







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Cerritos, CA: What It Takes and What It Costs
Metal roofing in Cerritos, CA runs $15,000 – $40,000 installed for most single-family homes, and a full tear-off and re-roof typically takes 4 – 7 working days once permits clear. The job means stripping the old shingle or shake, inspecting and reinforcing the sheathing, then installing standing-seam or metal panels with new underlayment and edge metal. Before you commit, you have to clear the city’s architectural review. Call (888) 255-8179 for a free on-site estimate.
How the Job Runs, Start to Finish

Metal roofing isn’t a two-day flip. Here’s the sequence we follow, staged so you always know what’s happening and what you need to sign off on.
Day 1 – Permit and pre-construction walk. Before we order a single panel, the scope, panel profile, and color go to the city for permit and design review. In Cerritos that step is slower than in neighboring cities, so we start it early. You confirm the color and profile now, because changing it later means a resubmittal.
Days 2 – 3 – Tear-off and deck inspection. The old roof comes off down to the sheathing. We photograph the deck, check for soft spots, and replace any rotted fascia or sheathing before anything goes back on. On 1970s and early ’80s tract homes, it’s common to find a layer or two of old shingles that has to come off first.
Days 3 – 4 – Underlayment, flashing, and edge metal. A synthetic or peel-and-stick underlayment goes down, then drip edge, valley metal, and penetration flashing. This is the part you never see once the panels are on, and it’s where most long-term leaks begin. You don’t make decisions here; we just keep you posted.
Days 4 – 6 – Panel installation. Standing-seam panels are rolled and set along the eave, fixed with concealed clips, and run up the slope. Ridge caps and closures go on last. For a screw-down panel system, expect a slightly quicker install but visible fasteners you’ll want to inspect at the screws with us.
Day 6 – 7 – Final inspection and walkthrough. We meet the city inspector, then walk the roof with you and document the finished job in writing. Your coverage is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Metal roofing isn’t one product. The panel system, gauge, finish, and color you pick decide how the roof looks, how quiet it is, and what it costs.
- Standing seam vs. exposed fastener. Standing seam hides the fasteners and holds up best against wind uplift and our dry, windy summers; it’s the pricier choice. Exposed-fastener panels cost less but the screws need periodic checking.
- Steel vs. aluminum. Steel with a quality coating resists dents and fire and is the common pick for residential. Aluminum resists corrosion better in coastal-influenced air; it’s lighter and costs a bit more.
- Panel gauge. Heavier gauge resists oil-canning (the wavy look) and impact from tree limbs. Lighter gauge is cheaper but shows dents on a low-slope run.
- Finish and color. Factory-baked finishes hold color for decades; in Cerritos the color also has to pass architectural review, so check approved palette before you fall in love with a shade.
- Insulation and sound. A solid underlayment plus insulation keeps rain noise down and improves comfort. Worth the add if your primary bedroom sits under the roof.
Naming two brands you’ll likely run across: CertainTeed for metal systems and accessories, and GAF for underlayment and deck protection. We’ll show you samples in person so you’re choosing on the roof, not on a screen.
What Metal Roofing Costs in Cerritos, CA

For a typical single-family home here, budget $15,000 – $40,000. That’s the full installed range, including tear-off, deck repair, underlayment, panels, flashing, and permits. A simple single-story with a straightforward gable sits near the low end; a steep, cut-up roof over a two-story with complex valleys pushes toward the top.
Five things move the number:
- Roof size and pitch. More square footage and steeper slopes mean more panels, more labor, and more safety rigging.
- Existing roof condition. One layer of old shingle tears off clean; three layers and rotted sheathing add cost and time.
- Panel system and gauge. Standing seam with concealed fasteners runs higher than exposed-fastener panels.
- Deck repairs. Soft sheathing, rotted fascia, or a needed re-nail add line items you won’t know about until tear-off.
- Permit and design review. The city’s review process in Cerritos is exacting, so permit scope matters.
Your written estimate will list each of those lines, so the number you see is the number you pay – no surprise change orders after the crew starts. Call (888) 255-8179 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Cerritos Homes Specifically Do to This Job
Cerritos is a fully built-out, master-planned city. Nearly every lot was developed between the late 1960s and 1990s under strict planned-unit-development standards, which means we’re almost always re-roofing aging tract homes and planned-community houses rather than new builds. That changes the work in two real ways.
First, the design review. Because the city runs one of LA County’s most exacting permit and design-review processes, a metal roof here has to clear the architectural rules before the panels ship. Color and panel profile are the usual sticking points – several neighbors around the Cerritos Town Center area have had to redo schemes that didn’t match the original tract palette. We submit your color and profile for review up front so you don’t find out after installation.
Second, the climate. Long, dry summers and hot Santa Ana wind events dry out old stucco and shake, so roof edges and sheathing here often need more repair than expected on tear-off. Under the PUD rules, we handle the permit and inspection side so a plan reviewer can’t stall your project. This is part of the wider Roofing in Cerritos work we do, and it’s a genuine local hurdle for contractors who don’t know the city.
Serving Cerritos, CA – Our Local Coverage Area
We serve Cerritos and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Cerritos

Plan on 4 – 7 working days of on-roof work plus a week or two for permit and design review before we start. The city review timeline is what sets your actual start date, not the crew’s schedule. Call (888) 255-8179 and we’ll give you a realistic calendar.
Yes. A re-roof in Cerritos requires a permit plus architectural review, and the panel color and profile have to pass before installation. We pull it and handle the inspection, so you’re not the one chasing the city. Call (888) 255-8179 to start the paperwork with us.
We tear off to the deck for a proper install. It takes longer but lets us inspect the sheathing and fix soft spots before they become panel leaks. Call (888) 255-8179 for an estimate that covers the full tear-off.
Not always – that’s why we check the approved palette before ordering. We submit the panel profile and finish for design review and adjust if the city pushes back, so you avoid a violation. Call (888) 255-8179 and we’ll review the options with you.
Every job is backed by our 730-Day Done Right Promise on workmanship, alongside the manufacturer’s finish warranty. Our technicians have up to 12 years of experience, and we put the coverage in writing. Call (888) 255-8179 for the details.
Get a Free Metal Roofing Estimate in Cerritos
If a metal roof is on your short list, start with a free on-site estimate. We’ll inspect the deck, check the pitch and existing layers, hear your design-review concerns, and hand you a written line-item quote with the panel options laid out. No pressure, no guesswork. Call (888) 255-8179 – a live person answers around the clock – and we’ll set a time to walk your roof together.
Written by the team at Groundwork Construction Co. of Downey.












