







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What does a chain link fence in La Mirada cost, and how long does it take?
Chain link fence in La Mirada runs roughly $3,500 to $9,000 for most residential jobs, and a typical fenced perimeter is finished in one to three days once an estimate is signed. A standard serviceable perimeter (usually 150 to 300 linear feet) sits near the middle of that range with galvanized posts, a tensioned top rail, and a walk gate or two. Call (888) 255-8179 to schedule a free estimate and we’ll measure the actual run.
How we build a chain link fence, stage by stage

A chain link job is a lot of small steps done in the right order, and the order is most of whether it lasts. Here’s how it actually plays out on a La Mirada lot.
1. Site walk and exact measurement (day 1, about an hour). We walk the property line and confirm the total footage, gate locations, and what’s buried along the path. Old footing stubs, irrigation lines, and tree roots all change the plan. You decide the fence line and where the gates land, including whether the main gate swings into the yard or out toward the driveway.
2. Utility locate and layout (day 1). Before anything gets dug, we call the locate service and mark the run. We set stakes and string line along the exact path. On older La Mirada lots this is the step that saves headaches later, because a post struck into the wrong place is expensive to undo. You confirm the stakes before we cut ground.
3. Demo and post setting (day 1 to day 2). We pull any old fence, dig the post holes, and set posts in concrete. Post spacing, hole depth, and concrete curing drive the schedule, and the concrete needs time before rails go up. This is the stage where you choose post material and terminal style.
4. Rails, mesh, and tensioning (day 2 to day 3). Top rail, then mesh, then the tension bar and turnbuckle tightening. A fence that’s been stretched tight is a fence that stays tight. We check every panel for sag and squareness as we go.
5. Gates and final walk (day 3). Gate frames hung, hinges checked, latch hardware adjusted, and a final walk with you before we leave. You sign off while we’re standing there, and anything that needs a tweak gets tweaked on the spot.
Most La Mirada jobs finish in single visits. Larger perimeters or jobs with heavy demo can split across two days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The chain link options you’ll actually choose between
Chain link isn’t one product. The choices below are the ones that move price and lifespan the most.
- Post and rail gauge. Thicker-walled posts and rails cost more up front but resist leaning and rust longer. The thin-wall economy version is fine for a temporary enclosure and a poor fit for a boundary line you want to keep for years.
- Galvanized vs. vinyl-coated. Bare galvanized is the classic silver finish and handles the local sun and salt air well. Vinyl-coated (black, green, or brown) costs more and blends into landscaping, and the coating protects the steel from corrosion. On the inland-coastal edge of the county, coating buys real years.
- Mesh height and gauge. Common residential heights run 4 to 6 feet. Taller runs and thicker wire cost more per foot and add a bit more structure to the fence.
- Terminal and tension hardware. Compression rings, tension bars, turnbuckles, and brace bands are where cheap fences fail. We spec the hardware to match the mesh weight.
- Gate style. A single walk gate, a wider driveway gate, or a double gate for equipment access. Gate width and hardware are the single biggest line-item swing in the estimate.
- Finish hardware. Stainless or coated hinge and latch components cost a little more and hold up far better against the salt-laden air coming off the coast. It’s a small line item that prevents a stubborn gate a few years out.
What chain link fence costs in La Mirada, CA

Expect $3,500 to $9,000 for a residential chain link perimeter in La Mirada. That’s the lead range for this job, and the line items below show how it breaks down.
| Line item | Typical range |
|---|---|
| Galvanized chain link, standard residential perimeter | $3,500 – $6,500 |
| Vinyl-coated chain link (color match to landscape) | $4,800 – $9,000 |
| Old fence demolition and haul-off | $300 – $900 |
| Extra walk gate or driveway gate | $350 – $1,200 each |
| Tension and terminal hardware upgrade | $150 – $500 |
| Concrete footing repair on existing posts | $250 – $800 |
What pushes the number to the high end: total footage beyond about 300 linear feet; vinyl-coated mesh instead of bare galvanized; a driveway-width gate or double gate; heavy old-fence demolition; and a run that crosses a buried obstruction requiring re-routing. A short, straight backyard run with one gate is the low-end scenario.
What’s in a written line-item estimate: exact footage, post and rail gauge, mesh finish, gate count and width, hardware spec, demo and haul-off, and the concrete work. What typically isn’t: unexpected obstruction removal or ground repair outside the fence line. We flag anything that could push the number before we start, so the quote you sign is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat La Mirada homes do to a chain link job
La Mirada is a mid-century master-planned community, mostly 1950s-60s single-story post-war tract houses with original slab foundations and single-car garages, built out by the 1960s with almost no vacant infill left. That matters here: the original side-yard set-backs are tight, and existing fence lines often sit right on a property line that hasn’t moved in decades. When we run a new chain link fence, we’re usually replacing or extending a run set decades ago, and the old footings, irrigation, and stumps in that path are the real cost variable, not the mesh.
The inland-coastal climate adds its own pressure. Hot, dry Santa Ana wind events and seasonal brushfire pressure from the nearby hills push toward steel that won’t fail in a wind event. Dry summer heat also stresses the concrete footings as they cure, so we plan post-setting around the weather rather than against it.
We work runs throughout the 90638, 90639, and 90637 ZIPs, including the older tract blocks off La Mirada Boulevard and near Biola University’s attached housing, and we treat every one of those jobs as a site-specific measurement, not a stock layout.
If your project also involves regrading the driveway approach or a hardscape edge along the fence line, homeowners often pair this with our Concrete Driveways & Concrete Work in La Mirada or Asphalt Driveways & Resurfacing in La Mirada to line everything up in one bid. For the wider project, this is often part of a full Fence Installation in La Mirada, and you can see all of our Fence Installation work. We cover La Mirada and the surrounding neighborhoods.
Serving La Mirada, CA – Our Local Coverage Area
We serve La Mirada and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about chain link fence in La Mirada

Most residential chain link fences in La Mirada finish in one to three days, with a single-day perimeter common when the ground is clear. The main delay is concrete curing between post setting and rail installation. Call (888) 255-8179 to get a firm timeline for your lot.
Permit requirements for a chain link fence vary by height and location, and the city’s built-out mid-century lots have stricter rules than neighboring sprawl towns. We check the requirement for your specific height and setback before we start. Call (888) 255-8179 and we’ll confirm what your run needs.
Yes, in most cases we set posts and run mesh without touching the existing slab, driveway, or landscaping any more than the line requires. Anything buried along the fence path is identified during the utility locate. Call (888) 255-8179 to schedule a site walk.
Most residential jobs run $3,500 to $9,000 depending on footage, mesh finish, and gate count. Vinyl-coated mesh and a driveway gate push toward the top of that range. Call (888) 255-8179 for an exact quote, and estimates are free.
Every chain link fence we install is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If it’s not done right, we make it right. Call (888) 255-8179 with any warranty question.
Get a free chain link fence estimate in La Mirada
We’ll walk the line with you, measure the run, and hand you a written line-item estimate that covers every part: footage, gauge, finish, gates, hardware, and demolition. Upfront pricing, no surprises, and a live person answers your call around the clock. Call (888) 255-8179 to schedule your free on-site estimate for chain link fence in La Mirada.
Written by the team at Groundwork Construction Co.












