







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Cerritos, CA: What It Takes and What It Costs
Backsplash, tile & flooring work in Cerritos usually runs $14,000 – $45,000 for a full kitchen floor and wall package, though a backsplash-only job lands at $800 – $2,500 and tile flooring alone sits lower in that range. A straight backsplash takes 1 – 2 days; floor tile plus backsplash usually runs 4 – 7 working days once material is on site. Call (888) 255-8179 for a free on-site estimate with a written, line-item price before anything gets ordered.
The Problem Most Cerritos Homeowners Hit Before Tile Ever Goes Down

In Cerritos, the tile decision rarely fails on taste. It fails on approval. This is a master-planned, fully built-out city, and essentially every lot was developed between the late 1960s and 1990s under strict planned-unit-development standards. That means the property you’re tiling was reviewed by an architectural committee once already, and changes that touch visible surfaces or alter the envelope can require design review to match the original tract palette. Contractors from Norwalk or Bellflower who don’t work here regularly get burned by it.
Our approach is to check the architectural rules before the tile is ordered, not after the adhesive sets. Where a community has an architectural review board (ARB) or CC&R design standards, we help you assemble the submittal: tile samples, a simple plan sketch, and a finish schedule showing color and grout. We schedule work so the approved scope and the installed scope match. No surprises at the walkthrough, no re-do at your expense.
Some of what we watch for on Cerritos jobs:
- Exterior-facing transitions. Tile that meets a patio door or slider can read as an exterior change. We keep thresholds and door styles within community standards.
- Flooring sound and feel. Second-floor tile in the condo and townhome clusters near the Town Center needs an underlayment that keeps noise down. Quiet operation matters to neighbors and to the board.
- Matching and continuity. If only part of a floor is being replaced, we work to match the existing field tile and grout so the patch doesn’t announce itself.
- Panel and finish continuity. Where a backsplash meets cabinetry, we keep the tile line consistent with the kitchen’s original palette so the room still reads as one design.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How We Run a Tile Job, Day by Day
Here’s the actual sequence, not a promise to “handle everything.”
Stage 1 – Walkthrough and scope lock (day 1, about 60 – 90 minutes)
We measure the floor and wall areas, check substrate condition, and confirm where tile starts and stops. You decide the tile, grout color, and layout pattern here. If the job is part of a larger Kitchen Remodeling in Cerritos project, we sequence tile against cabinet and countertop dates so nothing gets torn out twice.
Stage 2 – Protection and demolition (day 1 – 2)
Floors get covered, appliances get moved and protected, and existing tile, vinyl, or laminate comes up. On older Cerritos homes we sometimes find a second layer of flooring or a plywood substrate that’s delaminated. We stop, show you, and price the fix in writing before continuing.
Stage 3 – Substrate prep and layout (day 2 – 3)
This is the stage that decides whether the tile lasts. We level the substrate, install backer board where needed, and lay out the pattern from a center line so cuts land at the walls, not down the middle of the room. You approve the dry layout before a single tile is set.
Stage 4 – Setting tile and grouting (day 3 – 5)
Floor tile goes down first, then the backsplash once counters are in. Grout goes in a full 24 hours after setting so it cures correctly. We use a grout and sealant that stand up to kitchen moisture and daily wiping.
Stage 5 – Sealing, caulk, and final walkthrough (day 5 – 7)
We seal natural stone, caulk the wet joints, clean up, and walk the job with you. Every tile job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
The Options You’ll Actually Choose Between
- Porcelain vs. ceramic. Porcelain is denser, handles moisture better, and costs a bit more per square foot. Ceramic is easier on the budget and fine for a backsplash. For a kitchen floor in a busy Cerritos household, porcelain is usually the better call.
- Natural stone (travertine, marble, slate). Beautiful and unique, but it needs sealing every year or two and it’s softer underfoot. Suits a homeowner who wants character and doesn’t mind the upkeep.
- Large-format tile (12×24 and up). Fewer grout lines, a cleaner look, and faster to clean. It demands a flatter substrate, so prep costs more. Worth it on open floor plans.
- Mosaic and subway backsplash. Subway tile is the reliable, affordable choice at the low end of the backsplash range. Mosaic sheets add texture and cost more in labor because of the detail work.
- Grout and sealant choices. Epoxy grout resists staining and doesn’t need sealing; cement grout costs less and needs periodic resealing. We’ll tell you which fits your traffic and cleaning habits.
See the difference
Before
After
Before
After
Before
AfterWhat Backsplash, Tile & Flooring Costs in Cerritos, CA
Typical Cerritos numbers, installed:
- Backsplash installation: $800 – $2,500
- Tile flooring (kitchen): priced within the lead range, driven by square footage and tile grade
- Full backsplash + floor tile package: $14,000 – $45,000 when it’s part of a larger kitchen scope
Four things move the number:
- Square footage and layout complexity. A galley kitchen with simple runs costs less than an L-shape with an island, angles, and lots of cuts.
- Existing condition. Cracked slab, delaminated plywood, or a hidden second layer adds prep and disposal.
- Material grade. Entry-level porcelain to premium stone can swing the tile line by thousands.
- Scope creep. Moving an outlet, adding a pot filler, or relocating a gas line for a new range is a separate line item and, in some cases, a separate permit.
Your written estimate shows material, labor, prep, and disposal as separate lines. Upfront pricing, no surprises – the number you see is the number you pay. Call (888) 255-8179 for an exact quote; estimates are free.
What Cerritos Homes Specifically Do to This Job

Most of the homes we tile in Cerritos are 1960s – 1980s single-family tract homes and planned developments, plus the condo and townhome clusters near the Town Center. That build era matters. Original flooring is often vinyl over plywood, and original countertops are tile-set, which means the backsplash tear-out can expose old mastic and a wall that needs patching before new tile goes on. We plan for that.
The 605/91 interchange bisects the city, and the strict PUD architectural review here means even interior finishes that touch a visible surface may need a design submittal. We pull the right permit for structural or plumbing changes and make sure the inspection passes before we close the wall. If you’re pairing this with other work, homeowners often pair it with Vanities, Tile & Fixtures in Cerritos in the bathrooms, or a Tub-to-Shower Conversion in Cerritos when the tile project spreads to the bath. We cover the whole of Cerritos, and this work fits under our broader Kitchen Remodeling service. Our technicians have up to 12 years of experience.
Serving Cerritos, CA – Our Local Coverage Area
We serve Cerritos and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Cerritos
A backsplash alone takes 1 – 2 days. A floor tile plus backsplash package usually runs 4 – 7 working days, with grout curing a day after setting. Add time if we find substrate damage or if the job needs a permit. Call (888) 255-8179 and we’ll give you a start and finish date with your estimate.
Cosmetic tile replacement usually doesn’t need a permit. Structural changes, plumbing relocation, or electrical work do – and the city’s review process is exacting. We pull the permits and make sure the inspections pass. Ask us at the estimate and we’ll tell you exactly what your job needs.
Yes. Most backsplash and floor tile jobs don’t touch plumbing or framing. If you want to add an outlet, a pot filler, or relocate a fixture, that’s a separate scope – and we’ll price it as such so you can decide. Call (888) 255-8179 to talk through your layout.
A backsplash runs $800 – $2,500. A full floor plus backsplash package lands in the $14,000 – $45,000 range when it’s part of a larger kitchen scope. Material grade and existing condition are the two biggest swing factors. Call (888) 255-8179 for an exact written quote – estimates are free.
Every tile job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. If a tile lifts, a grout line cracks, or a seal fails, we come back and fix it. Ask us to put the warranty in writing with your estimate.
Get a Free Estimate for Backsplash, Tile & Flooring in Cerritos

Call (888) 255-8179 to schedule a free on-site estimate for backsplash, tile & flooring in Cerritos. On the call we’ll ask about your rooms and your timeline, then set a visit where we measure, check the substrate, and hand you a written line-item price. No-hassle upfront pricing, background-checked uniformed technicians, and 0% financing for 18 months on qualifying projects. Live person answers, 24/7.
Written by the team at Groundwork Construction Co.












