







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Cerritos, CA: Timeline, Permit, and Cost
A tub-to-shower conversion in Cerritos typically runs $3,500 – $10,000 and takes three to five working days once materials are on site. The job means pulling the tub and its surrounding wall tile, reworking the drain and valve to shower height, waterproofing the wet zone, then setting a shower pan and new wall finish. Because the city reviews alterations closely and most homes here sit inside planned developments, the paperwork matters as much as the tile. Call (888) 255-8179 to schedule a free on-site estimate.
How our crew takes a tub out and puts a shower in

Every conversion follows the same five stages. We walk you through what gets decided at each one so nothing is left hanging mid-job.
Stage 1: Measure and demolition (day 1)
We shut the water, protect the floor and hallway, then cut out the tub, the surround, and the drywall back to studs. This takes most of a morning. You decide at this point whether the existing valve stays or gets replaced, which is easier to answer once we see the wall cavity.
Stage 2: Rough plumbing and framing (day 1 into day 2)
The tub drain sits lower than a shower drain, so the drain assembly gets rebuilt and the valve raised to a comfortable height, usually around 42 to 48 inches. Any rotted studs or soft subfloor get replaced here. This is where older Cerritos homes surprise us, and we flag it before we build over it.
Stage 3: Rough inspection (day 2)
Because the plumbing changes, the work gets inspected before it’s closed up. We schedule the inspection and meet the inspector on site. You don’t have to be home for this, though some homeowners like to be.
Stage 4: Waterproofing and pan build (day 2 into day 3)
A sloped mortar bed or a manufactured pan goes in, then a bonded waterproof membrane, then a flood test where required. This stage can’t be rushed. Skipping it is the number-one cause of shower leaks we get called back to fix on other people’s work.
Stage 5: Tile, glass, and trim (days 3 to 5)
Wall tile, grout, fixtures, and the glass door go in last. You choose the tile layout and grout color before we start setting. Final walkthrough happens once the grout cures and the door swings clean.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that shape your new shower
Most of the decisions here are about how the walls get finished and how much of the existing plumbing you keep. Here’s what actually gets weighed.
- Acrylic or fiberglass surround: The lowest cost finish and usually the fastest install. Holds up well, wipes clean easily, but you’re limited to factory sizes and colors.
- Porcelain or ceramic tile: The most common upgrade. Wide range of looks and it lasts decades. Costs more in labor and needs proper waterproofing behind it.
- Natural stone tile: Marble and travertine look great but need sealing every year or two and cost noticeably more. Suits homeowners who want the premium finish and will maintain it.
- Prefab shower pan vs. tiled pan: A prefab pan is quicker and reliable. A tiled pan gives a custom size and a seamless look but adds labor and curing time.
- Valve and fixture brand: Keeping the existing valve saves money. Upgrading to a name like Kohler gets you better temperature control and a longer service life.
- Glass and door style: Framed doors cost less; frameless glass costs more but opens up the space visually.
We bring samples so you’re comparing real materials, not a catalog photo. Pipe and tile lines like Quikrete setting materials are standard on our jobs because they hold where cheaper products fail.
What Tub-to-Shower Conversion costs in Cerritos, CA

Plan on $3,500 to $10,000 for a tub-to-shower conversion in Cerritos. Most of our jobs land in the $5,000 to $8,000 range. The number moves based on five things:
- Shower size and shape: A standard 30 by 60 alcove is the low end. A larger or custom-sized shower pushes cost up.
- Existing condition: Rotted framing, failed subfloor, or old galvanized drain lines add labor and materials.
- Plumbing and electrical relocation: Moving the drain or adding a niche light is extra. Keeping the valve in place saves money.
- Material grade: Acrylic surrounds sit at the bottom. Tile is mid. Natural stone is the top.
- Permit scope: A plumbing change means a permit and inspection. A cosmetic swap of the surround may not need one.
Our written estimate lists each line: demo, plumbing, waterproofing, tile, glass, permit, and disposal. Upfront pricing, no surprises. What typically isn’t included: hidden rot we can’t see until walls open, and structural changes, which we price separately once discovered. That work is part of a larger scope that can connect to our bathroom remodeling service if you decide to go further.
See the difference
Before
After
Before
After
Before
AfterWhy Cerritos homes make this job different
Cerritos was built out between the late 1960s and the 1990s under strict planned-unit-development standards. Almost every lot is already developed, so nearly all our work is remodel on aging tract homes rather than new construction. Many of these homes still carry original galvanized or early copper plumbing, which matters directly here: a tub-to-shower conversion is the moment those old lines show their age, and we plan for it. The 605/91 interchange bisects the city, and the design review that governs exterior work applies to interior plumbing permits too, so the paperwork is real.
Rooms are typically small, so a walk-in alcove reads as a real gain in usable space. And because the region’s seismic exposure and long dry summers stress the building envelope, we check the subfloor and framing while the tub is out, since it’s the cheapest time to fix them. If you’re also refreshing the outside, homeowners often pair this with Metal Roofing in Cerritos or Tile Roofing in Cerritos while the crew is already scheduled.
Serving Cerritos, CA – Our Local Coverage Area
We serve Cerritos and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Tub-to-Shower Conversion in Cerritos

Three to five working days on site for most Cerritos jobs, counted from demo to final glass. Tile with a mortar pan and a flood test can push toward five days. Custom stone or a plumbing relocation can add a day or two. Call (888) 255-8179 for a timeline tied to your exact bathroom.
Yes, if the plumbing changes, which it almost always does. Moving the drain and raising the valve triggers a plumbing permit and inspection. A pure cosmetic surround swap may not. We pull the permits and meet the inspector so you don’t chase paperwork. Call (888) 255-8179 and we’ll confirm what your job needs.
Often, yes. If the drain and valve stay where they are and you keep the same footprint, the job stays simpler and cheaper. We confirm that on site before quoting, because a same-spot conversion can land near the bottom of the $3,500 – $10,000 range.
Between $3,500 and $10,000, with most jobs around $5,000 to $8,000. Material grade, shower size, and hidden plumbing condition drive the difference. Call (888) 255-8179 for an exact written quote; estimates are free.
Every conversion is covered by our 730-Day Done Right Promise: if it isn’t right, we make it right. The waterproofing and pan carry that same backing. You’ll see the terms in writing before work starts.
Get a free estimate on your Cerritos shower conversion
Call (888) 255-8179 and we’ll set a free on-site estimate at your Cerritos home. We’ll measure the bathroom, check the drain and valve, confirm whether a permit is needed, and leave you with a written line-item quote covering the Bathroom Remodeling in Cerritos scope. We cover all of Cerritos and nearby Artesia, Norwalk, Hawaiian Gardens, and Bellflower. A live person answers, day or night.
Written by the team at Groundwork Construction Co.












