







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in South Whittier, CA: What the Job Really Involves
Impact windows and doors in South Whittier typically run $8,000 – $25,000 for a whole-house package, and a full replacement set is usually a two-to-three-week project from signed estimate to final inspection. The work means pulling out old glazing units and door slabs, checking and repairing the framing behind them, and setting new impact-rated assemblies rated to resist wind-borne debris. Call (888) 255-8179 for a free on-site estimate. Prices depend on how many openings you’re replacing and what we find once the old units come out.
How We Run an Impact Window & Door Project, Stage by Stage

Impact work is not a one-day swap. The sequence below is the one we follow on nearly every South Whittier job, and the durations are real ones – not the optimistic schedule some bids will show you.
Stage 1 – Site measure and product selection (day 1, about 90 minutes). We measure every opening, photograph the interior and exterior trim, and check what’s behind the existing units. You decide the product line, glass package, and frame color at this meeting. This is also when we confirm whether the openings are plumb and square or need framing correction.
Stage 2 – Permit filing and order (days 2 – 5). Because South Whittier is unincorporated, plans and permits go through LA County Public Works rather than a city building department, so filing and inspection scheduling look different than they do in neighboring Whittier or Santa Fe Springs. We handle the submittal. Lead time on the units themselves usually runs three to six weeks depending on the product line.
Stage 3 – Delivery and prep (day 1 of install). Units arrive, we stage them, and we lay drop cloths and seal off the work zones. Existing windows and doors come out, and the rough openings get inspected. If we find rotted framing, undersized headers, or old termite damage, that’s the moment it surfaces – and the moment we tell you before we go further.
Stage 4 – Installation (days 2 – 4 for a typical whole-house package). New units go in with proper flashing, shimming, and insulation. Doors get hung, squared, and adjusted for a clean swing. You decide the interior trim style and whether you want us to handle paint touch-up or leave it to your painter.
Stage 5 – Inspection and walkthrough (days 5 – 7). The county inspection is scheduled, we correct anything the inspector flags, and then we walk the job with you. Every window opens and closes, every lock engages, and every door seals. That walkthrough is where the 730-Day Done Right Promise starts its clock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Be Choosing Between
Impact-rated products aren’t a single thing. Here’s what the choice looks like on a South Whittier house:
- Frame material – vinyl vs. aluminum vs. wood-clad. Vinyl is the value play and holds up well in our climate, but the profile is thicker. Aluminum is slimmer and looks closer to original on older homes. Wood-clad (Andersen and Marvin are the lines we install most) is the premium option and the best match for 1940s – 50s stucco houses that were built with wood windows originally. Cost climbs with each step up.
- Glass package. Impact glass comes laminated or with a laminated inner pane. You’ll choose between clear, tinted, and low-E coatings. Low-E cuts summer heat gain, which matters in South Whittier’s hot, dry summers, but it adds cost per opening.
- Opening style. Single-hung, casement, slider, and fixed units all come in impact-rated versions. Casements seal tighter but cost more and take up swing space. Sliders work well for patio doors.
- Door type. Entry doors, patio sliders, and French doors each need their own impact-rated hardware and threshold. A standard door slab won’t pass; you’re buying a rated assembly.
- Finish and trim. Interior trim, exterior casing, and hardware finish are decisions you’ll make. We can match existing trim profiles on older homes, which adds a little labor but keeps the house looking consistent.
What Impact Windows & Doors Cost in South Whittier, CA

Expect $8,000 – $25,000 for a full impact window and door package on a typical South Whittier home. Here’s how the number breaks down and what moves it:
| Scope | Typical range |
|---|---|
| Whole-house impact window package | $8,000 – $25,000 |
| Standard window replacement (non-impact) | $4,500 – $15,000 |
Four things push a job toward the high end:
- Number of openings. A 1,200 sq ft house with eight windows and two doors sits near the bottom of the range. A larger home with 15-plus openings goes toward the top.
- Frame condition behind the old units. Rotted framing, undersized headers, or old termite damage adds framing labor and material.
- Glass package. Low-E and tinted options add cost per opening; standard clear impact glass is the base price.
- Door count and type. Entry doors and patio sliders cost more than windows and require their own rated hardware.
A written estimate from us itemizes every opening, the glass package, the frame material, permits, and disposal. What it won’t cover is framing repair found after demo – we flag that in writing before we start, and the price doesn’t change without your sign-off. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat South Whittier’s Housing Stock Does to This Job
South Whittier is an unincorporated pocket of mostly 1940s – 60s single-story stucco tract homes on 6,000 – 8,000 sq ft lots, and that build era shows up in the windows. Original wood double-hungs, aluminum sliders from the 1960s, and single-pane picture windows are everywhere. Many of these homes still have their original 1940s – 50s framing, and pulling old units out frequently reveals undersized headers or knob-and-tube wiring that needs to come up to current code before the new units go in. The permitting piece is different here too: because South Whittier is unincorporated LA County, plans and permits go through LA County Public Works rather than a city building department, so inspection scheduling runs on the county’s clock, not a city’s. Santa Ana wind events and the hot, dry summers have pushed a lot of homeowners toward impact-rated assemblies in the first place, and matching new trim to the original 1950s profiles keeps the house looking right from the street. Our windows & doors service handles the full package, and if you’re already planning a larger exterior project, this is often part of a full Windows & Doors in South Whittier scope. Homeowners often pair this with Aluminum Fence in South Whittier or Iron Fence in South Whittier to finish the exterior. We work throughout South Whittier, and if you want the broader picture, start at our Windows & Doors hub.
Serving South Whittier, CA – Our Local Coverage Area
We serve South Whittier and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in South Whittier

A whole-house package usually takes two to three weeks from signed estimate to final inspection, with installation itself running two to four days. The longer stretch is lead time on the units – typically three to six weeks depending on the product line. Call (888) 255-8179 for a schedule specific to your house.
Yes. Because South Whittier is unincorporated, the permit goes through LA County Public Works, not a city building department. We pull the permit and schedule the inspection as part of the job – you don’t file anything yourself. Call (888) 255-8179 to start the estimate.
Expect $8,000 – $25,000 for a full package, with standard window replacement running $4,500 – $15,000 if you’re not going impact-rated. The number moves most with opening count and frame condition behind the old units. Call (888) 255-8179 for an exact quote – estimates are free.
In most cases, yes. We use a pocket or insert method that leaves the existing interior and exterior trim in place when the openings are plumb and square. If the framing is out of square, we’ll tell you before we start and quote the repair. Call (888) 255-8179 and we’ll look at your openings on site.
Every impact window and door project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. The product manufacturer’s warranty runs alongside it. Call (888) 255-8179 to review the details before you sign anything.
Get a Free Impact Window & Door Estimate in South Whittier
Call (888) 255-8179 to schedule your free on-site estimate for impact windows and doors in South Whittier. A live person answers the phone, 24/7. On the visit, we’ll measure every opening, walk you through the product options, and hand you a written line-item quote with permits and disposal included. No change orders, no surprises. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co. of Downey.












