A Groundwork company - serving Downey, CA
A backyard with a new horizontal privacy fence
Iron Fence · Lakewood, CA

Iron Fence in Lakewood - Written Price Per Foot, Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Downey
A new wood side gate with black hardware
A new white vinyl privacy fence with a double gate
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Lakewood, CA: What It Costs and How Long It Takes

An iron fence in Lakewood, CA typically runs $3,500 – $9,000 for a standard residential run, with most single-story tract homes landing between $4,200 and $6,800 depending on linear footage, height, and finish. Plan on two to four days on site for a typical 100 – 150 foot ornamental run: one day to set posts in concrete, a second to hang panels and gates, and a half day for finish and touch-up. Call (888) 255-8179 to schedule a free on-site estimate and get an exact number for your property line.

Call (888) 255-8179

How We Build an Iron Fence, Stage by Stage

A new stained cedar privacy fence

Iron work is a sequencing job. The fence is only as straight as the post line, and the post line is only as good as the measuring and layout that precedes it. Here’s what actually happens on a Lakewood job.

Stage 1: Site walk and layout (half a day). We measure the full run, mark the property line with the homeowner present, and confirm gate swings, post spacing, and height against any HOA rules. You decide panel style, height (usually 4, 5, or 6 feet), and gate placement at this stage. On a 1950s slab-and-stucco tract home, we also check where the fence will tie into existing walls, since the original stucco has often been patched or painted over multiple times.

Stage 2: Digging and setting posts (one full day). Post holes go down 24 – 30 inches, below the frost-free depth for this part of the LA Basin, and get set in concrete. This is the day that defines the whole job. If the ground runs into an old stub wall, tree roots, or the sidewalk easement, we adjust the line before any concrete is poured. You’ll want to be around for this day if you can; it’s the one point where a small change is cheap and everything after it is not.

Stage 3: Panel and gate installation (one to two days). Once the concrete has cured, which is 24 – 48 hours depending on weather, panels get set, leveled, and fastened. Gates go in last so they can be shimmed against the finished posts. Weld or bolt connections are made to spec, and moving parts get checked for swing clearance. You decide gate hardware (self-closing, latch style, hinge grade) at the start of this stage.

Stage 4: Finish and touch-up (half a day). Weld points get primed and coated, hardware gets checked, and the fence gets a final walk. On a powder-coated or painted iron fence, we touch up every spot we drilled or fastened. That’s the difference between a fence that rusts at the weld in year three and one that holds its finish through a decade of Santa Ana wind and marine-layer moisture.

Stage 5: Final walkthrough (one to two hours). We walk the line with you, check gate operation, confirm heights, and hand over the workmanship paperwork under the 730-Day Done Right Promise. If anything shifts or a hinge loosens in the first two years, we come back and fix it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between on an Iron Fence

The biggest decisions on an iron fence are material grade, finish, and construction method. The trade-off isn’t really about style; it’s about how the fence holds up against moisture and wind over time.

  • Wrought iron (solid, hand-forged): The most durable option and the most expensive. Heavy, hand-welded, and built to last decades. Suits homeowners who want a legacy fence and are willing to pay for it. Also the right call where the fence has to match an existing gate or architectural piece.
  • Steel ornamental (tubular steel, welded or bolted): The standard choice for most Lakewood homes. Lighter than true wrought iron, holds up well, and costs meaningfully less per foot. The honest trade-off: cheaper tubular steel with a thin finish can start to rust at the weld and at ground contact in five to seven years in this climate.
  • Powder-coated vs. painted finish: Powder coat is baked on and lasts far longer than liquid paint. It adds cost up front and saves repainting later. Painted finishes look good initially but need touch-up every few years, especially on the side facing the marine layer.
  • Aluminum-look iron (cast aluminum): Lighter, will not rust, and holds a finish well. It’s a good fit for homeowners who want the iron look without the rust maintenance. The trade-off is that cast aluminum won’t take a hard impact the way steel will, so it’s less the choice for a driveway gate that gets bumped.
  • Height and gate configuration: 4-foot runs cost less than 5- or 6-foot runs per foot, and a single walk gate is far cheaper than a driveway double gate. Most Lakewood homes go with a 4- or 5-foot front-yard run and a single 3-foot walk gate.

What Iron Fence Costs in Lakewood, CA

A remodeled family room with new windows and a window seat

Iron fence pricing in Lakewood runs $3,500 – $9,000 for a standard residential install. Where a project lands inside that range comes down to four or five variables that actually move the number.

  • Linear footage: The single biggest driver. Most Lakewood front yards run 80 – 150 feet of fence line, and every foot adds cost for both material and labor.
  • Height and grade: 4-foot tubular steel is the low end; 6-foot wrought iron with hand-forged pickets is the high end. A step up in grade can double the per-foot material cost.
  • Gate count and gate type: A single walk gate adds modestly; a driveway double gate with automation can push a project toward the top of the range or beyond it.
  • Finish: Powder coat adds cost up front but avoids repainting. A liquid-painted finish is cheaper today and more expensive over ten years.
  • Site conditions: Sloped lines, tree roots, old concrete, or a fence running along a shared property line with a neighbor’s unrepaired wall can add prep time. We quote it in writing before we dig so the number doesn’t move mid-job.

Every written estimate is line-itemed: posts, panels, gates, hardware, finish, and labor. We pull any required permits and the price you see is the price you pay, with no change orders unless you ask for a scope change. Our fence installation service pairs well with a fresh gate and entry, and homeowners often pair an iron fence with a new walkway from Patios, Walkways & Pool Decks in Lakewood so the whole entry reads as one design.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Lakewood’s 1950s Tract Homes Do to an Iron Fence Job

Almost every home here was built between 1950 and 1955 as part of one of America’s first planned communities, and those slab-on-grade tract houses have their own quirks once you start digging post holes. The original property lines often run along old stub walls, and the clay sewer laterals buried under the front yard are now at the age where a post hole can find one. We locate before we dig on every Lakewood job. The original 2×4 roof framing and single-pane windows are the front of the house; the fence is the back of the project’s story, and the two affect each other when a fence is being hung against patched stucco. The marine layer and Santa Ana wind cycles are the other half of the picture: they push moisture and grit against the fence finish, which is why we recommend a coated grade in Lakewood over a painted one. If your project grows into a full property re-do, we’d steer you to Fence Installation in Lakewood for the wider scope, and to ADU Design & Permitting in Lakewood if a garage conversion is also on the table. We cover the Lakewood ZIP codes 90712, 90713, 90714, and 90715.

Serving Lakewood, CA – Our Local Coverage Area

We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Iron Fence in Lakewood

A standing-seam metal roof over a covered porch

Get a Free On-Site Estimate for Your Iron Fence in Lakewood

Call (888) 255-8179 and we’ll set up a free on-site estimate for your iron fence in Lakewood. A live person answers around the clock, so you’re not waiting on a callback. On the visit we measure the line, confirm gate swing and height, walk you through finish options, and leave you with a written line-item price: the number you see is the number you pay. Estimates are free, and financing is available at 0% for 18 months if you want to spread the cost.

Written by the team at Groundwork Construction Co.

Why Lakewood Chooses Groundwork Construction Co. of Downey

We set the standard for iron fence in Lakewood.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Lakewood

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Lakewood Customers Say

Trusted by homeowners across Lakewood and surrounding areas.

★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett
★★★★★

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

Dev Sharma

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new casement window over a kitchen sinkNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioA new clay tile roof

More services in Lakewood

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Downey

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Downey team

A local vetted partner works across Downey and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Iron Fence in Lakewood?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Lakewood.

(888) 255-8179

Request a Free Estimate in Lakewood

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch