







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in West Whittier-Los Nietos: What the Job Actually Involves
Custom and geometric windows in West Whittier-Los Nietos usually run $4,500 to $15,000 for a whole-home changeout, and a single feature window (a round, arch, trapezoid, or angled unit) typically lands in the $1,800 to $6,500 range depending on size and glazing. Plan on three to six weeks from signed contract to final inspection: two to three weeks for fabrication once the order is placed, and a two-to-four-day install for most homes. Call (888) 255-8179 for a free on-site estimate before you commit to a shape.
How We Build a Geometric Window Order, Stage by Stage

Custom and geometric windows aren’t a stock swap. Each opening has to be templated, the shape has to be reconciled with whatever the wall is actually doing, and the fabrication clock doesn’t start until the measurements are locked. Here’s the order we run it in.
Stage 1: Field measurement and template (day 1, about 2 hours)
We measure every rough opening and, for arched or angled units, take a physical template of the opening itself. This is where we find out whether the header is straight, whether an old addition shifted the frame, and whether the wall around the window is plumb. You decide at this stage whether you’re replacing the frame or keeping it and dropping in a pocket unit, which changes the price and the install schedule.
Stage 2: Finish and glazing selections (day 3 to day 7)
You pick the frame material, the interior and exterior finish, the glass package, and the grille pattern. Each of those is a real lead-time item on a geometric window – a half-round with a custom radius grille takes longer to fabricate than a plain arch. We put all of it in a written line-item quote so nothing shifts once the order goes in.
Stage 3: Order and fabrication (2 to 3 weeks)
Once the order is placed, the units are built to your template. Nothing happens on your house during this stretch except permit filing if the scope needs one. We use this window to confirm the installation sequence, because a round unit on a second story has to be staged into position before the scaffolding comes down.
Stage 4: Demo, prep, and install (2 to 4 days)
We pull the old units, check the framing and flashing, and address any rot we find before the new window goes in. Geometric windows take longer to set than rectangles because the flashing has to follow the curve or the angle, and a poorly flashed arch is a leak waiting for the first winter rain. New construction windows get nailed to the frame and fully flashed; pocket replacements go into a prepared opening.
Stage 5: Trim, seal, and inspection (1 to 2 days)
Interior trim goes back, exterior caulk and sealant go on, and we walk the job with you. If the work was permitted, the inspection happens here. You sign off only when the units open, close, and latch the way they should.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions on a geometric window come down to four things: the frame material, the glass, the shape tolerance, and how the unit fits the existing wall. Here’s the honest trade-off on each.
- Vinyl frames: The value pick. Good thermal performance, low maintenance, and the lowest cost per unit. The catch is that vinyl can’t be bent into tight radiuses without losing structural strength, so the sharper geometric shapes often aren’t available in vinyl.
- Wood-clad (aluminum or vinyl exterior over a wood interior): This is what most homeowners pick for a feature arch or a round picture window, because you get a real wood interior and a weather-tough exterior. Andersen and Marvin both build to custom templates. Costs more than vinyl, and the interior does need periodic care on some finishes.
- Fiberglass: Dimensionally stable and holds up well under heat cycling, which matters in the Whittier area’s hot, dry summers. Fewer radius options than wood-clad, and the price sits between vinyl and wood.
- Glass package: Low-E, argon fill, and tempered where code requires it (a unit close to a floor or a door). A feature window facing the afternoon sun here will benefit from low-E more than a shaded window will.
- Grille pattern: The interior grille is where a geometric window either reads custom or reads cheap. A radial grille on an arch costs more than a plain single pane, and it’s worth it if the window is the focal point of the room.
We also handle the full opening assembly when a window job grows into a wall project – if you’re widening an opening or cutting a new one, that’s part of a full Windows & Doors in West Whittier-Los Nietos scope, and we’ll quote it as one job rather than two.
What Custom & Geometric Windows Costs in West Whittier-Los Nietos, CA

Whole-home custom window packages here run $8,000 to $25,000 depending on how many openings get a shape and what material you pick. A single architectural feature window is usually $1,800 to $6,500. Window replacement of standard units in the same visit sits at $4,500 to $15,000, so if you’re mixing stock and custom, that’s the ballpark your total lands in.
Five things push the number from the low end to the high end:
- How many openings are actually non-rectangular. One arch is a feature; six of them is a fabrication project. Each templated shape adds cost.
- Material grade. Vinyl to wood-clad can double the per-unit cost on a large window.
- What’s behind the wall. Rot, a shifted header, or an old addition that threw the frame out of plumb adds framing repair before install. In this housing stock that’s common, and it’s worth budgeting a contingency of roughly 10 percent.
- Second-story or height access. Scaffolding and staging add labor on any window above the ground floor.
- Permit scope. A like-for-like replacement may not need a permit; cutting a new opening or changing the size of one usually does. Permit fees and plan-check are separate line items.
Every estimate we write is line-item and upfront – the number you see is the number you pay, with no change orders unless you ask for a scope change mid-job. Financing is 0% for 18 months, and projects over $10,000 get $1,000 off. What is not in a window quote: drywall patching and paint, structural repair if we find a failed header, and any stucco patching beyond the opening itself. We list those separately so there’s no surprise after demo.
See the difference
Before
After
Before
After
Before
AfterWhat West Whittier-Los Nietos Homes Do to This Job
This is a post-war unincorporated pocket, and that changes the job in ways you won’t hit a mile away. Most of the housing stock is 1940s – 1950s stucco-over-wood-frame on small lots, and a lot of those original tract shells have a piecemeal 1970s or 1980s addition tucked behind them, often DIY or loosely permitted. So before we order a single geometric unit, we have to reconcile the old and new framing – an arch that templates clean off the 1950 addition may hit a header in the original 1951 wall at a different height. That’s forensic remodeling, not a clean install, and it’s why we template in person rather than from a photo.
The other wrinkle is permitting. Because West Whittier-Los Nietos is unincorporated, most work here falls under LA County’s building department rather than the City of Whittier – so the same window job across the street can have a different plan-check timeline. We plan around that. The heat and Santa Ana wind exposure also matter: UV and heat cycling age the seals and finishes on west- and south-facing windows faster here, and winter rain will find a badly flashed arch the first season. We flash geometric units accordingly. If your window project comes with a wider exterior plan, homeowners often pair this with Concrete Driveways & Concrete Work in West Whittier-Los Nietos or Asphalt Driveways & Resurfacing in West Whittier-Los Nietos while the crew is already on site.
Serving West Whittier-Los Nietos, CA – Our Local Coverage Area
We serve West Whittier-Los Nietos and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in West Whittier-Los Nietos

Most jobs run three to six weeks from signed contract to final inspection, with two to three weeks of that being fabrication and two to four days being the install itself. The order doesn’t go in until the template is locked, so schedule delays come from late selections more than from the build. Call (888) 255-8179 for an exact timeline on your openings.
A like-for-like replacement in the same opening usually doesn’t require a permit; cutting a new opening or changing the size of an existing one does. Because this area is unincorporated, that permit comes through LA County’s building department, not the City of Whittier, and plan-check timelines reflect that. We tell you which side of that line your job falls on at the estimate.
Usually yes, as long as the new window fits the existing opening or is a pocket replacement into a sound frame. If the shape requires a new header or the wall framing has failed, that’s structural work and it gets quoted separately before we start. In this housing stock the frame condition is the wildcard – we check it during the template visit so there’s no surprise at demo.
A whole-home custom package runs $8,000 to $25,000, and a single feature window runs $1,800 to $6,500. Material grade, how many openings are non-rectangular, framing repair, and height access are the four things that move the number most. Call (888) 255-8179 for an exact quote – estimates are free and line-item.
Every installation is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right – one of the longest workmanship guarantees in the residential construction space. The window units themselves carry the manufacturer’s warranty on top of that. We’re licensed and insured, and our technicians are background-checked and arrive in uniform.
Get Your Custom & Geometric Windows Estimate
Call (888) 255-8179 to schedule a free on-site estimate for custom and geometric windows in West Whittier-Los Nietos. A live person answers 24/7 – no voicemail, no waiting until Monday. On the visit we template your openings, check the framing, and walk you through material options and a written line-item quote. You’ll know the real number before you order a single unit. Explore the wider scope through our Windows & Doors service, or see how we cover West Whittier-Los Nietos.
Written by the team at Groundwork Construction Co.












