







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Gutters & Accessories in South Whittier, CA: What the Job Actually Involves
Gutters & Accessories work in South Whittier usually runs $1,200 – $4,800 for a full seamless aluminum run on a typical 1940s – 60s single-story, and most jobs are done in one to two days. Replacement of one damaged section with new hangers and a downspout lands closer to $400 – $900. Call (888) 255-8179 with your address and we’ll set a free on-site estimate, usually within a few business days. Gutters on South Whittier’s older homes are a different problem than on newer builds, and the estimate reflects that.
How We Run a Gutter Job on an Older South Whittier Home, Start to Finish

Old gutters fail at the fasteners and the fascia long before the metal wears out. That reality shapes the whole sequence, and it’s why we don’t quote from a photo.
Day 1, morning: on-site measure and roofline inspection
We walk the roofline with a level and check the fascia board behind the old gutter. On 1940s – 50s South Whittier tract homes, that board is often original wood that’s taken fifty-plus years of water, and soft spots change the scope. You get the number before anyone touches the house.
Day 1, midday: demo and fascia prep
Old hangers come off, damaged fascia gets cut back and replaced with primed lumber. If the drip edge is bent or rusted, we straighten or replace it. Your decision here is whether to replace fascia or sister new wood to what’s there, and we show you the difference in price.
Day 1, afternoon: gutter fabrication on site
Seamless aluminum is roll-formed to length on the driveway, which matters on these long single-story runs. You pick the profile (K-style is the workhorse; half-round suits certain period homes) and the color. Factory-baked finish in a color close to your stucco is standard.
Day 1 or 2: hang, pitch, and fasten
We hang with hidden hangers screwed into the fascia, not spikes, and set pitch toward the downspouts. On a 60-foot run we use one downspout per 30 feet minimum. You choose downspout placement and whether to add leaf guards now or later.
Day 2: water test and walkthrough
We run a hose down each run and watch the discharge at the splash block or hardpipe outlet. Any low spot gets re-pitched before we leave. You get a written rundown of what we installed, the material warranty paperwork, and the 730-Day Done Right Promise covering our workmanship.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make: Material, Profile, and Accessories
- Seamless aluminum (0.027″ or 0.032″): The standard for South Whittier. Light, rust-proof, holds paint well in our dry summers, and formed on site so there are no failing seams. The heavier gauge costs more and holds up better to ladder bumps and Santa Ana wind loads.
- Steel (galvanized or painted): Sturdier in wind, but it rusts at cut edges and scratches. Worth it only where tree limbs drop regularly.
- Copper: Beautiful on a period 1940s home, ages to a patina, and lasts decades. It’s the premium pick and costs meaningfully more per foot than aluminum.
- Leaf guards: Mesh screens keep eucalyptus and ficus debris out. Screen-style is the practical choice on our tree-lined lots; solid covers cost more and can be fussy on shallow-pitch roofs.
- Downspout configuration: Pop-up emitters, buried hardpipe to the street, or rain barrels. Buried runs cost more but keep water away from the foundation on these older slabs and stem walls.
Homes here often pair the gutter work with other exterior upgrades. If your project is part of a full Roofing in South Whittier job or you’re adding a patio cover, tell us at the estimate so the fascia and trim match.
What Gutters & Accessories Cost in South Whittier, CA

Most full seamless aluminum replacements in the 90605 ZIP run $1,200 – $4,800, with single-section repairs at $400 – $900. The number moves on four things: linear footage, fascia condition, material grade, and whether you add guards or buried downspouts.
| Line item | Typical range |
|---|---|
| Seamless aluminum, per linear foot | $6 – $14 |
| Fascia board replacement, per linear foot | $8 – $20 |
| Downspout, per run | $75 – $200 |
| Leaf guard, per linear foot | $6 – $18 |
| Single-section repair | $400 – $900 |
Our written estimate lists the footage, gauge, color, downspout count, and any fascia replacement line-by-line, and the price you sign is the price you pay. What’s not typically included: rotted sheathing under the drip edge (we flag it and quote it before proceeding), buried drainage lines past the yard, and any roof repair the gutters expose. That last one is why we sometimes bring in our roofing service to fix a loose shingle or flashing before the new gutter covers it.
See the difference
Before
After
Before
After
Before
AfterWhat South Whittier’s Housing Stock Does to a Gutter Job
South Whittier is an unincorporated pocket of mostly 1940s – 60s single-story stucco tract homes, and the fascia here is old enough that we plan for replacement on maybe half the jobs. Because it’s unincorporated, permits for any structural work go through LA County Public Works rather than a city building department, so inspection scheduling has its own rhythm. Gutter replacement itself usually doesn’t need a permit, but if the fascia work ties into a structural repair or an addition, that does, and we handle it. On the shaded lots near the Whittier Greenway Trail and along streets like Lambert and Leffingwell, we see a lot of eucalyptus and ficus debris packing the troughs, which is why we push mesh guards harder here than we would on a bare lot. Hot, dry summers and Santa Ana wind events also loosen hangers over time, so we screw into the fascia rather than driving spikes; the wind here works spikes loose within a few seasons.
Serving South Whittier, CA – Our Local Coverage Area
We serve South Whittier and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Gutters & Accessories in South Whittier

Most full replacements on a single-story South Whittier home take one to two days. Seamless runs are formed on site, so the timing depends on footage and how much fascia needs replacing rather than on ordering. Call (888) 255-8179 for an estimate and we’ll give you a realistic window for your address.
Gutter replacement alone generally doesn’t require a permit in unincorporated LA County. If the job uncovers structural fascia or sheathing damage that ties into a repair or addition, that work needs a permit through LA County Public Works, and we pull it and pass inspection before we finish. The written estimate tells you which category your job falls into.
Yes, in most cases the old gutter and hangers come off and new ones go onto the existing fascia with no roof work at all. The exception is a damaged drip edge or soft fascia board behind the old run, which needs addressing before the new gutter will hold. We show you that before we quote it.
A single damaged section with new hangers and a downspout typically runs $400 – $900. Full replacement lands at $1,200 – $4,800 depending on footage, gauge, guards, and fascia condition. Call (888) 255-8179 for a free on-site estimate; the number you see is the number you pay.
The workmanship is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. The gutter material itself carries its manufacturer warranty, and you get the paperwork in writing at the walkthrough. We’re a licensed, insured team, and the estimate spells out exactly what’s covered.
Get a Free Gutter Estimate in South Whittier
If your gutters are pulling away, overflowing at the corners, or the fascia behind them is soft, get a written estimate before the next rain season. Call us at (888) 255-8179 and a live person answers, any hour, any day. We’ll schedule a free on-site visit, measure the roofline, and hand you a line-item quote with no surprises. Most jobs are done in a single visit.
Written by the team at Groundwork Construction Co.












