







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in La Mirada, CA: What It Costs and How It’s Done
Metal roofing in La Mirada typically runs $15,000 – $40,000 for a full residential roof, depending on square footage, panel type, and how much prep the existing roof needs. Most jobs are completed in 3 – 7 days once materials land on site. If you’re deciding between a metal system and another material, call (888) 255-8179 for a free on-site estimate and a written, line-item quote before anyone touches your roof.
How We Handle the Job, Start to Finish

We don’t hand you a number and disappear. Here’s exactly what happens on a metal roofing project, step by step, so you know what you’re paying for at each stage.
Stage 1: On-Site Assessment and Written Estimate (Day 1)
We inspect the existing roof deck, measure every plane, check for soft spots in the sheathing, and look at flashings, valleys, and penetrations. If you have a tile or shingle roof now, we note what needs to come off and what underlayment or deck repair may be required. You’ll walk away with a written, itemized quote and a clear answer on what’s included and what isn’t. This visit usually takes 60 – 90 minutes.
Stage 2: Permits, HOA Check, and Material Order (Days 2 – 5)
We pull the roofing permit through the City of La Mirada and verify any HOA architectural restrictions on panel color, profile, and panel exposure. At the same time we order your panels cut to length and the underlayment, flashing, and fastener package. On material lead times: standing seam is often a two-to-three-week order if you’re picking from a limited color palette; pre-formed panel systems can move faster. We confirm the schedule with you before we order.
Stage 3: Tear-Off and Deck Prep (Day 1 of Construction)
Existing roofing is removed down to the deck. If the sheathing has water damage, we show you before we replace it – no surprise add-ons buried in a final invoice. New underlayment goes down over the deck, and any valleys or penetrations get flashed before a single panel goes up. This is typically one full day for an average single-story home.
Stage 4: Panel Installation (Days 2 – 3)
Panels are set in sequence, secured with the manufacturer-specified fasteners, and checked for panel alignment at the ridge and eaves. On standing seam, the seams are mechanically rolled closed. If you’ve chosen exposed-fastener panels, every screw gets driven to the correct depth and torque – it’s the one thing that determines whether the panels outlive their warranty. Two to three days for most La Mirada homes.
Stage 5: Final Inspection and Walkthrough (Days 4 – 7)
We coordinate the City of La Mirada building inspection, clean the site thoroughly, and do a final walkthrough with you – pointing out how the system works, what to check annually, and how to handle any future roof repair needs. You get warranty documentation in writing. The 730-Day Done Right Promise means if anything about the workmanship falls short within that window, we come back and make it right at no cost to you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Metal roofing isn’t one product. Here are the real choices most homeowners in La Mirada face, with the honest trade-off on each:
- Standing seam panels (majority of jobs): Concealed fasteners, raised seams, cleanest look, longest service life. Higher upfront cost, and you’re more limited on color options. Works well with the fire-resistance goals for this part of LA County.
- Exposed-fastener panels (corrugated or ribbed): Lower cost per square foot, faster install, more color and profile variety. The trade-off: exposed washers are the failure point years down the road if fasteners weren’t driven correctly. Worth it on outbuildings, porches, or budget-sensitive projects.
- Stone-coated steel (metal panels stamped and coated with stone granules): Mimics tile or shake, lighter than tile, still fire-resistant. Costs more than basic metal, less than tile. A common choice on 1960s La Mirada tract homes where the original profile was flat tile or shingle.
- Finish and color palette: Standard factory colors (typically 15 – 20 options) are budget-friendly. Custom-match colors and premium finishes push the price up but hold appearance longer.
- Panel gauge/thickness: Thicker panels handle wind-driven debris better. For Santa Ana wind events and brushfire pressure from the nearby hills, we typically recommend a heavier-gauge panel where budget allows.
Metal Roofing Costs in La Mirada, CA

Typical metal roof installation in La Mirada runs $15,000 – $40,000. The low end is a straightforward tear-off and replacement on a small single-story home with exposed-fastener panels. The high end is a larger footprint, standing seam, structural upgrades, or a steep roof with multiple valleys and penetrations.
What pushes you toward the high end:
- Roof size and complexity: Footprint square footage plus the number of valleys, hips, and penetrations. Cut-up roofs are slower and more material-hungry.
- Existing roof condition: Soft deck, rotted fascia, or a second layer to tear off adds labor and material.
- Panel type and gauge: Standing seam typically runs 20 – 30% more per square than exposed-fastener panels. Thicker gauge adds cost.
- Permit and code scope: La Mirada’s built-out character often triggers code review on older structures. Re-sheathing or structural repair found during tear-off affects the final number.
- Access and staging: Tight side-yard setbacks on 1960s tract lots mean limited staging room, which affects labor hours.
What’s typically included in a written estimate: tear-off of existing roofing, deck inspection and minor wood repair, new underlayment, flashing, panels, fasteners, ridge cap, permit, inspection coordination, and cleanup. What usually isn’t: major structural repair, skylight replacement, fascia and soffit if they need replacing, and gutter work. Those get priced separately and in writing before we start. No-hassle upfront pricing means the number on the estimate is the number you pay unless you approve a written change order.
See the difference
Before
After
Before
After
Before
AfterWhat La Mirada Homes Specifically Do to This Job
La Mirada is a mid-century master-planned community, developed largely in the 1950s and 1960s by the La Mirada Land Company as a planned suburb. That means most metal roofing work here involves re-roofing the same handful of original tract-home floor plans rather than new construction. The housing stock – 1950s – 60s single-story post-war tract houses with original slab foundations, small closets, and single-car garages – is what we most often see, along with infill and attached housing near Biola University. Because the city was largely built out by the 1960s, contractors here spend their time pulling permits on uniform old tract lots with tight side-yard setbacks, and neighbors know the original floor plan. That matters on a roof job: we’re working close to fence lines, with limited staging area, on structures that may have undocumented modifications from previous owners.
Climate adds a second layer. This is inland-coastal LA County with hot, dry Santa Ana wind events and seasonal brushfire pressure from the nearby hills. Metal roofing is a natural fit here – fire-resistant material and wind-rated fastening systems address exactly the risks this part of the county faces. We check hail and wind ratings, plan ember-resistant details at valleys and penetrations, and confirm fire classification with you before ordering panels. If your project grows into a full Roofing in La Mirada scope – gutters, fascia, or underlayment upgrades across the whole envelope – we’ll quote that in writing so nothing gets tacked on later. For the broader picture on how a roof fits your home’s exterior, our Roofing service page covers the full scope.
Serving La Mirada, CA – Our Local Coverage Area
We serve La Mirada and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in La Mirada

Most metal roofing projects in La Mirada are completed in 3 – 7 days of on-site work once materials arrive. Standing seam typically takes longer than exposed-fastener panels because of the seam-rolling step. Add 2 – 3 weeks before installation for material lead time. Call (888) 255-8179 for a project-specific timeline – estimates are free.
Yes, a roofing permit from the City of La Mirada is required for a full metal roofing replacement. We pull the permit and coordinate the inspection as part of the job. Homeowners sometimes assume re-roofing is exempt if they’re not changing the footprint – it isn’t. Call (888) 255-8179 and we’ll walk you through what the permit covers.
In most La Mirada re-roofs, no – the work stays on the roof surface and doesn’t touch interior plumbing or electrical. Older 1950s-60s tract homes occasionally show hidden deck rot or prior modifications that change the scope once tear-off begins. We document and show you before we do any structural repair. Call (888) 255-8179 for a free on-site assessment.
Metal roof installation in La Mirada runs $15,000 – $40,000 for a full residential replacement, with standard finishes and exposed-fastener panels at the low end and standing seam on a complex, larger roof at the high end. Call (888) 255-8179 for an exact quote – estimates are free and written line by line.
Every metal roofing project we install is backed by our 730-Day Done Right Promise, plus the panel manufacturer’s product warranty. The material warranty covers the panels; the 730-Day Promise covers workmanship for two full years. Call (888) 255-8179 for written warranty terms on your specific system.
Homeowners in La Mirada often pair a new metal roof with Window Replacement in La Mirada or Impact Windows & Doors in La Mirada while the scaffolding and crew are already on site – one disruption instead of two. We’re glad to cover all three in a single visit across La Mirada and the surrounding neighborhoods.
Get a Free Metal Roofing Estimate in La Mirada
Call (888) 255-8179 anytime – a live person answers 24/7. We’ll schedule a free on-site estimate, walk your roof, and give you a written, line-item quote for metal roofing in La Mirada. No pressure, no high-pressure close, no change orders unless you approve them in writing. Ask about our $1,000 off projects over $10,000 and 0% financing for 18 months on qualifying jobs.
Written by the team at Groundwork Construction Co.












