







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Door Replacement in Lakewood, CA: What It Takes
Replacing a sliding or patio door in Lakewood usually runs $2,400 – $7,800 installed, takes one to two days once materials arrive, and starts with a two-week ordering window on most stock sizes. If you’re standing in a 1950s tract home looking at a door that sticks, fogs, or won’t latch, the honest answer is that the door isn’t the whole story. Call (888) 255-8179 and we’ll come measure it.
How We Run a Sliding & Patio Door Job, Stage by Stage

Every job starts with a real measurement visit, not a phone quote. Sliding doors live or die on the rough opening, and on a Lakewood slab home that opening has had 70 years to move. Here’s how the work actually sequences.
Stage 1: Measure and inspection (45 – 60 minutes, day one visit). We pull the interior trim, check the rough opening for square and plumb, and look at the sill pan and the framing behind the stucco. We also note whether the wall above is load-bearing and how the door sits against the original 2×4 roof framing. You decide at this stage: sliding or hinged, and whether the opening stays the same size or changes.
Stage 2: Options set and order placed (one meeting, roughly an hour). You pick the material, glass package, finish color, and hardware. This is where most of the price gets decided. We write a line-item quote and lock the number. Stock sizes ship in about two weeks; custom sizes and non-standard colors run four to six weeks.
Stage 3: Prep and demo (three to four hours). On install day we lay drop cloths, pull the old door and trim, and cut back the stucco only as far as the nailing fin needs. On Lakewood homes that’s often the trickiest part – the original stucco is hard and brittle, and we cut it clean so the patch and color match stays tight against that uniform mid-century face.
Stage 4: Setting, flashing, and sealing (four to six hours). The new door goes in level and plumb, the fin gets integrated flashing, the sill gets a waterproof pan, and the whole assembly gets sealed and finished inside and out. We check operation and lock engagement before anything gets closed up.
Stage 5: Walkthrough and cleanup (30 – 45 minutes). We demonstrate the door, hand you care instructions, and haul everything away. If any inspection is required, we coordinate it before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decision comes down to four categories. Here’s the honest trade-off on each, without the sales gloss.
- Door material – vinyl vs. aluminum vs. fiberglass. Vinyl is the value pick and holds up well in Southern California; it’s the lightest of the three and costs the least. Aluminum is thinner-profile and takes a beating in the heat, but it transfers temperature and can feel cold to the touch. Fiberglass looks the most like wood and holds paint, and it runs toward the top of the range. On a Lakewood stucco wall, vinyl and fiberglass both blend cleanly.
- Glass package. A single-pane unit keeps the original look but fails the thermal test, condenses in the marine-layer months, and does little for a noisy street. A dual-pane low-E unit costs more but cuts heat gain and summer glare noticeably, which matters in a home with hot, dry Santa Ana wind events pushing at the glass.
- Sliding vs. hinged. Sliding saves floor space and doesn’t swing into a small living room, which suits a ~1,100 sq ft tract plan. A hinged French door gives a wider clear opening and a better seal, but you need the room to swing it. Multi-panel and pocketing systems sit at the high end and want a bigger frame.
- Finish and hardware. Standard colors cost less and ship faster. A non-standard finish or a premium track and handle package pushes both cost and lead time. Your Windows & Doors in Lakewood project may fold this door work into a larger scope – we’ll show you how the door choice lines up with the rest of it.
What Sliding & Patio Doors Cost in Lakewood, CA

Most single-door replacements here land between $2,400 and $7,800 installed. A bigger or multi-panel opening pushes past that. These are the numbers we quote with, not a teaser range.
| Line item | Typical cost in Lakewood |
|---|---|
| Standard vinyl slider, dual-pane, same opening | $2,400 – $4,200 |
| Fiberglass or premium aluminum slider | $3,800 – $6,500 |
| Hinged / French door, single | $3,200 – $6,000 |
| Multi-panel or pocketing system | $6,000 – $12,000 |
| Enlarging the opening (header, framing, stucco patch) | +$1,500 – $4,500 |
| Permit and inspection coordination | $250 – $650 |
Four things push a job toward the high end. The size and configuration of the opening is the biggest. The existing condition matters just as much – a wall that’s out of square, rotted framing, or a failing sill adds labor nobody can see from the curb. Glass and finish grade are the third. Whether the opening changes size brings a header and stucco patch into the job and, with them, a permit. A clear, ready opening with a stock-size door is your low end; a custom size in an out-of-square wall is your high end.
Our written estimate lists the door, the labor, the flashing and finish, permit coordination if needed, and haul-away. It doesn’t include hidden framing rot or a stucco patch beyond the standard cut; we flag those before we start so there are no change-order surprises. Our windows & doors pricing works the same way across every job.
See the difference
Before
After
Before
After
Before
AfterWhat Lakewood’s Housing Stock Does to This Job
Lakewood was built fast, almost entirely between 1950 and 1955, as one of America’s first planned communities. Nearly every home in the 90712, 90713, 90714, and 90715 ZIPs is the same three-bed, one-bath, ~1,100 sq ft tract house: wood-frame stucco on a concrete slab, attached garage, original roof framing, and original single-pane windows. That uniformity is exactly why door work here is predictable – and why we measure every opening anyway. The door that fits one block’s tract home usually fits the next, but the 70-year-old slab and framing plan has had decades to shift a quarter inch one way or another.
We see the same failure modes over and over. The original sliders were built for a climate that no longer exists on the glass side: hot Santa Ana wind events dry out and twist the old wood framing, the marine layer cycles coastal moisture through the stucco and the single-pane units, and the tracks corrode and stop rolling. The result is a door that sticks in June and whistles in January. Replacing it is a retrofit to modern code and energy standards, done without changing the street face that gives Lakewood its identity. Because every house on the block shares the same 1950 plan, a fix that works on one home almost always works on the next.
Work across this city is what we do. From the tract streets off Del Amo Boulevard to the blocks near Mayfair Park, this is the Lakewood housing we retrofit. Homeowners often pair the door work with Fence Repair in Lakewood while the stucco tools are already out, or with Paver Driveways in Lakewood when the yard is getting a rework at the same time.
Serving Lakewood, CA – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in Lakewood

The install itself is one to two days once materials arrive, with stock sizes shipping in about two weeks and custom sizes in four to six weeks. Call (888) 255-8179 for a firm timeline on your door.
A like-for-like replacement in the same opening usually doesn’t require a permit, but changing the opening size, adding a header, or altering the structural framing does. We’ll tell you exactly which side of that line your job falls on before any work starts, and we handle the permit coordination when it’s needed.
Yes, in most cases a standard-size replacement keeps the opening and the wall untouched. If you want a wider opening or a different door type, a header and stucco patch come into the scope, and that’s when the price rises.
Most jobs land between $2,400 and $7,800 installed, with multi-panel systems going higher. Call (888) 255-8179 for an exact quote – estimates are free.
Every door we install is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. Call (888) 255-8179 to schedule your free estimate.
Get a Free Sliding & Patio Door Estimate in Lakewood
Call (888) 255-8179 and a live person answers, 24 hours a day. We’ll set a free on-site measurement for your sliding or patio door in Lakewood, look at the wall and the opening, and hand you a written line-item quote with the number locked in. No pressure and no vague pricing. Our technicians have up to 12 years of experience, and every project is backed in writing.
Written by the team at Groundwork Construction Co.












