







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Lakewood: What the Job Actually Involves
Backsplash, Tile & Flooring work in Lakewood usually means replacing a worn kitchen backsplash, laying new floor tile, or both, and most jobs run 2 – 5 days of on-site work. Budget $800 – $2,500 for a backsplash alone, or up to $14,000 – $45,000 when the tile and flooring are part of a larger kitchen overhaul. Call (888) 255-8179 to schedule a free on-site estimate.
Here’s the honest version: tile work is one of the few trades where the prep you can’t see decides whether the job looks right in five years. We build every estimate around that.
How We Sequence Backsplash & Tile Work, Day by Day

The order matters more than most homeowners expect. Here’s how a typical kitchen backsplash and floor tile job runs in a Lakewood home, stage by stage.
Stage 1: Site check and demo (day 1, roughly 4 – 6 hours)
We protect counters and cabinets, shut off the circuits feeding the backsplash outlets, and pull the old material. On 1950s Lakewood tract homes this is where we learn the truth: sometimes there’s drywall behind the old tile, sometimes it’s original gypsum lath that crumbles on contact. You’ll decide at this point whether to replace the substrate (recommended) or patch it.
Stage 2: Substrate and prep (day 1 into day 2)
New cement backer board goes up on the walls, and floor tile gets a self-leveling underlayment if the slab has dips. Flat is the whole game. We check the floor for level with a straightedge across the room, because a 1/8-inch dip over an 8-foot run will telegraph through large-format tile. This is the stage that adds a day when the existing floor has old vinyl, adhesive, or a second layer of tile underneath.
Stage 3: Layout and dry-fit (day 2, 2 – 3 hours)
You’ll sign off on the layout before the first tile is set. Where do the grout lines land relative to the sink, the range, the window? Do you want the backsplash tile to run behind the outlets or cut around them? Full-height backsplash, counter-height, or up to the underside of the upper cabinets? This is the decision point that most affects how the finished kitchen reads.
Stage 4: Setting tile and grouting (days 2 – 4)
Floor tile typically goes down first, then backsplash, so nobody’s walking on fresh grout. Thinset cure runs 24 hours before grout, and grout cures another 24 before sealing. For a 40-square-foot backsplash and a 120-square-foot kitchen floor, plan on three working days. A larger floor or a herringbone pattern adds a day or two.
Stage 5: Sealing, caulk, and walkthrough (day 4 – 5)
We seal natural stone, caulk the counter-to-tile joint with flexible silicone (not grout, which cracks), reinstall outlet covers, and walk the job with you. Anything on the punch list gets fixed before we leave. Every Groundwork job is covered by our 730-Day Done Right Promise, so if grout cracks or a tile lifts, we come back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions on this job come down to material and format. Here’s what actually matters, with the trade-offs stated plainly.
- Ceramic vs. porcelain tile. Ceramic is softer, easier to cut, and runs less per square foot; porcelain is denser, more water-resistant, and holds up better on a busy kitchen floor. For a backsplash, ceramic is fine. For floors, we usually steer toward porcelain.
- Large-format vs. subway. Subway tile (3×6) is forgiving on imperfect walls and cheaper to install. Large-format (12×24 and up) looks cleaner but demands a flatter substrate and costs more in labor because every cut is heavier and less forgiving.
- Grout: sanded vs. unsanded, and epoxy. Sanded grout for joints 1/8 inch and wider; unsanded for tight joints. Epoxy grout resists staining but costs significantly more and is unforgiving to install. In a kitchen that sees heavy cooking, epoxy is worth considering on the backsplash behind the range.
- Natural stone vs. manufactured. Marble and travertine bring real character but need sealing every 12 – 18 months. Porcelain that mimics stone gets you the look with less upkeep. Honest trade-off: stone ages with you, porcelain stays uniform.
- Fixture finishes. If you’re replacing the sink or faucet while the counter is open, this is the time. A Blanco sink paired with a Delta or Moen faucet is a common combination we install alongside tile work, and matching the finish to the new backsplash is easier before the tile is set.
If the tile work is one piece of a wider project, it’s often part of a full Kitchen Remodeling in Lakewood, and we sequence the tile so it doesn’t hold up cabinets or countertops.
What Backsplash, Tile & Flooring Costs in Lakewood, CA

Backsplash installation in Lakewood runs $800 – $2,500 for a standard kitchen, and floor tile installation adds roughly $6 – $18 per square foot depending on material and pattern. When the work is folded into a larger kitchen scope, the total typically lands in the $14,000 – $45,000 range for a full kitchen remodel.
| Line item | Typical Lakewood range |
|---|---|
| Backsplash installation | $800 – $2,500 |
| Floor tile installation (per sq ft) | $6 – $18 |
| Substrate / backer board replacement | Added to base quote |
| Full kitchen remodel (tile included) | $14,000 – $45,000 |
What pushes a job toward the high end? Four things, mainly:
- Square footage and pattern. A 30-square-foot backsplash is a two-day job; a 60-square-foot full-height backsplash in a herringbone pattern is double the labor.
- Existing condition. Old vinyl or a second tile layer under the floor means extra demo and disposal. Original 1950s substrate often needs full replacement, not patching.
- Relocating plumbing or electrical. Moving an outlet for a new backsplash layout or shifting a sink is a separate trade and adds cost and permitting.
- Material grade. Builder-grade ceramic versus imported porcelain or natural stone can swing material cost by hundreds of dollars on the same square footage.
What’s in a written estimate: demo, substrate prep, thinset and grout, sealing, caulk, disposal, and a line-item material allowance. What’s often not: plumbing or electrical relocation, structural repairs found behind the wall, and HOA or permit fees where applicable. We write those out separately so there are no change-order surprises. Call (888) 255-8179 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Lakewood Homes Specifically Do to This Job
Almost every kitchen we tile in Lakewood sits inside a 1950s tract house, and that changes the job in predictable ways. Most of these homes came out of the same handful of floor plans built between 1950 and 1955 – wood-frame stucco on a concrete slab, three bedrooms, one bath, around 1,100 square feet. When you pull the old backsplash off a kitchen in the Lakewood Park or Mayfair areas, you’re working against 70-year-old walls that have shifted with the slab and dried out through decades of hot, dry Santa Ana wind cycles and a marine layer that keeps moisture cycling through the stucco.
Three things come up again and again. Original drywall or gypsum lath behind the old tile is often soft or delaminating and needs to be cut out and replaced with cement backer board – a cost the initial walkthrough won’t always reveal. The slab under the kitchen floor is rarely perfectly flat after seven decades, so a self-leveler pour is common on floor tile jobs where large-format tile is going down. And because these homes share the same slab and framing plan block after block, a prep approach that works on one kitchen usually transfers cleanly to the next. We cover Lakewood across ZIP codes 90712, 90714, and 90715, so we see the same substrate issues repeatedly.
The good news is that the deeper structural problems (original clay sewer laterals under the slab, for example) usually live outside the kitchen footprint. If your tile work is part of a bigger project, our Kitchen Remodeling service covers the full scope. Homeowners often pair this with a Vanities, Tile & Fixtures in Lakewood job in the bathroom, or a Tub-to-Shower Conversion in Lakewood if they’re updating both rooms at once.
Serving Lakewood, CA – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Lakewood

A standard kitchen backsplash takes 2 – 3 days, and adding floor tile brings the total to 3 – 5 days of on-site work. Demo, substrate prep, and cure times drive most of the schedule. A large-format floor or a complex pattern can stretch to a week.
Tile work itself usually doesn’t require a permit, but if the job includes relocating plumbing or electrical, or any structural change, permits are required and inspections apply. We pull them where needed and can explain exactly what your scope triggers before the job starts. Call (888) 255-8179 with your scope and we’ll tell you straight.
Yes, in most cases. Backsplash and floor tile can be installed with existing cabinets and plumbing left in place, which is the lower-cost path. The exception is when the old substrate needs full replacement behind the cabinets, or when the layout requires relocating an outlet.
Backsplash installation in Lakewood runs $800 – $2,500 for a standard kitchen. The low end covers builder-grade ceramic tile with existing substrate; the high end covers imported stone or porcelain, full substrate replacement, and full-height installation. Floor tile adds $6 – $18 per square foot.
Every Groundwork backsplash, tile, and flooring job is covered by our 730-Day Done Right Promise. If grout cracks, a tile lifts, or the install isn’t right, we come back and make it right. Your written estimate spells out the coverage before any work begins.
Get a Free Estimate for Backsplash, Tile & Flooring in Lakewood
Schedule a free on-site estimate for Backsplash, Tile & Flooring in Lakewood by calling (888) 255-8179. A live person answers around the clock. We’ll measure the space, check the substrate, walk you through material options, and leave you with a written, line-item quote so you know exactly what you’re paying for. Calls are answered 24/7, estimates are free, and projects over $10,000 qualify for our $1,000 discount.
Written by the team at Groundwork Construction Co.












