







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Custom Windows Are Made: Field Measure to Installation for Downey, CA Homes
Custom windows are made by measuring the actual rough opening in your wall, submitting those dimensions along with your chosen frame profile, glass package and hardware to the manufacturer, and waiting while the factory builds a unit to those exact specs. At Andersen and Marvin, that order-to-delivery cycle usually runs 4 to 8 weeks depending on series and options. For a lot of Downey homeowners in 1950s and 1960s ranch homes, custom isn’t a luxury upgrade. It’s the only way to get a window that fits an opening nobody stocks. If you’re weighing a project now, call (888) 255-8179 to talk through sizing before you commit.
Key takeaways
- Field measurement, not the original blueprint, drives the custom order. Old homes move.
- Andersen 400 Series custom sizes and Marvin Elevate custom profiles are two different manufacturing paths with different lead times.
- Odd casements and 8-to-9-foot slider openings in Downey’s 1960s stock are common culprits behind a custom order.
- Manufacturer warranty covers the unit. The 730-Day Done Right Promise covers the installation workmanship.

Why Downey’s Older Ranch Tracts Push So Many Windows Into Custom Territory
Downey is a built-out, largely post-WWII inner-ring suburb, and most of the housing here is single-story 1940s-1960s ranch and Spanish-eclectic tract homes on tight lots. That combination means the work in this city is overwhelmingly remodel, addition, and second-story permitting rather than new construction. Windows follow the same pattern. The original tracts near Furman Park and the older 1950s neighborhoods were framed before today’s standard rough-opening dimensions were anyone’s priority, so a “standard” replacement window often leaves a visible gap or forces a clumsy filler strip.
On jobs around Downey, our technicians (who carry up to 12 years of experience) regularly field-measure an opening that comes back a half inch off nominal in one direction and three-eighths off in the other. Multiply that across a whole house of original windows and the custom decision makes itself. When you’re scheduling around Downey’s plan-check process for a larger remodel, the window lead time becomes a real planning constraint, not an afterthought. Our Windows & Doors team builds the order timeline into the project schedule for exactly that reason.
What “Custom” Actually Means at the Factory
Not every custom order is built the same way, and the difference affects both lead time and price. There are two basic manufacturing paths:
- Modified standard components (Andersen 400 Series custom sizes): The factory takes a standard extrusion and cuts it to your non-standard width and height. You get the same profile and hardware options as stock, just sized to your opening. This is the faster and usually less expensive route, and it resolves most odd-dimension casements and sliders in Downey’s older stock.
- Custom-fabricated frames and profiles (Marvin Elevate custom profiles): The frame, sash and profile are built to a non-standard spec that doesn’t map to a stock size at all. This is the right call for a historic-preservation-conscious remodel where the profile itself has to match the original look, or for very large openings such as 8-to-9-foot sliders that don’t exist in any catalog.
Both paths start the same way: a field measurement, not a tape measurement of the old sash. We measure the actual rough opening, confirm the wall depth and check for any settling that changed the opening since the house was framed. Then we submit the order with size, frame profile, glass package and hardware specs. From there, the factory takes over. Realistic production windows for Downey projects run 4 to 8 weeks depending on series and options, so if you’re pulling a permit for a larger project, we plan the window order for week one.

Custom Sizing vs. Rough-Opening Modification: When Each Makes Sense
Sometimes the more economical answer isn’t a custom window at all. If an opening is close enough to a standard size, reshaping the rough opening to fit a stock unit can cost less than the custom premium. The rule of thumb we use: if the difference is small and the wall is accessible during a broader remodel, modify the opening. If the difference is large, the wall is finished, or the opening is in a load-bearing wall, order the custom size. Pulling in on a rough opening that was framed in the 1950s is not a place to save a few hundred dollars if it means messing with the structural framing.
Glass Options That Matter in Downey’s Climate
Downey’s hot, dry inland summers with the marine layer burning off by late morning are hard on glass performance. The glass package is where a custom order earns its keep. On a custom order you’re not locked into one glass choice; you specify it by orientation.
- Low-e coating: We select the coating based on which way the window faces. East and west windows take the heavier solar control; north-facing windows can take a lighter coating to keep visible light high.
- SHGC rating: Solar heat gain coefficient is the number that matters on a hot inland summer. We choose the rating by orientation, not one blanket spec for the whole house.
- Tempered vs. laminated glass: California code requires safety glazing in specific locations, and openings near exterior doors are the usual trigger. We specify tempered or laminated where the code calls for it and confirm it on the order sheet before submission.
If your goal is impact-rated glazing for a specific zone, that changes both the glass spec and the lead time, so it’s worth a separate conversation before ordering. The full Downey service area page covers how these projects get scoped citywide.
Where Groundwork Fits in the Custom-Order Process
Groundwork Construction Co. of Downey manages the custom-order process end to end: field measure, order submission with full specs, receiving and inspection of the units before they go anywhere near the wall, and installation. That last inspection step matters. A custom unit that arrives with a defect or the wrong hardware spec is a multi-week setback, so we check every unit on the ground before installation starts. Homeowners who’ve been through a bad window order once tend to appreciate that check.
The manufacturer’s warranty covers the window itself. The installation workmanship is covered separately by our 730-Day Done Right Promise, which stands behind the labor even when the unit carries its own factory warranty. That separation is worth understanding before you sign anything, because a window failure and an installation failure are two different claims. If you want to see how this connects to a broader remodel, our kitchen and bath teams also handle the window portions of those projects so the schedule stays in one place. For a window-only project, expect custom window work to fall in the same general ballpark as the broader window line we quote for Downey homes, with the custom premium layered on top.
Zero financing for 18 months and a $1,000 discount on projects over $10,000 are the two standing promotions that most often apply to a whole-house window order, and calls are answered by a live person 24/7 so you can sort out timing on your schedule.
FAQs
Custom window orders for Downey homes typically take 4 to 8 weeks from order submission to delivery, depending on the series and options. Andersen 400 Series custom sizes usually land on the shorter end of that range; Marvin Elevate custom profiles and impact-rated glass tend to push toward the longer end. Call (888) 255-8179 to get a realistic timeline for your specific opening.
If the opening is close to a standard size and the wall is accessible during a broader remodel, reshaping the rough opening usually costs less than a custom unit. If the opening is in a load-bearing wall or the difference is large, custom sizing is the safer and more economical call. We confirm on site during a free measure before you commit – call (888) 255-8179 for an assessment.
Yes, if your windows face east or west and sit under Downey’s hot inland summer sun. Choosing low-e coating and a solar heat gain coefficient by orientation rather than accepting a one-size glass spec can meaningfully cut cooling load. The glass selection is a no-cost-to-low-cost part of the custom order, so it’s worth doing right. Call (888) 255-8179 to talk glass specs.
We inspect every custom unit before installation, and if it’s wrong it goes back to the factory before anything is cut or removed from your wall. That pre-installation inspection is the single most important step for keeping a custom order from turning into a months-long delay. For a project review, call (888) 255-8179.
Talk Through Your Window Project
If you’d rather have it looked at, Groundwork Construction Co. of Downey offers a no-pressure assessment in Downey – call (888) 255-8179. We’ll measure the opening, confirm whether stock or custom is the right path, and give you upfront pricing with no surprises before you commit a dollar.
Written by the team at Groundwork Construction Co. of Downey, serving Downey, CA.


