







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence Installation in Lakewood, CA: What It Costs and How Long It Takes
An aluminum fence in Lakewood runs $4,000 – $10,000 for a typical front or side-yard run, and most jobs are measured, permitted, and set in about a week of actual work once materials land. The fence itself goes up fast; the post footings and the inspection are what set the pace. Call (888) 255-8179 for a free on-site estimate and we’ll walk the property line with you before you commit to anything.
How we build an aluminum fence in Lakewood, stage by stage

Aluminum is a different animal from wood or vinyl, and the sequence matters more than people expect. Here’s what actually happens.
Stage 1: Site walk and layout (day 1, 1 – 2 hours). We walk the property line with you, confirm where the fence runs relative to the setback, and locate the utility markings before anyone digs. This is where you decide gate placement and swing direction. On a typical Lakewood lot the side yards are narrow, so gate width and hinge side get settled now, not later.
Stage 2: Permit submission and HOA check (days 1 – 10, depending on the city). Aluminum fence over the height threshold usually needs a permit in this market, and we pull it. If you’re in an HOA tract, you’ll also need written approval on style and color before we order. We tell you what the submittal needs so you’re not chasing it alone.
Stage 3: Demolition and post layout (day 1 of install). Old fencing comes out and gets hauled. We then string the line and mark every post location, checking spacing against panel widths so you don’t end up with a cut-down panel at an ugly spot. Posts get set in concrete footings and cure before anything hangs on them.
Stage 4: Panel and gate hang (days 2 – 3). Rails, pickets, and gates go up, hinges and latches get adjusted, and we check every gate for swing and self-close. This is the part that goes quickly once the footings are cured.
Stage 5: Final walkthrough and inspection (same week). We walk the run with you, confirm the gate hardware, and coordinate the inspection if the permit requires one. You sign off on the finished line, and the workmanship sits under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The aluminum fence options you’ll choose between
- Picket spacing and style. Standard 4-inch spacing reads open and airy; a tighter 3-inch or a “pool code” layout is required if the fence surrounds a pool. Decide based on whether this is a boundary fence or a pool barrier.
- Height. 4-foot is common for a front-yard decorative run; 5- to 6-foot gives more privacy and screening. Taller costs more per panel and may change the permit.
- Finish. Powder-coated black or bronze is the standard and holds up well. A textured or matte finish hides scuffs better than gloss and reads more like wrought iron from the street.
- Rackable vs. level panels. If your grade slopes, rackable panels follow the hill without stair-stepping; level panels are cheaper but step down in blocks. Sloped Lakewood yards usually want rackable.
- Gate hardware and posts. Self-closing hinges, a quality latch, and heavier posts at gate openings. This is where cheap fence systems fail first, so we spec it up.
What an aluminum fence costs in Lakewood, CA

Most Lakewood aluminum fence jobs land between $4,000 and $10,000, with the exact number driven by run length, height, gate count, and site conditions. A short 4-foot front-yard run sits near the bottom; a full perimeter with two gates and pool-code spacing pushes toward the top.
| Line item | Typical range |
|---|---|
| Aluminum fence (standard run, 4-ft) | $4,000 – $10,000 |
| Permit and inspection fees | Varies by scope |
| Gate (each, installed) | Quoted per gate |
| Old fence removal and haul-away | Included in written quote |
The variables that move you to the low or high end: total linear feet, fence height, how many gates, whether the ground is level or sloped, and whether existing fencing needs demolition. A written estimate from us itemizes panels, posts, footings, gates, removal, and permit. What it won’t include unless it’s spelled out: utility relocation if a line runs through the fence line, unexpected concrete or root removal, and HOA submittal fees.
See the difference
Before
After
Before
After
Before
AfterWhat Lakewood homes specifically do to this job
Lakewood is one of America’s first planned suburbs, and nearly every home was built between 1950 and 1955 as a wood-frame stucco tract house on a concrete slab. That matters for fencing: the side-yard boundaries on these lots are tight, the soil under the slab is settled and dry, and the original property-line markers can be buried or missing. Because every house on the block shares the same slab and framing plan, the setbacks are uniform, which actually makes layout predictable once we’ve confirmed the line. The marine layer and dry Santa Ana wind cycles also take a toll – powder-coated aluminum holds up far better here than wood, which is one reason aluminum is so common in the 90712 and 90715 tracts. We work all four ZIP codes: 90711, 90712, 90714, and 90715. If your project grows into a full boundary redesign, that scope lives on our Fence Installation in Lakewood page, and we cover the surrounding area on our Lakewood service-area page.
Serving Lakewood, CA – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Aluminum Fence in Lakewood

Most aluminum fence jobs take about a week of active work once materials arrive, with the permit approval adding 1 – 2 weeks before that. Footings need to cure before panels hang, which is the single biggest schedule variable. Call (888) 255-8179 for a timeline specific to your property.
Usually yes if the fence exceeds the height threshold, and we pull it for you. We confirm the requirement during the site walk so there are no surprises at inspection. Call (888) 255-8179 for a free estimate and a permit walkthrough.
No. Aluminum fence posts set in isolated concrete footings along the line, not tied into your slab, so the home’s foundation and plumbing stay untouched. We locate utilities before digging to avoid any conflict. Call (888) 255-8179 to schedule a free estimate.
Most jobs land between $4,000 and $10,000 depending on run length, height, and gate count. A simple front run sits near the low end; a full perimeter with multiple gates sits near the high end. Call (888) 255-8179 for an exact quote – estimates are free.
Every aluminum fence we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. The manufacturer’s finish warranty on the panels applies alongside it. Call (888) 255-8179 to talk through coverage on your specific system.
Get a free aluminum fence estimate in Lakewood
If you’re ready to price an aluminum fence in Lakewood, call (888) 255-8179. A live person answers around the clock, and we’ll set a free on-site estimate where we walk your property line, confirm setback and permit needs, and hand you a written line-item quote. The number you see is the number you pay – no surprises. If your project also touches the driveway or a patio, homeowners often pair this with Driveway Repair & Replacement in Lakewood or Patios, Walkways & Pool Decks in Lakewood, and our Fence Installation service handles the wider scope. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.












