







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Cerritos, CA: What They Cost and How Approval Works
Custom & Geometric Windows in Cerritos usually run $8,000 – $25,000 installed, with most arch-top, radius, angled-bay and trapezoid projects landing near the middle of that range once glass package and trim are chosen. Figure two to four weeks from template to installation, plus whatever time the city’s design review adds. Every opening is built to the actual rough opening we measure on site, because in Cerritos a factory-stock shape almost never fits the original tract framing. Call (888) 255-8179 with your window count and we’ll walk you through what’s realistic before anyone measures.
How a Geometric Window Project Actually Runs Here

There’s no shelf product to order, so the sequence matters more than it does on a standard replacement. Here’s the path we follow, stage by stage.
Stage 1: Measure and template (day 1)
We pull every opening’s true dimensions, check whether the existing frame is square, and photograph the interior trim and exterior stucco detail. On an arched or angled unit, the radius or angle gets templated directly against the opening rather than pulled from the original drawings. You decide at this stage which openings are truly custom and which can be built from a modified stock unit. That one decision is the biggest cost lever on the whole job, so we settle it before anything is ordered.
Stage 2: Design review and permit path (days 2 – 10)
Cerritos runs exterior changes through design review, and a new shape or profile is exactly the kind of change that gets flagged. We put together the elevation drawings and product specs the plan check needs, and confirm whether your community’s architectural review body wants its own submittal, often with a color and profile sheet. You approve the final drawings and the material call at this point. We don’t order glass until the drawings are settled, because a shape change after fabrication is money in the dumpster.
Stage 3: Fabrication and shop confirmation (weeks 1 – 3)
Custom shapes go into production, and we confirm the glass package, spacer type, and finish before the cut. Any change to the radius, the frame color, or the grid pattern has to land in this window. It’s also when we stage the job around weather and access, since a wide arched unit over an entry needs a second pair of hands and a clear driveway.
Stage 4: Removal and prep (day 1 of install)
We protect floors and furniture, pull the old unit, inspect the rough framing and flashing, and repair any rot in the header or sill before the new frame goes in. On original-era stucco we cut back cleanly and plan the patch so the finished exterior reads continuous. Most single custom units run a full day; a whole-house set of shapes runs three to four.
Stage 5: Install, seal, and final walkthrough (same week)
The new unit sets, gets shimmed and leveled, and is flashed, sealed, and trimmed. We run the operable hardware, confirm the screen or grille alignment, and do a water test around the perimeter before we patch and paint. The walkthrough covers operation, cleaning, and the written warranty. Call (888) 255-8179 when you’re ready to start the measuring clock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make on a Custom or Geometric Unit
The shape gets the attention, but the material and glass package drive how the window performs and how long it lasts in this climate.
- Wood-clad frames: the friendliest match for original tract detail, and the easiest to paint to a community palette. Higher cost and more upkeep on the exterior face. Andersen and Marvin both make radius and arch units that hold their shape over decades.
- Vinyl: the budget-friendly choice for a shape that isn’t highly visible. Limited on tight radii and can’t be repainted to match a custom exterior color as easily.
- Fiberglass: strong dimensional stability for large arched units that would otherwise sag or rack. Costs more than vinyl, less than clad wood, and takes paint well.
- Glass package: dual-pane with a low-E coating and argon fill handles the long dry summers here. Tempered glass is required in many geometric units because of size and sill height, and that adds to the price.
- Grid and trim profile: a simulated divided lite versus a true divided lite changes both the look and the lead time. The trim profile should match what’s already on the elevation, or design review will ask you to.
We keep the material conversation tied to your actual elevation so the unit you pick is one the community will approve.
What Custom & Geometric Windows Cost in Cerritos, CA

The installed number for Cerritos lands between $8,000 and $25,000 for a set of custom shapes, with a single arched unit starting around the low end and a whole-house mix of arches, angles, and trapezoids pushing toward the top. That’s a shape-and-glass number, not a stock replacement number, so don’t compare it against a standard window quote.
Five things move it:
- Shape complexity: a simple half-round costs far less than a multi-point arch or a trapezoid because of the glass cutting and the frame joinery.
- Size: a large arched unit over an entry needs heavier glass and more framing, and sometimes a header repair behind it.
- Existing condition: rot in the sill or header, or stucco that needs a full patch, adds labor and materials.
- Material grade: clad wood and fiberglass sit above vinyl on the price ladder.
- Permit scope: a single opening on a like-for-like basis may not need a full permit, but a new shape or a size change does, and that review and inspection time is real cost.
A written estimate covers the window unit, removal, flashing and sealant, trim, and the patch work we’ve scoped. It typically does not cover interior painting, structural repair beyond what’s visible once the unit comes out, or a change to the shape after fabrication. The number you see is the number you pay on the scope we document.
See the difference
Before
After
Before
After
Before
AfterWhat Cerritos Homes Specifically Do to This Job
Cerritos is fully built out, so essentially every lot here was developed between the late 1960s and the 1990s under planned-unit-development standards. There’s no vacant land to build on. That means custom window work here is nearly all remodel and retrofit on aging tract homes, and it runs through one of LA County’s most exacting design-review processes. That combination is what separates Cerritos from Norwalk or La Mirada.
The design review piece is the one that catches contractors from out of town. Even a new profile or a repaint scheme that reads differently from the original tract palette can require approval, so a geometric window that changes the look of an elevation will get attention. We build the submittal to match your community’s approved styles and colors before the order goes in. On the construction side, the original-era homes often carry original stucco and shake, so we cut back and repatch to keep the exterior reading continuous. The 605/91 interchange area and its surrounding tract homes are where we see most of this. A lot of these homes have original window framing that’s racked slightly, so a templated arch made to the opening, not the drawing, is what actually fits.
Homeowners sometimes pair this work with a larger exterior refresh. If the stucco patch turns into driveway repair, that’s Concrete Driveways & Concrete Work in Cerritos, and when an older asphalt drive needs a face-lift after the project, Asphalt Driveways & Resurfacing in Cerritos covers that. The wider window scope, including our windows & doors service, sits one level up. You can see how we cover Cerritos, or step back and browse Windows & Doors if you’re still mapping the whole plan. When this is part of a full Windows & Doors in Cerritos project, we sequence it so the exterior patch and the interior trim land in the right order.
Serving Cerritos, CA – Our Local Coverage Area
We serve Cerritos and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in Cerritos

Typically two to four weeks from template to installation, plus the design review timeline. Fabrication of a radius or trapezoid unit is the long pole, and any shape or finish change restarts it. Call (888) 255-8179 and we’ll give you a realistic date for your specific openings.
Yes, in almost every case where the shape or size changes the opening. Cerritos runs exterior changes through design review and plan check, and a new geometric window profile is exactly the kind of change that gets looked at. We handle the submittal and confirm the inspection schedule. That’s what keeps the job moving without a correction notice.
Usually yes, if the opening’s rough dimensions already accommodate the new unit. If the new shape is larger or moves the frame line, the header and surrounding framing come into it, and that changes the scope. We confirm this at the measuring stage. It’s the single question that shifts a job most, so it gets answered before the drawings go out.
$8,000 – $25,000 installed for a set of custom shapes, with a single half-round much lower and a full house of arches, angles and multi-point units at the top. Glass package, material grade, and any framing repair move the number. Call (888) 255-8179 for an exact quote; estimates are free.
No, on the scope we document in writing. The exception is hidden rot or framing damage found after the old unit comes out, which we photograph and quote before doing the extra work. That’s the only time a change order is real. Finishes like Kohler or Delta hardware in adjacent rooms, or paint to match an approved palette, get quoted upfront and locked in.
Ready to Price It?
We’ll come out, measure each opening, and hand you a written line-item estimate for your custom & geometric windows in Cerritos, with the shape, glass, and trim spelled out so there’s no guessing. The design review path and the permit scope get laid out in the same visit. Call (888) 255-8179 for a free estimate, and we’ll schedule a time that works around your day.
Written by the team at Groundwork Construction Co.












