollars and how long the roof lasts. Here’s the honest breakdown:
- Standing seam panels. The premium option. Concealed fasteners, clean look, no exposed screws to back out. Costs more upfront (typically $3 – $5 more per square foot than exposed fastener) but lasts longest and holds up best against the winter rain bursts Artesia gets. Best for homeowners planning to stay put.
- Exposed-fastener panels (R-panel or corrugated). The budget-friendly metal option. Faster to install and cheaper per square foot, but the screws need checking every few years and the look is more agricultural. Works well on detached garages and outbuildings, less common on the main house.
- Stone-coated steel. Metal panels pressed to look like tile or shake. Popular in Southern California because it gives the tile look many Artesia homes have without the weight. Runs in the middle of the price range.
- Panel gauge. 26-gauge is standard and fine for most residential work; 24-gauge is heavier and dents less. We’ll tell you honestly whether the upgrade is worth it for your roof.
- Finish and color. Kynar 500 finishes hold color longest and cost a bit more than standard polyester. If you’re matching an existing color or dealing with an HOA, this matters.
- Underlayment. Synthetic underlayment is standard nowadays and outperforms old felt. On low-slope sections, we may recommend a peel-and-stick membrane instead.
What Metal Roofing Costs in Artesia, CA

Most metal roof installations in Artesia fall between $15,000 and $40,000. The spread is wide because the variables below move the number more than anything else.
| Line item | Typical range |
|---|---|
| Full metal roof installation (materials + labor) | $15,000 – $40,000 |
| Tear-off and disposal of existing roof | $1,500 – $4,500 |
| Decking repair or replacement (if needed) | $800 – $3,500 |
| Standing seam upgrade vs. exposed fastener | +$3,000 – $8,000 |
| Trim, flashing and penetration boots | $600 – $2,000 |
What moves the price to the low end: a small, simple roof with few penetrations, existing decking in good shape, exposed-fastener panels, and no structural repair. What pushes it up: a complex roof with multiple valleys and dormers, standing seam with premium finish, decking replacement, and any structural corrections discovered during tear-off. What’s included in a written estimate: tear-off, disposal, underlayment, panels, trim, flashing, and permit. What’s typically not included unless specified: decking repair beyond a small allowance, and any structural work discovered mid-job. We put all of it in writing before the first day.
See the difference
Before
After
Before
After
Before
AfterWhat Artesia Homes Specifically Do to This Job
Artesia’s housing stock changes how a metal roof gets installed. Most homes here are 1950s – 1960s single-story tract houses on small lots, and many have later additions or enclosed patios that were never permitted. Before we order a single panel, a walkthrough often turns up phantom square footage that affects the roof’s footprint and structural plan. That’s the reality of working in a dense city under a permitting office with strict plan-check reviews. We factor that in from day one. The older homes also mean pre-1978 lead-safe handling applies on some jobs, and we plan for it. Climate-wise, Artesia sits in the coastal basin with mild, dry weather most of the year, but the winter rain bursts are intense enough that older drainage and low-slope patio roofs struggle. A metal roof installation is a good time to correct drainage and know the roof will shed water fast. Homeowners often pair this with Window Replacement in Artesia or Impact Windows & Doors in Artesia to tighten the whole envelope, and some fold it into a larger Roofing in Artesia scope. If you’re working through a full remodel, our Roofing service handles the broader envelope work. We cover all of Artesia, ZIP codes 90702 and 90701.
Serving Artesia, CA – Our Local Coverage Area
We serve Artesia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Artesia

The installation itself takes 3 to 6 working days on a typical Artesia home, with plan-check through the city adding roughly 2 to 4 weeks before work begins. Timeline depends on roof size and complexity, plus any decking repair discovered during tear-off. Call (888) 255-8179 for a realistic timeline on your roof.
Yes. Metal roofing requires a permit through the city of Artesia, and plan-check here is known for being thorough, which is why we build that review time into every schedule. We pull the permit and handle the inspection. Call (888) 255-8179 for a free estimate that includes permit costs.
Usually yes. Metal roofing is a roof surface replacement, so plumbing vents and structural framing stay put unless we find rot or a code issue during tear-off. On older Artesia homes with unpermitted past work, we may find a structural issue that needs correction before panels go on. We flag it in writing before touching it. Call (888) 255-8179 to schedule a walkthrough.
Most metal roofing in Artesia falls between $15,000 and $40,000, with standing seam at the higher end and exposed fastener at the lower. Decking repair, roof complexity and finish choice are the biggest movers. Call (888) 255-8179 for an exact quote on your roof – estimates are free.
Workmanship is covered by our 730-Day Done Right Promise, and the panels carry their own manufacturer warranty on finish and material. Both are documented in writing before we start. Call (888) 255-8179 to go over the specifics for the system you’re considering.
Get a Free Metal Roofing Estimate in Artesia
Call (888) 255-8179 for a free on-site estimate on metal roofing in Artesia. We’ll walk the roof, check the decking, talk through standing seam versus exposed fastener, and hand you a written line-item quote with no change orders and no surprises. A live person answers the phone, and a background-checked technician shows up in uniform at the scheduled time. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.












