







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Hawaiian Gardens, CA: What It Involves and What It Costs
A chain link fence in Hawaiian Gardens typically runs $3,500 to $9,000, installed, and most residential jobs wrap up in one to three days once permits and materials are set. The lower end covers a standard 4-foot galvanized run along a small tract lot; the upper end is taller fencing, privacy slats, rolling gates and tight-alley access that slows the crew down. Call (888) 255-8179 and we’ll get an exact number for your property.
How Our Hawaiian Gardens Chain Link Fence Work Moves, Start to Finish

Chain link looks simple, and on a wide-open suburban lot it mostly is. Here, on lots boxed in by alleys and side yards under 4 feet, the sequence matters more than the material. Here’s what actually happens.
Step 1: Site walk and layout (day 1, roughly 1 to 2 hours). We walk the property line with you, confirm where the fence runs, and mark the corners. This is when you decide fence height, gate placement and whether you’re tying into an existing fence or starting clean. On Hawaiian Gardens lots, the property line is often a few inches off from where the homeowner assumed, and alley-facing rear lines are the usual surprise. We flag that before anything gets dug.
Step 2: Utility locate and demo (day 1, half a day). We call for utility marking and remove the old fence, footings and all. This is the stage that gets complicated in Hawaiian Gardens: irrigation lines, old concrete mow strips and, on alley-facing fences, asphalt or concrete that has to be cut to get terminal posts set below grade. If a previous fence was set in concrete, that concrete comes out and goes to the dumpster, which is part of why clearance and access drives the schedule here.
Step 3: Post setting (day 1 to 2). Terminal posts and line posts get set in concrete footings and left to cure. Heights, spacing and gauge are the decisions you’ve already made; the curing time is the one thing nobody can rush. Posts set on a Friday are typically ready to hang on Monday, and we tell you that up front rather than promising a one-day turnaround the material won’t allow.
Step 4: Framework, mesh and gates (day 2 to 3, roughly 4 to 6 hours). Top rail, tension bands, mesh, and the gate hardware go on. If you’re adding a rolling gate for alley access or a pedestrian gate for security, this is the day it hangs and gets adjusted. Gate hardware is where the quality of the install shows up: a gate that swings true on day one and still does two summers later is the difference between a good set and a bad one.
Step 5: Walkthrough and cleanup (same day, about 30 minutes). We haul off the old fencing and debris, walk the line with you, and make sure the gate latches the way you want it to. Anything that needs a tweak gets noted and handled before we call it done.
If you’re also reworking the ground the fence meets, homeowners often pair this with Concrete Driveways & Concrete Work in Hawaiian Gardens so the apron and the fence line get done in one pass, or with Asphalt Driveways & Resurfacing in Hawaiian Gardens when an alley-facing gate needs a fresh approach.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Chain Link Fence
Chain link isn’t one product. What you pick shifts both the price and how the fence holds up against the wind and the daily wear of a dense neighborhood.
- Gauge and coating. Standard residential mesh is typically 11.5-gauge; heavier 9-gauge costs more per foot but resists bending and sagging, which matters on a fence line where kids and bikes are involved. Galvanized mesh is the budget choice; vinyl-coated mesh costs more and holds up better against the sun and salt-heavy air that drifts inland from the coast.
- Height. 4-foot is the common backyard height and the cheapest per linear foot. 5 and 6-foot runs cost more in material and add privacy, and 6-foot is the usual choice when security is the point.
- Privacy slats. Inserted slats turn an open chain link into a solid screen, cut visibility and cut wind load on the fence itself. They add a meaningful percentage to the job and are the biggest single upgrade in the estimate.
- Gate type. A standard walk gate is modest; a rolling gate or double-drive gate for alley or driveway access is a much larger line item because of the framing and hardware it requires. Rolling-code openers and self-closing hardware are common asks on security-focused installs.
- Posts and footings. Terminal posts set in concrete to the right depth are what keep a fence straight. On old tract lots with shallow or disturbed soil, deeper footings cost more and are worth it.
Coastal Southern California’s mild, dry climate helps here: no freeze-thaw load and no snow, so a well-set chain link line typically holds for decades. The real enemy is wind and sun, which is why coating, footing depth and hardware quality are the decisions worth slowing down on.
What a Chain Link Fence Costs in Hawaiian Gardens, CA

Most residential chain link fence projects in Hawaiian Gardens land between $3,500 and $9,000 installed. A tight-height, straightforward backyard run on a small tract lot sits at the low end. Taller fencing, privacy slats, alley-facing gates and difficult access push toward the top.
| Line item | Typical range |
|---|---|
| Standard 4-foot galvanized chain link, per residential run | $3,500 – $5,500 |
| 6-foot security-height chain link with gates | $5,000 – $7,500 |
| Privacy slats added to an existing run | $1,000 – $2,500 |
| Rolling or double-drive alley gate | $1,200 – $3,000 |
| Old fence demo and haul-off | $300 – $900 |
What moves the number: total linear feet and height, whether the old fence and its concrete footings have to come out, gate count and gate type, privacy slats and mesh grade, and access. Access is the Hawaiian Gardens variable that surprises people. When a rear line runs along an alley and the crew has to stage out of a narrow driveway or carry materials the length of a lot, labor goes up.
A written estimate from us covers materials, footings, posts, mesh, gate hardware, demo, haul-off and cleanup, line item by line item, at an upfront price. What it typically doesn’t cover: utility relocation if a line is in the way, concrete or asphalt cutting beyond the fence line, and any grading or drainage work on the property, which we’ll scope separately if you need it.
See the difference
Before
After
Before
After
Before
AfterWhat Hawaiian Gardens Homes Specifically Do to This Job
Hawaiian Gardens is a small, fully built-out city of about 2.1 square miles with essentially no vacant land. Nearly every job here is on a 1950s – 60s tract lot of 5,000 square feet or less, and rear alleys are common. That geometry is the whole story of a chain link fence here: side yards often run 4 feet wide or narrower, driveways are tight, and a rear fence frequently sits against an alley that’s the only practical access. On the 90716 side of the city, we regularly see old fences leaning because the original posts were set shallow for a lighter fence decades ago. Neighbors watch every build in a close-knit city this size, and city permitting for fencing and gates runs through the same channels as the additions, ADU conversions and garage conversions that dominate construction here.
If the fence is part of a larger project, it usually works in the same pass as Fence Installation in Hawaiian Gardens, and our broader Fence Installation service covers the other fence types when a chain link line is only part of the plan. We work throughout Hawaiian Gardens and the surrounding communities.
Serving Hawaiian Gardens, CA – Our Local Coverage Area
We serve Hawaiian Gardens and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Hawaiian Gardens

Most residential chain link fences here finish in one to three working days, with post curing adding a day or so between set and hang. Small-lot geometry and alley access can push a job to three days. Call (888) 255-8179 for a schedule after a site walk.
Fence and gate work in this city typically requires a permit, and the requirements vary with height and location. We handle the permit pull and the inspection as part of the job. Call (888) 255-8179 and we’ll confirm what your property needs.
Yes, with care around existing concrete, irrigation and landscaping. On tight lots we stage materials off the alley or driveway and work the line in sections. Call (888) 255-8179 to talk through access at your property.
Most jobs run $3,500 to $9,000 installed, depending on linear footage, height, gates and access. Privacy slats and rolling gates add to the high end. Call (888) 255-8179 for an exact written quote, estimates are free.
Every chain link fence we install carries our 730-Day Done Right Promise, and if something isn’t right we come back and make it right. That’s the guarantee in writing. Call (888) 255-8179 to schedule your free on-site estimate.
Get a Free Chain Link Fence Estimate in Hawaiian Gardens
Call (888) 255-8179 and a live person answers, any hour, any day. Tell us the address, the rough footage and whether you’re fencing the rear line, an alley gate or the whole property. We’ll set a time to walk the property, measure the line and hand you a line-item written estimate at an upfront price. Free, no pressure, no surprise change orders later.
Written by the team at Groundwork Construction Co.












